[PATCH] mfd: stmfx: Improve error message triggered by regulator fault in .remove()

Uwe Kleine-König u.kleine-koenig at pengutronix.de
Mon Feb 14 06:06:39 PST 2022


On Mon, Feb 14, 2022 at 01:46:37PM +0000, Lee Jones wrote:
> On Mon, 07 Feb 2022, Uwe Kleine-König wrote:
> 
> > Returning a non-zero value in an i2c remove callback results in the i2c
> > core emitting a very generic error message ("remove failed (-ESOMETHING),
> > will be ignored") and as the message indicates not further error handling
> > is done.
> > 
> > Instead emit a more specific error message and then return zero in
> > .remove().
> > 
> > The long-term goal is to make the i2c remove prototype return void, making
> > all implementations return 0 is preparatory work for this change.
> > 
> > Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> > ---
> >  drivers/mfd/stmfx.c | 16 +++++++++++-----
> >  1 file changed, 11 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/mfd/stmfx.c b/drivers/mfd/stmfx.c
> > index e095a3930142..16631c675f2f 100644
> > --- a/drivers/mfd/stmfx.c
> > +++ b/drivers/mfd/stmfx.c
> > @@ -392,17 +392,21 @@ static int stmfx_chip_init(struct i2c_client *client)
> >  	return ret;
> >  }
> >  
> > -static int stmfx_chip_exit(struct i2c_client *client)
> > +static void stmfx_chip_exit(struct i2c_client *client)
> >  {
> >  	struct stmfx *stmfx = i2c_get_clientdata(client);
> >  
> >  	regmap_write(stmfx->map, STMFX_REG_IRQ_SRC_EN, 0);
> >  	regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0);
> >  
> > -	if (stmfx->vdd)
> > -		return regulator_disable(stmfx->vdd);
> > +	if (stmfx->vdd) {
> > +		int ret = regulator_disable(stmfx->vdd);
> >  
> > -	return 0;
> > +		if (ret)
> 
> Nit: Premise of the patch is fine, but please can you use the standard
> function call, check the return value format please.  Something about
> this is triggering my OCD! :)
> 
>      	int ret;
> 
> 	ret = regulator_disable(stmfx->vdd);
> 	if (ret)
> 		do_thing();

Not sure I understand you correctly. Do you want just:

 	regmap_write(stmfx->map, STMFX_REG_SYS_CTRL, 0);
 
 	if (stmfx->vdd) {
-		int ret = regulator_disable(stmfx->vdd);
+		int ret;
+
+		ret = regulator_disable(stmfx->vdd);
 		if (ret)
 ...

squashed into the patch?

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20220214/33cb3cc0/attachment-0001.sig>


More information about the linux-arm-kernel mailing list