[PATCH v5 22/23] drm: rockchip: Add VOP2 driver

[Dmitry Osipenko]

09.02.2022 12:53, Sascha Hauer пишет:
> +static void vop2_plane_atomic_update(struct drm_plane *plane, struct drm_atomic_state *state)
> +{
> +	struct drm_plane_state *pstate = plane->state;
> +	struct drm_crtc *crtc = pstate->crtc;
> +	struct vop2_win *win = to_vop2_win(plane);
> +	struct vop2_video_port *vp = to_vop2_video_port(crtc);
> +	struct drm_display_mode *adjusted_mode = &crtc->state->adjusted_mode;
> +	struct vop2 *vop2 = win->vop2;
> +	struct drm_framebuffer *fb = pstate->fb;
> +	uint32_t bpp = fb->format->cpp[0] * 8;
> +	uint32_t actual_w, actual_h, dsp_w, dsp_h;
> +	uint32_t act_info, dsp_info;
> +	uint32_t format;
> +	uint32_t afbc_format;
> +	uint32_t rb_swap;
> +	uint32_t uv_swap;
> +	struct drm_rect *src = &pstate->src;
> +	struct drm_rect *dest = &pstate->dst;
> +	uint32_t afbc_tile_num;
> +	uint32_t transform_offset;
> +	bool dither_up;
> +	bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X;
> +	bool ymirror = pstate->rotation & DRM_MODE_REFLECT_Y;
> +	bool rotate_270 = pstate->rotation & DRM_MODE_ROTATE_270;
> +	bool rotate_90 = pstate->rotation & DRM_MODE_ROTATE_90;
> +	struct rockchip_gem_object *rk_obj;
> +	unsigned long offset;
> +	bool afbc_en;
> +	dma_addr_t yrgb_mst;
> +	dma_addr_t uv_mst;
> +
> +	/*
> +	 * can't update plane when vop2 is disabled.
> +	 */
> +	if (WARN_ON(!crtc))
> +		return;
> +
> +	if (!pstate->visible) {
> +		vop2_plane_atomic_disable(plane, state);
> +		return;
> +	}
> +
> +	afbc_en = rockchip_afbc(plane, fb->modifier);
> +
> +	offset = (src->x1 >> 16) * fb->format->cpp[0];
> +
> +	/*
> +	 * AFBC HDR_PTR must set to the zero offset of the framebuffer.
> +	 */
> +	if (afbc_en)
> +		offset = 0;
> +	else if (pstate->rotation & DRM_MODE_REFLECT_Y)
> +		offset += ((src->y2 >> 16) - 1) * fb->pitches[0];
> +	else
> +		offset += (src->y1 >> 16) * fb->pitches[0];
> +
> +	rk_obj = to_rockchip_obj(fb->obj[0]);
> +
> +	yrgb_mst = rk_obj->dma_addr + offset + fb->offsets[0];
> +	if (fb->format->is_yuv) {
> +		int hsub = fb->format->hsub;
> +		int vsub = fb->format->vsub;
> +
> +		offset = (src->x1 >> 16) * fb->format->cpp[1] / hsub;
> +		offset += (src->y1 >> 16) * fb->pitches[1] / vsub;
> +
> +		if ((pstate->rotation & DRM_MODE_REFLECT_Y) && !afbc_en)
> +			offset += fb->pitches[1] * ((pstate->src_h >> 16) - 2)  / vsub;
> +
> +		rk_obj = to_rockchip_obj(fb->obj[0]);
> +		uv_mst = rk_obj->dma_addr + offset + fb->offsets[1];
> +	}
> +
> +	actual_w = drm_rect_width(src) >> 16;
> +	actual_h = drm_rect_height(src) >> 16;
> +	dsp_w = drm_rect_width(dest);
> +
> +	if (dest->x1 + dsp_w > adjusted_mode->hdisplay) {
> +		drm_err(vop2->drm, "vp%d %s dest->x1[%d] + dsp_w[%d] exceed mode hdisplay[%d]\n",
> +			  vp->id, win->data->name, dest->x1, dsp_w, adjusted_mode->hdisplay);
> +		dsp_w = adjusted_mode->hdisplay - dest->x1;
> +		if (dsp_w < 4)
> +			dsp_w = 4;
> +		actual_w = dsp_w * actual_w / drm_rect_width(dest);
> +	}
> +
> +	dsp_h = drm_rect_height(dest);
> +
> +	if (dest->y1 + dsp_h > adjusted_mode->vdisplay) {
> +		drm_err(vop2->drm, "vp%d %s dest->y1[%d] + dsp_h[%d] exceed mode vdisplay[%d]\n",
> +			  vp->id, win->data->name, dest->y1, dsp_h, adjusted_mode->vdisplay);
> +		dsp_h = adjusted_mode->vdisplay - dest->y1;
> +		if (dsp_h < 4)
> +			dsp_h = 4;
> +		actual_h = dsp_h * actual_h / drm_rect_height(dest);
> +	}
> +
> +	/*
> +	 * This is workaround solution for IC design:
> +	 * esmart can't support scale down when actual_w % 16 == 1.
> +	 */
> +	if (!(win->data->feature & WIN_FEATURE_AFBDC)) {
> +		if (actual_w > dsp_w && (actual_w & 0xf) == 1) {
