[PATCH v5 22/23] drm: rockchip: Add VOP2 driver
Dmitry Osipenko
dmitry.osipenko at collabora.com
Wed Feb 16 04:23:32 PST 2022
16.02.2022 14:22, Sascha Hauer пишет:
> On Wed, Feb 16, 2022 at 01:39:33PM +0300, Dmitry Osipenko wrote:
>> 09.02.2022 12:53, Sascha Hauer пишет:
>>> +static void vop2_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state)
>>> +{
>>> + struct drm_plane_state *pstate = plane->state;
>>> + struct drm_crtc *crtc = pstate->crtc;
>>> + struct vop2_win *win = to_vop2_win(plane);
>>> + struct vop2_video_port *vp = to_vop2_video_port(crtc);
>>> + struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
>>> + struct vop2 *vop2 = win->vop2;
>>> + struct drm_framebuffer *fb = pstate->fb;
>>> + uint32_t bpp = fb->format->cpp[0] * 8;
>>> + uint32_t actual_w, actual_h, dsp_w, dsp_h;
>>> + uint32_t act_info, dsp_info;
>>> + uint32_t format;
>>> + uint32_t afbc_format;
>>> + uint32_t rb_swap;
>>> + uint32_t uv_swap;
>>> + struct drm_rect *src = &pstate->src;
>>> + struct drm_rect *dest = &pstate->dst;
>>> + uint32_t afbc_tile_num;
>>> + uint32_t transform_offset;
>>> + bool dither_up;
>>> + bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X;
>>> + bool ymirror = pstate->rotation & DRM_MODE_REFLECT_Y;
>>> + bool rotate_270 = pstate->rotation & DRM_MODE_ROTATE_270;
>>> + bool rotate_90 = pstate->rotation & DRM_MODE_ROTATE_90;
>>> + struct rockchip_gem_object *rk_obj;
>>> + unsigned long offset;
>>> + bool afbc_en;
>>> + dma_addr_t yrgb_mst;
>>> + dma_addr_t uv_mst;
>>> +
>>> + /*
>>> + * can't update plane when vop2 is disabled.
>>> + */
>>> + if (WARN_ON(!crtc))
>>> + return;
>>> +
>>> + if (!pstate->visible) {
>>> + vop2_plane_atomic_disable(plane, state);
>>> + return;
>>> + }
>>> +
>>> + afbc_en = rockchip_afbc(plane, fb->modifier);
>>> +
>>> + offset = (src->x1 >> 16) * fb->format->cpp[0];
>>> +
>>> + /*
>>> + * AFBC HDR_PTR must set to the zero offset of the framebuffer.
>>> + */
>>> + if (afbc_en)
>>> + offset = 0;
>>> + else if (pstate->rotation & DRM_MODE_REFLECT_Y)
>>> + offset += ((src->y2 >> 16) - 1) * fb->pitches[0];
>>> + else
>>> + offset += (src->y1 >> 16) * fb->pitches[0];
>>> +
>>> + rk_obj = to_rockchip_obj(fb->obj[0]);
>>> +
>>> + yrgb_mst = rk_obj->dma_addr + offset + fb->offsets[0];
>>> + if (fb->format->is_yuv) {
>>> + int hsub = fb->format->hsub;
>>> + int vsub = fb->format->vsub;
>>> +
>>> + offset = (src->x1 >> 16) * fb->format->cpp[1] / hsub;
>>> + offset += (src->y1 >> 16) * fb->pitches[1] / vsub;
>>> +
>>> + if ((pstate->rotation & DRM_MODE_REFLECT_Y) && !afbc_en)
>>> + offset += fb->pitches[1] * ((pstate->src_h >> 16) - 2) / vsub;
>>> +
>>> + rk_obj = to_rockchip_obj(fb->obj[0]);
>>> + uv_mst = rk_obj->dma_addr + offset + fb->offsets[1];
>>> + }
>>> +
>>> + actual_w = drm_rect_width(src) >> 16;
>>> + actual_h = drm_rect_height(src) >> 16;
>>> + dsp_w = drm_rect_width(dest);
>>> +
>>> + if (dest->x1 + dsp_w > adjusted_mode->hdisplay) {
>>> + drm_err(vop2->drm, "vp%d %s dest->x1[%d] + dsp_w[%d] exceed mode hdisplay[%d]\n",
>>> + vp->id, win->data->name, dest->x1, dsp_w, adjusted_mode->hdisplay);
>>> + dsp_w = adjusted_mode->hdisplay - dest->x1;
>>> + if (dsp_w < 4)
>>> + dsp_w = 4;
>>> + actual_w = dsp_w * actual_w / drm_rect_width(dest);
>>> + }
>>> +
>>> + dsp_h = drm_rect_height(dest);
>>> +
>>> + if (dest->y1 + dsp_h > adjusted_mode->vdisplay) {
>>> + drm_err(vop2->drm, "vp%d %s dest->y1[%d] + dsp_h[%d] exceed mode vdisplay[%d]\n",
>>> + vp->id, win->data->name, dest->y1, dsp_h, adjusted_mode->vdisplay);
>>> + dsp_h = adjusted_mode->vdisplay - dest->y1;
>>> + if (dsp_h < 4)
>>> + dsp_h = 4;
>>> + actual_h = dsp_h * actual_h / drm_rect_height(dest);
>>> + }
>>> +
>>> + /*
>>> + * This is workaround solution for IC design:
>>> + * esmart can't support scale down when actual_w % 16 == 1.
