[PATCH v2] arm64: dts: ti: k3-j721e-common-proc-board: Enable PCIe + QSGMII multilink configuration

[Kishon Vijay Abraham I]

Hi Aswath, Swapnil,

On 02/02/22 10:09 am, Aswath Govindraju wrote:
> From: Swapnil Jakhade <sjakhade at cadence.com>
> 
> The zeroth instance of SerDes on J721E common processor board will be
> shared between PCIe and QSGMII. Therefore, add support for enabling this.
> 
> Signed-off-by: Swapnil Jakhade <sjakhade at cadence.com>
> Signed-off-by: Aswath Govindraju <a-govindraju at ti.com>
> ---
> 
> changes since v1:
> - Fixed the commit message.
> 
>  .../boot/dts/ti/k3-j721e-common-proc-board.dts    | 15 ++++++++++++---
>  1 file changed, 12 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> index 2d7596911b27..157d86dc2824 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> @@ -431,7 +431,7 @@
>  };
>  
>  &serdes_ln_ctrl {
> -	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
> +	idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>,
>  		      <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
>  		      <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
>  		      <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,

This change will kick-in errata i2183
https://www.ti.com/lit/er/sprz455a/sprz455a.pdf

This will break PCIe endpoint mode. Let's get the errata workaround merged
before this.

Thanks,
Kishon

> @@ -757,8 +757,8 @@
>  };
>  
>  &serdes0 {
> -	assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
> -	assigned-clock-parents = <&wiz0_pll1_refclk>;
> +	assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>;
> +	assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>;
>  
>  	serdes0_pcie_link: phy at 0 {
>  		reg = <0>;
> @@ -767,6 +767,15 @@
>  		cdns,phy-type = <PHY_TYPE_PCIE>;
>  		resets = <&serdes_wiz0 1>;
>  	};
> +
> +	serdes0_qsgmii_link: phy at 1 {
> +		reg = <1>;
> +		cdns,num-lanes = <1>;
> +		#phy-cells = <0>;
> +		cdns,phy-type = <PHY_TYPE_QSGMII>;
> +		resets = <&serdes_wiz0 2>;
> +	};
> +
>  };
>  
>  &serdes1 {
>