[PATCH v4] ARM: dts: add DT for lan966 SoC and 2-port board pcb8291
Kavyasree.Kotagiri at microchip.com
Kavyasree.Kotagiri at microchip.com
Fri Feb 18 02:55:50 PST 2022
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the
> content is safe
>
> Hi,
>
> > arch/arm/boot/dts/Makefile | 2 +
> > arch/arm/boot/dts/lan966x.dtsi | 237 ++++++++++++++++++++++++++
> > arch/arm/boot/dts/lan966x_pcb8291.dts | 61 +++++++
>
> Please rename this to lan966x-pcb8921.dts. All (most?) of the device
> tree files use the dash as a seperator between the SoC and the board.
>
Ok. I will change it.
> > diff --git a/arch/arm/boot/dts/lan966x.dtsi
> b/arch/arm/boot/dts/lan966x.dtsi
> > new file mode 100644
> > index 000000000000..91ee9e0684f4
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/lan966x.dtsi
> > @@ -0,0 +1,237 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
> > + *
> > + * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
> > + *
> > + * Author: Kavyasree Kotagiri <kavyasree.kotagiri at microchip.com>
> > + *
> > + */
> > +
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/mfd/atmel-flexcom.h>
> > +#include <dt-bindings/dma/at91.h>
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/clock/microchip,lan966x.h>
> > +
> > +/ {
> > + model = "Microchip LAN966 family SoC";
> > + compatible = "microchip,lan966";
>
> Undocumented compatible string. I see that the actual board
> is documented in
> Documentation/devicetree/bindings/arm/atmel-at91.yaml
>
> But as Arnd mentioned, this doesn't really make sense here
> as you have to override it in the actual board dts anyway.
>
> > + interrupt-parent = <&gic>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + cpus {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + cpu at 0 {
> > + device_type = "cpu";
> > + compatible = "arm,cortex-a7";
> > + clock-frequency = <600000000>;
> > + reg = <0x0>;
> > + };
> > + };
> > +
> > + clocks {
> > + sys_clk: sys_clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <162500000>;
> > + };
> > +
> > + cpu_clk: cpu_clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <600000000>;
> > + };
> > +
> > + ddr_clk: ddr_clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <300000000>;
> > + };
> > +
> > + nic_clk: nic_clk {
> > + compatible = "fixed-clock";
> > + #clock-cells = <0>;
> > + clock-frequency = <200000000>;
> > + };
> > + };
> > +
> > + clks: clock-controller at e00c00a8 {
> > + compatible = "microchip,lan966x-gck";
> > + #clock-cells = <1>;
> > + clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
> > + clock-names = "cpu", "ddr", "sys";
> > + reg = <0xe00c00a8 0x38>;
> > + };
> > +
> > + timer {
> > + compatible = "arm,armv7-timer";
> > + interrupt-parent = <&gic>;
> > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) |
> IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) |
> IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) |
> IRQ_TYPE_LEVEL_LOW)>,
> > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) |
> IRQ_TYPE_LEVEL_LOW)>;
> > + clock-frequency = <37500000>;
> > + arm,cpu-registers-not-fw-configured;
> > + };
> > +
> > + soc {
> > + compatible = "simple-bus";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + flx0: flexcom at e0040000 {
> > + compatible = "atmel,sama5d2-flexcom";
>
> Are these expected to be exactly the same between the lan966x and the
> sama5d2 or do you need something like
>
> compatible = "microchip,lan966x-flexcom", "atmel,sama5d2-flexcom";
>
> for the case when you need to make SoC specific settings/workarounds?
>
Yes, it is the same. No workarounds required.
> > + reg = <0xe0040000 0x100>;
> > + clocks = <&clks GCK_ID_FLEXCOM0>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xe0040000 0x800>;
> > + status = "disabled";
> > + };
> > +
> > + flx1: flexcom at e0044000 {
> > + compatible = "atmel,sama5d2-flexcom";
> > + reg = <0xe0044000 0x100>;
> > + clocks = <&clks GCK_ID_FLEXCOM1>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xe0044000 0x800>;
> > + status = "disabled";
> > + };
> > +
> > + trng: trng at e0048000 {
>
> Tudor already mentioned this..
