[PATCH 03/10] spi: spi-mem: Add driver for Aspeed SMC controllers

Cédric Le Goater clg at kaod.org
Tue Feb 15 01:07:51 PST 2022


Hello Lukas,

On 2/15/22 07:27, Lukas Wunner wrote:
> On Mon, Feb 14, 2022 at 10:42:24AM +0100, Cédric Le Goater wrote:
>> +static int aspeed_spi_probe(struct platform_device *pdev)
>> +{
> [...]
>> +	ctlr = spi_alloc_master(dev, sizeof(*aspi));
>> +	if (!ctlr)
>> +		return -ENOMEM;
> 
> Use devm_spi_alloc_master() and remove the "put_controller" error path
> for simplicity.
  
yes.

>> +	ret = devm_spi_register_controller(dev, ctlr);
> [...]
>> +static int aspeed_spi_remove(struct platform_device *pdev)
>> +{
>> +	struct spi_controller *ctlr = platform_get_drvdata(pdev);
>> +	struct aspeed_spi *aspi = spi_controller_get_devdata(ctlr);
>> +
>> +	aspeed_spi_enable(aspi, false);
>> +	spi_unregister_controller(ctlr);
>> +	clk_disable_unprepare(aspi->clk);
>> +	return 0;
>> +}
> 
> You need to move the call to spi_unregister_controller() *before*
> the call to aspeed_spi_enable().  The controller must be fully
> operational until spi_unregister_controller() returns.
> 
> You also need to replace the call to devm_spi_register_controller()
> in aspeed_spi_probe() with spi_register_controller().
> Otherwise you'll unregister the controller twice because you're
> calling spi_unregister_controller() in aspeed_spi_remove().

ok. Understood. Done in v2.

Thanks,

C.




More information about the linux-arm-kernel mailing list