[PATCH v2] dt-bindings: soc: samsung: usi: refer to dtschema for children

[Sam Protsenko]

On Fri, 11 Feb 2022 at 18:47, Krzysztof Kozlowski
<krzysztof.kozlowski at canonical.com> wrote:
>
> Explicitly reference the dtschema for USI children implementing specific
> serial protocol (I2C, SPI, UART).  The SPI schema is not yet accepted,
> so it will be provided later.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
>
> ---
>
> Changes since v1:
> 1. Drop entire paragraph about USI nodes.
> ---

Reviewed-by: Sam Protsenko <semen.protsenko at linaro.org>

>  .../bindings/soc/samsung/exynos-usi.yaml      | 20 +++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
> index 58f2e9d8bb0e..a98ed66d092e 100644
> --- a/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
> +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml
> @@ -17,13 +17,6 @@ description: |
>    child nodes, each representing a serial sub-node device. The mode setting
>    selects which particular function will be used.
>
> -  Refer to next bindings documentation for information on protocol subnodes that
> -  can exist under USI node:
> -
> -  [1] Documentation/devicetree/bindings/serial/samsung_uart.yaml
> -  [2] Documentation/devicetree/bindings/i2c/i2c-exynos5.txt
> -  [3] Documentation/devicetree/bindings/spi/spi-samsung.txt
> -
>  properties:
>    $nodename:
>      pattern: "^usi@[0-9a-f]+$"
> @@ -75,10 +68,17 @@ properties:
>        This property is optional.
>
>  patternProperties:
> -  # All other properties should be child nodes
> -  "^(serial|spi|i2c)@[0-9a-f]+$":
> +  "^i2c@[0-9a-f]+$":
> +    $ref: /schemas/i2c/i2c-exynos5.yaml
> +    description: Child node describing underlying I2C
> +
> +  "^serial@[0-9a-f]+$":
> +    $ref: /schemas/serial/samsung_uart.yaml
> +    description: Child node describing underlying UART/serial
> +
> +  "^spi@[0-9a-f]+$":
>      type: object
> -    description: Child node describing underlying USI serial protocol
> +    description: Child node describing underlying SPI
>
>  required:
>    - compatible
> --
> 2.32.0
>