[PATCH v2 2/2] arm64: dts: imx8mn-bsh-smm-s2pro: Add tlv320aic31xx audio card node

[Shawn Guo]

On Thu, Feb 10, 2022 at 10:40:49AM -0300, Ariel D'Alessandro wrote:
> BSH SystemMaster (SMM) S2 PRO board comes with an audio card based on
> tlv320aic31xx family codec.
> 
> The audio card exposes two playback devices, one of them using the EASRC
> (Enhanced Asynchronous Sample Rate Converter) module. Note that this
> would require SDMA and EASRC firmware in order to work.
> 
> Signed-off-by: Ariel D'Alessandro <ariel.dalessandro at collabora.com>
> Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
> ---
>  .../dts/freescale/imx8mn-bsh-smm-s2pro.dts    | 94 +++++++++++++++++++
>  1 file changed, 94 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> index c6a8ed6745c1..3621354b4a92 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2pro.dts
> @@ -7,6 +7,7 @@
>  /dts-v1/;
>  
>  #include "imx8mn-bsh-smm-s2-common.dtsi"
> +#include <dt-bindings/sound/tlv320aic31xx.h>
>  
>  / {
>  	model = "BSH SMM S2 PRO";
> @@ -16,6 +17,69 @@ memory at 40000000 {
>  		device_type = "memory";
>  		reg = <0x0 0x40000000 0x0 0x20000000>;
>  	};
> +
> +	sound-tlv320aic31xx {
> +		compatible = "fsl,imx-audio-tlv320aic31xx";
> +		model = "tlv320aic31xx-hifi";
> +		audio-cpu = <&sai3>;
> +		audio-codec = <&codec>;
> +		audio-asrc = <&easrc>;
> +		audio-routing =
> +			"Ext Spk", "SPL",
> +			"Ext Spk", "SPR";
> +		mclk-id = <PLL_CLKIN_BCLK>;
> +	};
> +
> +	vdd_input: vdd_input {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vdd_input";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +	};
> +};
> +
> +&easrc {
> +	fsl,asrc-rate  = <48000>;

Double spaces before '='.

> +	fsl,asrc-format = <10>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	codec: tlv320dac3101 at 18 {

tlv320dac3101: audio-codec at 18

> +		#sound-dai-cells = <0>;
> +		compatible = "ti,tlv320dac3101";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_dac_rst>;
> +		reg = <0x18>;
> +
> +		ai31xx-micbias-vg = <MICBIAS_AVDDV>;
> +
> +		HPVDD-supply = <&buck4_reg>;
> +		SPRVDD-supply = <&vdd_input>;
> +		SPLVDD-supply = <&vdd_input>;
> +		AVDD-supply = <&buck4_reg>;
> +		IOVDD-supply = <&buck4_reg>;
> +		DVDD-supply = <&buck5_reg>;
> +		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
> +
> +		clocks = <&clk IMX8MN_CLK_SAI3_ROOT>;
> +		clock-names = "mclk";
> +	};
> +};
> +
> +&sai3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai3>;
> +	assigned-clocks = <&clk IMX8MN_CLK_SAI3>;
> +	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <24576000>;
> +	fsl,sai-mclk-direction-output;
> +	status = "okay";
>  };
>  
>  /* eMMC */
> @@ -30,6 +94,36 @@ &usdhc1 {
>  };
>  
>  &iomuxc {
> +	pinctrl_dac_rst: dac_rst {

Name the node more in the same style as other pinctrl nodes.

Shawn

> +		fsl,pins = <
> +			MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19 /* DAC_RST */
> +		>;
> +	};
> +
> +	pinctrl_espi2: espi2grp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK            0x082
> +			MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI            0x082
> +			MX8MN_IOMUXC_ECSPI2_MISO_ECSPI2_MISO            0x082
> +			MX8MN_IOMUXC_ECSPI2_SS0_ECSPI2_SS0		0x040
> +		>;
> +	};
> +
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_I2C2_SCL_I2C2_SCL			0x400000c3
> +			MX8MN_IOMUXC_I2C2_SDA_I2C2_SDA			0x400000c3
> +		>;
> +	};
> +
> +	pinctrl_sai3: sai3grp {
> +		fsl,pins = <
> +			MX8MN_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0xd6
> +			MX8MN_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0xd6
> +			MX8MN_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0xd6
> +		>;
> +	};
> +
>  	pinctrl_usdhc1: usdhc1grp {
>  		fsl,pins = <
>  			MX8MN_IOMUXC_SD1_CLK_USDHC1_CLK			0x40000090
> -- 
> 2.34.1
>