[PATCH 1/2] dt-bindings: arm: imx: add imx8mm gw7903 support

[Tim Harvey]

The GW7903 is based on the i.MX 8M Mini SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - microSD connector with UHS support
 - LIS2DE12 3-axis accelerometer
 - Gateworks System Controller
 - IMX8M FEC
 - software selectable RS232/RS485/RS422 serial transceiver
 - PMIC
 - 2x off-board bi-directional opto-isolated digital I/O
 - 1x M.2 A-E Key Socket and 1x MiniPCIe socket with USB2.0 and PCIe
 (resistor loading to route PCIe/USB2 between M.2 and MiniPCIe socket)

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 5075fd8c1b42..62fb83edc3d1 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -769,6 +769,7 @@ properties:
               - gw,imx8mm-gw73xx-0x       # i.MX8MM Gateworks Development Kit
               - gw,imx8mm-gw7901          # i.MX8MM Gateworks Board
               - gw,imx8mm-gw7902          # i.MX8MM Gateworks Board
+              - gw,imx8mm-gw7903          # i.MX8MM Gateworks Board
               - kontron,imx8mm-n801x-som  # i.MX8MM Kontron SL (N801X) SOM
               - variscite,var-som-mx8mm   # i.MX8MM Variscite VAR-SOM-MX8MM module
               - prt,prt8mm                # i.MX8MM Protonic PRT8MM Board
-- 
2.17.1