[PATCH v2] net: ethernet: xilinx: cleanup comments

[trix at redhat.com]

From: Tom Rix <trix at redhat.com>

Remove the second 'the'.
Replacements:
endiannes to endianness
areconnected to are connected
Mamagement to Management
undoccumented to undocumented
Xilink to Xilinx
strucutre to structure

Change kernel-doc comment style to c style for
/* Management ...

Signed-off-by: Tom Rix <trix at redhat.com>
Reviewed-by: Michal Simek <michal.simek at xilinx.com>
---
v2: Change the /** to /* 
    Add Michal's Reviewed-by: tag

 drivers/net/ethernet/xilinx/Kconfig               | 2 +-
 drivers/net/ethernet/xilinx/ll_temac.h            | 4 ++--
 drivers/net/ethernet/xilinx/ll_temac_main.c       | 2 +-
 drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
 drivers/net/ethernet/xilinx/xilinx_emaclite.c     | 2 +-
 5 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
index 911b5ef9e680..0014729b8865 100644
--- a/drivers/net/ethernet/xilinx/Kconfig
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 #
-# Xilink device configuration
+# Xilinx device configuration
 #
 
 config NET_VENDOR_XILINX
diff --git a/drivers/net/ethernet/xilinx/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
index 4a73127e10a6..c6395c406418 100644
--- a/drivers/net/ethernet/xilinx/ll_temac.h
+++ b/drivers/net/ethernet/xilinx/ll_temac.h
@@ -271,7 +271,7 @@ This option defaults to enabled (set) */
 
 #define XTE_TIE_OFFSET			0x000003A4 /* Interrupt enable */
 
-/**  MII Mamagement Control register (MGTCR) */
+/* MII Management Control register (MGTCR) */
 #define XTE_MGTDR_OFFSET		0x000003B0 /* MII data */
 #define XTE_MIIMAI_OFFSET		0x000003B4 /* MII control */
 
@@ -283,7 +283,7 @@ This option defaults to enabled (set) */
 
 #define STS_CTRL_APP0_ERR         (1 << 31)
 #define STS_CTRL_APP0_IRQONEND    (1 << 30)
-/* undoccumented */
+/* undocumented */
 #define STS_CTRL_APP0_STOPONEND   (1 << 29)
 #define STS_CTRL_APP0_CMPLT       (1 << 28)
 #define STS_CTRL_APP0_SOP         (1 << 27)
diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
index b900ab5aef2a..7171b5cdec26 100644
--- a/drivers/net/ethernet/xilinx/ll_temac_main.c
+++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
@@ -1008,7 +1008,7 @@ static void ll_temac_recv(struct net_device *ndev)
 		    (skb->len > 64)) {
 
 			/* Convert from device endianness (be32) to cpu
-			 * endiannes, and if necessary swap the bytes
+			 * endianness, and if necessary swap the bytes
 			 * (back) for proper IP checksum byte order
 			 * (be16).
 			 */
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index de0a6372ae0e..6eeaab77fbe0 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -537,7 +537,7 @@ static int __axienet_device_reset(struct axienet_local *lp)
  * This function is called to reset and initialize the Axi Ethernet core. This
  * is typically called during initialization. It does a reset of the Axi DMA
  * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines
- * areconnected to Axi Ethernet reset lines, this in turn resets the Axi
+ * are connected to Axi Ethernet reset lines, this in turn resets the Axi
  * Ethernet core. No separate hardware reset is done for the Axi Ethernet
  * core.
  * Returns 0 on success or a negative error number otherwise.
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 519599480b15..f65a638b7239 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -498,7 +498,7 @@ static void xemaclite_update_address(struct net_local *drvdata,
  * @dev:	Pointer to the network device instance
  * @address:	Void pointer to the sockaddr structure
  *
- * This function copies the HW address from the sockaddr strucutre to the
+ * This function copies the HW address from the sockaddr structure to the
  * net_device structure and updates the address in HW.
  *
  * Return:	Error if the net device is busy or 0 if the addr is set
-- 
2.26.3