> +			drm_err(vop2->drm, "vp%d %s act_w[%d] MODE 16 == 1\n", vp->id, win->data->name, actual_w);
> +			actual_w -= 1;
> +		}
> +	}
> +
> +	if (afbc_en && actual_w % 4) {
> +		drm_err(vop2->drm, "vp%d %s actual_w[%d] should align as 4 pixel when enable afbc\n",
> +			  vp->id, win->data->name, actual_w);
> +		actual_w = ALIGN_DOWN(actual_w, 4);
> +	}
> +
> +	act_info = (actual_h - 1) << 16 | ((actual_w - 1) & 0xffff);
> +	dsp_info = (dsp_h - 1) << 16 | ((dsp_w - 1) & 0xffff);
> +
> +	format = vop2_convert_format(fb->format->format);
> +
> +	drm_dbg(vop2->drm, "vp%d update %s[%dx%d->%dx%d@%dx%d] fmt[%p4cc_%s] addr[%pad]\n",
> +		      vp->id, win->data->name, actual_w, actual_h, dsp_w, dsp_h,
> +		      dest->x1, dest->y1,
> +		      &fb->format->format,
> +		      afbc_en ? "AFBC" : "", &yrgb_mst);
> +
> +	if (afbc_en) {
> +		uint32_t stride;
> +
> +		/* the afbc superblock is 16 x 16 */
> +		afbc_format = vop2_convert_afbc_format(fb->format->format);
> +
> +		/* Enable color transform for YTR */
> +		if (fb->modifier & AFBC_FORMAT_MOD_YTR)
> +			afbc_format |= (1 << 4);
> +
> +		afbc_tile_num = ALIGN(actual_w, 16) >> 4;
> +
> +		/*
> +		 * AFBC pic_vir_width is count by pixel, this is different
> +		 * with WIN_VIR_STRIDE.
> +		 */
> +		stride = (fb->pitches[0] << 3) / bpp;
> +		if ((stride & 0x3f) && (xmirror || rotate_90 || rotate_270))
> +			drm_err(vop2->drm, "vp%d %s stride[%d] must align as 64 pixel when enable xmirror/rotate_90/rotate_270[0x%x]\n",
> +				  vp->id, win->data->name, stride, pstate->rotation);
> +
> +		rb_swap = vop2_afbc_rb_swap(fb->format->format);
> +		uv_swap = vop2_afbc_uv_swap(fb->format->format);
> +		/*
> +		 * This is a workaround for crazy IC design, Cluster
> +		 * and Esmart/Smart use different format configuration map:
> +		 * YUV420_10BIT: 0x10 for Cluster, 0x14 for Esmart/Smart.
> +		 *
> +		 * This is one thing we can make the convert simple:
> +		 * AFBCD decode all the YUV data to YUV444. So we just
> +		 * set all the yuv 10 bit to YUV444_10.
> +		 */
> +		if (fb->format->is_yuv && (bpp == 10))
> +			format = VOP2_CLUSTER_YUV444_10;
> +
> +		if (vop2_cluster_window(win))
> +			vop2_win_write(win, VOP2_WIN_AFBC_ENABLE, 1);
> +		vop2_win_write(win, VOP2_WIN_AFBC_FORMAT, afbc_format);
> +		vop2_win_write(win, VOP2_WIN_AFBC_RB_SWAP, rb_swap);
> +		vop2_win_write(win, VOP2_WIN_AFBC_UV_SWAP, uv_swap);
> +		vop2_win_write(win, VOP2_WIN_AFBC_AUTO_GATING_EN, 0);
> +		vop2_win_write(win, VOP2_WIN_AFBC_BLOCK_SPLIT_EN, 0);
> +		if (pstate->rotation & (DRM_MODE_ROTATE_270 | DRM_MODE_ROTATE_90)) {
> +			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 0);
> +			transform_offset = vop2_afbc_transform_offset(pstate, false);
> +		} else {
> +			vop2_win_write(win, VOP2_WIN_AFBC_HALF_BLOCK_EN, 1);
> +			transform_offset = vop2_afbc_transform_offset(pstate, true);
> +		}
> +		vop2_win_write(win, VOP2_WIN_AFBC_HDR_PTR, yrgb_mst);
> +		vop2_win_write(win, VOP2_WIN_AFBC_PIC_SIZE, act_info);
> +		vop2_win_write(win, VOP2_WIN_AFBC_TRANSFORM_OFFSET, transform_offset);
> +		vop2_win_write(win, VOP2_WIN_AFBC_PIC_OFFSET, ((src->x1 >> 16) | src->y1));
> +		vop2_win_write(win, VOP2_WIN_AFBC_DSP_OFFSET, (dest->x1 | (dest->y1 << 16)));
> +		vop2_win_write(win, VOP2_WIN_AFBC_PIC_VIR_WIDTH, stride);
> +		vop2_win_write(win, VOP2_WIN_AFBC_TILE_NUM, afbc_tile_num);
> +		vop2_win_write(win, VOP2_WIN_XMIRROR, xmirror);

The xmirror's variable type is specified as bool, but it's not
true/false because in the above code:

bool xmirror = pstate->rotation & DRM_MODE_REFLECT_X;

I don't see how vop2_win_write() could work properly. Or am I missing
something?