[PATCH v2 2/2] ARM: dts: kirkwood: Add Ctera C-200 V1 board

[Andrew Lunn]

On Tue, Feb 15, 2022 at 05:39:22PM +0100, Pawel Dembicki wrote:
> Ctera C200 V1 is kirkwood-based 2-Bay NAS.
> 
> Hardware:
>   - SoC: Marvell 88F6281-A1 ARMv5TE Processor 1.2GHz
>   - Ram: 512MB (4x Nanya NT5TU128M8GE-AC)
>   - NAND Flash: 256MB (Samsung 216 K9F2G08U0C)
>   - Lan: 1x GBE (Marvell 88E1116R-NNC1)
>   - Storage: 2x SATA HDD 3.5" Slot
>   - USB: 2x USB 2.0 port
>   - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND)
>   - LEDs: 13x GPIO controlled
>   - Buttons: 2x GPIO controlled
> 
> Signed-off-by: Pawel Dembicki <paweldembicki at gmail.com>

Reviewed-by: Andrew Lunn <andrew at lunn.ch>

    Andrew