>
> > + compatible = "atmel,at91sam9g45-trng";
> > + reg = <0xe0048000 0x100>;
> > + clocks = <&nic_clk>;
> > + };
> > +
> > + aes: aes at e004c000 {
>
> .. and this ..
>
> > + compatible = "atmel,at91sam9g46-aes";
> > + reg = <0xe004c000 0x100>;
> > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
> > + dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
> > + <&dma0 AT91_XDMAC_DT_PERID(12)>;
> > + dma-names = "rx", "tx";
> > + clocks = <&nic_clk>;
> > + clock-names = "aes_clk";
> > + };
> > +
> > + flx2: flexcom at e0060000 {
> > + compatible = "atmel,sama5d2-flexcom";
> > + reg = <0xe0060000 0x100>;
> > + clocks = <&clks GCK_ID_FLEXCOM2>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xe0060000 0x800>;
> > + status = "disabled";
> > + };
> > +
> > + flx3: flexcom at e0064000 {
> > + compatible = "atmel,sama5d2-flexcom";
> > + reg = <0xe0064000 0x100>;
> > + clocks = <&clks GCK_ID_FLEXCOM3>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xe0064000 0x800>;
> > + status = "disabled";
> > +
> > + usart3: serial at 200 {
> > + compatible = "atmel,at91sam9260-usart";
> > + reg = <0x200 0x200>;
> > + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&nic_clk>;
> > + clock-names = "usart";
> > + atmel,fifo-size = <32>;
> > + status = "disabled";
> > + };
> > + };
> > +
> > + dma0: dma-controller at e0068000 {
> > + compatible = "microchip,sama7g5-dma";
> > + reg = <0xe0068000 0x1000>;
> > + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
> > + #dma-cells = <1>;
> > + clocks = <&nic_clk>;
> > + clock-names = "dma_clk";
> > + };
> > +
> > + sha: sha at e006c000 {
>
> .. and this one.
>
> > + compatible = "atmel,at91sam9g46-sha";
> > + reg = <0xe006c000 0xec>;
> > + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> > + dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
> > + dma-names = "tx";
> > + clocks = <&nic_clk>;
> > + clock-names = "sha_clk";
> > + };
> > +
> > + flx4: flexcom at e0070000 {
> > + compatible = "atmel,sama5d2-flexcom";
> > + reg = <0xe0070000 0x100>;
> > + clocks = <&clks GCK_ID_FLEXCOM4>;
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges = <0x0 0xe0070000 0x800>;
> > + status = "disabled";
> > + };
> > +
> > + timer0: timer at e008c000 {
> > + compatible = "snps,dw-apb-timer";
> > + reg = <0xe008c000 0x400>;
> > + clocks = <&nic_clk>;
> > + clock-names = "timer";
> > + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
> > + };
> > +
> > + watchdog: watchdog at e0090000 {
> > + compatible = "snps,dw-wdt";
> > + reg = <0xe0090000 0x1000>;
> > + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&nic_clk>;
> > + };
> > +
> > + can0: can at e081c000 {
> > + compatible = "bosch,m_can";
> > + reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
> > + reg-names = "m_can", "message_ram";
> > + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
> > + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-names = "int0", "int1";
> > + clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
> > + clock-names = "hclk", "cclk";
> > + assigned-clocks = <&clks GCK_ID_MCAN0>;
> > + assigned-clock-rates = <40000000>;
> > + bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
> > + status = "disabled";
> > + };
> > +
> > + gpio: pinctrl at e2004064 {
> > + compatible = "microchip,lan966x-pinctrl";
> > + reg = <0xe2004064 0xb4>,
> > + <0xe2010024 0x138>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > + gpio-ranges = <&gpio 0 0 78>;
> > + interrupt-controller;
> > + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> > + #interrupt-cells = <2>;
> > + };
> > +
> > + gic: interrupt-controller at e8c11000 {
> > + compatible = "arm,gic-400", "arm,cortex-a7-gic";
> > + #interrupt-cells = <3>;
> > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> > + interrupt-controller;
> > + reg = <0xe8c11000 0x1000>,
> > + <0xe8c12000 0x2000>,
> > + <0xe8c14000 0x2000>,
> > + <0xe8c16000 0x2000>;
> > + };
> > + };
> > +};
>
> Overall most of the referenced bindings lack a proper yaml version :/
>
> -michael
More information about the linux-arm-kernel
mailing list