>>> + */
>>> + if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
>>> + if (actual_w > dsp_w && (actual_w & 0xf) == 1) {
>>> + drm_err(vop2->drm, "vp%d %s act_w[%d] MODE 16 == 1\n", vp->id, win->data->name, actual_w);
>>> + actual_w -= 1;
>>> + }
>>> + }
>>> +
>>> + if (afbc_en && actual_w % 4) {
>>> + drm_err(vop2->drm, "vp%d %s actual_w[%d] should align as 4 pixel when enable afbc\n",
>>> + vp->id, win->data->name, actual_w);
>>> + actual_w = ALIGN_DOWN(actual_w, 4);
>>> + }
>>> +
>>> + act_info = (actual_h - 1) << 16 | ((actual_w - 1) & 0xffff);
>>> + dsp_info = (dsp_h - 1) << 16 | ((dsp_w - 1) & 0xffff);
>>> +
>>> + format = vop2_convert_format(fb->format->format);
>>> +
>>> + drm_dbg(vop2->drm, "vp%d update %s[%dx%d->%dx%d@%dx%d] fmt[%p4cc_%s] addr[%pad]\n",
>>> + vp->id, win->data->name, actual_w, actual_h, dsp_w, dsp_h,
>>> + dest->x1, dest->y1,
>>> + &fb->format->format,
>>> + afbc_en ? "AFBC" : "", &yrgb_mst);
>>> +
>>> + if (afbc_en) {
>>> + uint32_t stride;
>>> +
>>> + /* the afbc superblock is 16 x 16 */
>>> + afbc_format = vop2_convert_afbc_format(fb->format->format);
>>> +
>>> + /* Enable color transform for YTR */
>>> + if (fb->modifier & AFBC_FORMAT_MOD_YTR)
>>> + afbc_format |= (1 << 4);
>>> +
>>> + afbc_tile_num = ALIGN(actual_w, 16) >> 4;
>>> +
>>> + /*
>>> + * AFBC pic_vir_width is count by pixel, this is different
>>> + * with WIN_VIR_STRIDE.
>>> + */
>>> + stride = (fb->pitches[0] << 3) / bpp;
>>> + if ((stride & 0x3f) && (xmirror || rotate_90 || rotate_270))
>>> + drm_err(vop2->drm, "vp%d %s stride[%d] must align as 64 pixel when enable xmirror/rotate_90/rotate_270[0x%x]\n",
>>> + vp->id, win->data->name, stride, pstate->rotation);
>>> +
>>> + rb_swap = vop2_afbc_rb_swap(fb->format->format);
>>> + uv_swap = vop2_afbc_uv_swap(fb->format->format);
>>> + /*
>>> + * This is a workaround for crazy IC design, Cluster
>>> + * and Esmart/Smart use different format configuration map:
>>> + * YUV420_10BIT: 0x10 for Cluster, 0x14 for Esmart/Smart.
>>> + *
>>> + * This is one thing we can make the convert simple:
>>> + * AFBCD decode all the YUV data to YUV444. So we just
>>> + * set all the yuv 10 bit to YUV444_10.
>>> + */
>>> + if (fb->format->is_yuv && (bpp == 10))
>>> + format = VOP2_CLUSTER_YUV444_10;
>>> +
>>> + if (vop2_cluster_window(win))
>>> + vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_RB_SWAP, rb_swap);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
>>> + if (pstate->rotation & (DRM_MODE_ROTATE_270 | DRM_MODE_ROTATE_90)) {
>>> + vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 0);
>>> + transform_offset = vop2_afbc_transform_offset(pstate, false);
>>> + } else {
>>> + vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 1);
>>> + transform_offset = vop2_afbc_transform_offset(pstate, true);
>>> + }
>>> + vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_PIC_SIZE, act_info);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_TRANSFORM_OFFSET, transform_offset);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_PIC_OFFSET, ((src->x1 >> 16) | src->y1));
>>> + vop2_win_write(win, VOP2_WIN_AFBC_DSP_OFFSET, (dest->x1 | (dest->y1 << 16)));
>>> + vop2_win_write(win, VOP2_WIN_AFBC_PIC_VIR_WIDTH, stride);
>>> + vop2_win_write(win, VOP2_WIN_AFBC_TILE_NUM, afbc_tile_num);
>>> + vop2_win_write(win, VOP2_WIN_XMIRROR, xmirror);
>>
>> The xmirror's variable type is specified as bool, but it's not
>> true/false because in the above code:
>>
>> bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X;
>>
>> I don't see how vop2_win_write() could work properly. Or am I missing
>> something?
>
> Everything != 0 is true, so 0x10 & 0x10 is still true.
Ah, my bad. I keep forgetting that kernel uses _Bool.
> But ok,
>
> bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X ? true : false;
>
> looks cleaner. I'll change that.
>
> Thanks for the review so far. Could you drop me a short note when you're
> done? I was about to send v6.
I don't have any more comments, please feel free to send v6.
More information about the linux-arm-kernel
mailing list