[PATCH] net: ethernet: xilinx: cleanup comments

[Radhey Shyam Pandey]

> -----Original Message-----
> From: trix at redhat.com <trix at redhat.com>
> Sent: Wednesday, February 16, 2022 12:35 AM
> To: davem at davemloft.net; kuba at kernel.org; Michal Simek
> <michals at xilinx.com>; Radhey Shyam Pandey <radheys at xilinx.com>;
> gary at garyguo.net; rdunlap at infradead.org; esben at geanix.com;
> huangguangbin2 at huawei.com; michael at walle.cc; moyufeng at huawei.com;
> arnd at arndb.de; chenhao288 at hisilicon.com; andrew at lunn.ch;
> prabhakar.mahadev-lad.rj at bp.renesas.com; yuehaibing at huawei.com
> Cc: netdev at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-
> kernel at vger.kernel.org; Tom Rix <trix at redhat.com>
> Subject: [PATCH] net: ethernet: xilinx: cleanup comments
> 
> From: Tom Rix <trix at redhat.com>
> 
> Remove the second 'the'.
> Replacements:
> endiannes to endianness
> areconnected to are connected
> Mamagement to Management
> undoccumented to undocumented
> Xilink to Xilinx
> strucutre to structure
> 
> Signed-off-by: Tom Rix <trix at redhat.com>

Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey at xilinx.com>
Thanks!

> ---
>  drivers/net/ethernet/xilinx/Kconfig               | 2 +-
>  drivers/net/ethernet/xilinx/ll_temac.h            | 4 ++--
>  drivers/net/ethernet/xilinx/ll_temac_main.c       | 2 +-
>  drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
>  drivers/net/ethernet/xilinx/xilinx_emaclite.c     | 2 +-
>  5 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ethernet/xilinx/Kconfig
> b/drivers/net/ethernet/xilinx/Kconfig
> index 911b5ef9e680..0014729b8865 100644
> --- a/drivers/net/ethernet/xilinx/Kconfig
> +++ b/drivers/net/ethernet/xilinx/Kconfig
> @@ -1,6 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0-only  # -# Xilink device configuration
> +# Xilinx device configuration
>  #
> 
>  config NET_VENDOR_XILINX
> diff --git a/drivers/net/ethernet/xilinx/ll_temac.h
> b/drivers/net/ethernet/xilinx/ll_temac.h
> index 4a73127e10a6..ad8d29f84be6 100644
> --- a/drivers/net/ethernet/xilinx/ll_temac.h
> +++ b/drivers/net/ethernet/xilinx/ll_temac.h
> @@ -271,7 +271,7 @@ This option defaults to enabled (set) */
> 
>  #define XTE_TIE_OFFSET			0x000003A4 /* Interrupt
> enable */
> 
> -/**  MII Mamagement Control register (MGTCR) */
> +/**  MII Management Control register (MGTCR) */
>  #define XTE_MGTDR_OFFSET		0x000003B0 /* MII data */
>  #define XTE_MIIMAI_OFFSET		0x000003B4 /* MII control */
> 
> @@ -283,7 +283,7 @@ This option defaults to enabled (set) */
> 
>  #define STS_CTRL_APP0_ERR         (1 << 31)
>  #define STS_CTRL_APP0_IRQONEND    (1 << 30)
> -/* undoccumented */
> +/* undocumented */
>  #define STS_CTRL_APP0_STOPONEND   (1 << 29)
>  #define STS_CTRL_APP0_CMPLT       (1 << 28)
>  #define STS_CTRL_APP0_SOP         (1 << 27)
> diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c
> b/drivers/net/ethernet/xilinx/ll_temac_main.c
> index b900ab5aef2a..7171b5cdec26 100644
> --- a/drivers/net/ethernet/xilinx/ll_temac_main.c
> +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
> @@ -1008,7 +1008,7 @@ static void ll_temac_recv(struct net_device *ndev)
>  		    (skb->len > 64)) {
> 
>  			/* Convert from device endianness (be32) to cpu
> -			 * endiannes, and if necessary swap the bytes
> +			 * endianness, and if necessary swap the bytes
>  			 * (back) for proper IP checksum byte order
>  			 * (be16).
>  			 */
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index de0a6372ae0e..6eeaab77fbe0 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -537,7 +537,7 @@ static int __axienet_device_reset(struct axienet_local
> *lp)
>   * This function is called to reset and initialize the Axi Ethernet core. This
>   * is typically called during initialization. It does a reset of the Axi DMA
>   * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines
> - * areconnected to Axi Ethernet reset lines, this in turn resets the Axi
> + * are connected to Axi Ethernet reset lines, this in turn resets the
> + Axi
>   * Ethernet core. No separate hardware reset is done for the Axi Ethernet
>   * core.
>   * Returns 0 on success or a negative error number otherwise.
> diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> index 519599480b15..f65a638b7239 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> @@ -498,7 +498,7 @@ static void xemaclite_update_address(struct net_local
> *drvdata,
>   * @dev:	Pointer to the network device instance
>   * @address:	Void pointer to the sockaddr structure
>   *
> - * This function copies the HW address from the sockaddr strucutre to the
> + * This function copies the HW address from the sockaddr structure to
> + the
>   * net_device structure and updates the address in HW.
>   *
>   * Return:	Error if the net device is busy or 0 if the addr is set
> --
> 2.26.3