(subset) [PATCH v3 5/6] clk: sunxi-ng: Add support for the sun6i RTC clocks
Stephen Boyd
sboyd at kernel.org
Thu Feb 17 16:33:37 PST 2022
Quoting Alexandre Belloni (2022-02-12 15:24:02)
> On 11/02/2022 13:43:12+0100, Maxime Ripard wrote:
> > Hi Samuel,
> >
> > On Mon, Feb 07, 2022 at 05:54:02PM -0600, Samuel Holland wrote:
> > > On 2/7/22 3:00 AM, Maxime Ripard wrote:
> > > > On Wed, 2 Feb 2022 20:17:35 -0600, Samuel Holland wrote:
> > > >> The RTC power domain in sun6i and newer SoCs manages the 16 MHz RC
> > > >> oscillator (called "IOSC" or "osc16M") and the optional 32 kHz crystal
> > > >> oscillator (called "LOSC" or "osc32k"). Starting with the H6, this power
> > > >> domain also handles the 24 MHz DCXO (called variously "HOSC", "dcxo24M",
> > > >> or "osc24M") as well. The H6 also adds a calibration circuit for IOSC.
> > > >>
> > > >> Later SoCs introduce further variations on the design:
> > > >> - H616 adds an additional mux for the 32 kHz fanout source.
> > > >> - R329 adds an additional mux for the RTC timekeeping clock, a clock
> > > >> for the SPI bus between power domains inside the RTC, and removes the
> > > >> IOSC calibration functionality.
> > > >>
> > > >> [...]
> > > >
> > > > Applied to local tree (sunxi/clk-for-5.18).
> > >
> > > Part of the build failures were because this patch depends on patch 3. Is that
> > > okay, or should I update this patch to be independent?
> >
> > We don't have anything queued up yet, so I think the easiest would be to
> > merge this through the RTC tree. So nothing to do on your side yet, we
> > just need Alex to answer :)
> >
>
> I can take the whole series but I think I would need acks from Stephen
>
For the clk patches
Acked-by: Stephen Boyd <sboyd at kernel.org>
More information about the linux-arm-kernel
mailing list