[PATCH v3 12/12] arm64: dts: freescale: add initial support for verdin imx8m mini

Shawn Guo shawnguo at kernel.org
Fri Feb 11 00:39:20 PST 2022


On Fri, Jan 28, 2022 at 05:01:00PM +0100, Marcel Ziswiler wrote:
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> 
> This patch adds the device tree to support Toradex Verdin iMX8M Mini a
> computer on module which can be used on different carrier boards.
> 
> The module consists of an NXP i.MX 8M Mini family SoC (either i.MX 8M
> Mini Quad or 8M Mini DualLite), a PCA9450A PMIC, a Gigabit Ethernet PHY,
> 1 or 2 GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC, an I2C EEPROM, an
> RX8130 RTC, an optional SPI CAN controller plus an optional Bluetooth/
> Wi-Fi module.
> 
> Anything that is not self-contained on the module is disabled by
> default.
> 
> The device tree for the Dahlia includes the module's device tree and
> enables the supported peripherals of the carrier board.
> 
> The device tree for the Verdin Development Board includes the module's
> device tree as well as the Dahlia one as it is a superset and supports
> almost all peripherals available.
> 
> So far there is no display functionality supported at all but basic
> console UART, PCIe, USB host, eMMC and Ethernet and PCIe functionality
> work fine.
> 
> Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at canonical.com>
> 
> ---
> 
> Changes in v3:
> - Rebase on top of shawnguo's for-next.
> - Drop [PATCH v2 02/11] ("dt-bindings: gpio: fix gpio-hog example") as
>   it already got applied by Bart.
> - Remove the 'pm-ignore-notify' property analogous to commit aafac22d6b23
>   ("arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property").
> - Now with PCIe support finally having landed in -next enable it as well.
> - Add Krzysztof's acked-by tag.
> 
> Changes in v2:
> - Remove bootargs which will be filled in by the bootloader as requested
>   by Krzysztof.
> - Remove the previously #ifdefed-out spi-nor as requested by Krzysztof.
> - Fix capitalisation in cover-letter.
> 
>  arch/arm64/boot/dts/freescale/Makefile        |    4 +
>  .../dts/freescale/imx8mm-verdin-dahlia.dtsi   |  150 ++
>  .../boot/dts/freescale/imx8mm-verdin-dev.dtsi |   67 +
>  .../imx8mm-verdin-nonwifi-dahlia.dts          |   18 +
>  .../freescale/imx8mm-verdin-nonwifi-dev.dts   |   18 +
>  .../dts/freescale/imx8mm-verdin-nonwifi.dtsi  |   75 +
>  .../freescale/imx8mm-verdin-wifi-dahlia.dts   |   18 +
>  .../dts/freescale/imx8mm-verdin-wifi-dev.dts  |   18 +
>  .../dts/freescale/imx8mm-verdin-wifi.dtsi     |   95 ++
>  .../boot/dts/freescale/imx8mm-verdin.dtsi     | 1291 +++++++++++++++++
>  10 files changed, 1754 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 6d8f0a532587..04380f2e44a2 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -63,6 +63,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dahlia.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-wifi-dev.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-beacon-kit.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mn-bsh-smm-s2pro.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
> new file mode 100644
> index 000000000000..455127966e67
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
> @@ -0,0 +1,150 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +/ {
> +	sound_card: sound-card {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,bitclock-master = <&dailink_master>;
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,frame-master = <&dailink_master>;
> +		simple-audio-card,name = "imx8mm-wm8904";
> +		simple-audio-card,routing =
> +			"Headphone Jack", "HPOUTL",
> +			"Headphone Jack", "HPOUTR",
> +			"IN2L", "Line In Jack",
> +			"IN2R", "Line In Jack",
> +			"Headphone Jack", "MICBIAS",
> +			"IN1L", "Headphone Jack";
> +		simple-audio-card,widgets =
> +			"Microphone", "Headphone Jack",
> +			"Headphone", "Headphone Jack",
> +			"Line", "Line In Jack";
> +
> +		dailink_master: simple-audio-card,codec {
> +			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
> +			sound-dai = <&wm8904_1a>;
> +		};
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&sai2>;
> +		};
> +	};
> +};
> +
> +/* Verdin SPI_1 */
> +&ecspi2 {
> +	status = "okay";
> +};
> +
> +/* EEPROM on display adapter boards */
> +&eeprom_display_adapter {
> +	status = "okay";
> +};
> +
> +/* EEPROM on Verdin Development board */
> +&eeprom_carrier_board {
> +	status = "okay";
> +};
> +
> +&fec1 {
> +	status = "okay";
> +};
> +
> +/* Verdin QSPI_1 */
> +&flexspi {
> +	status = "okay";
> +};
> +
> +/* Current measurement into module VCC */
> +&hwmon {
> +	status = "okay";
> +};
> +
> +&hwmon_temp {
> +	vs-supply = <&reg_1p8v>;
> +	status = "okay";
> +};
> +
> +&i2c3 {
> +	status = "okay";
> +};
> +
> +/* Verdin I2C_1 */
> +&i2c4 {
> +	status = "okay";
> +
> +	/* Audio Codec */
> +	wm8904_1a: codec at 1a {

audio-codec for the node name.

> +		compatible = "wlf,wm8904";
> +		AVDD-supply = <&reg_3p3v>;
> +		clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
> +		clock-names = "mclk";
> +		CPVDD-supply = <&reg_3p3v>;
> +		DBVDD-supply = <&reg_3p3v>;
> +		DCVDD-supply = <&reg_3p3v>;
> +		MICVDD-supply = <&reg_3p3v>;
> +		reg = <0x1a>;
> +		#sound-dai-cells = <0>;
> +	};
> +};
> +
> +/* Verdin PCIE_1 */
> +&pcie0 {
> +	status = "okay";
> +};
> +
> +&pcie_phy {
> +	status = "okay";
> +};
> +
> +/* Verdin PWM_3_DSI */
> +&pwm1 {
> +	status = "okay";
> +};
> +
> +/* Verdin PWM_1 */
> +&pwm2 {
> +	status = "okay";
> +};
> +
> +/* Verdin PWM_2 */
> +&pwm3 {
> +	status = "okay";
> +};
> +
> +/* VERDIN I2S_1 */
> +&sai2 {
> +	status = "okay";
> +};
> +
> +/* Verdin UART_3 */
> +&uart1 {
> +	status = "okay";
> +};
> +
> +/* Verdin UART_1 */
> +&uart2 {
> +	status = "okay";
> +};
> +
> +/* Verdin UART_2 */
> +&uart3 {
> +	status = "okay";
> +};
> +
> +/* Verdin USB_1 */
> +&usbotg1 {
> +	status = "okay";
> +};
> +
> +/* Verdin USB_2 */
> +&usbotg2 {
> +	status = "okay";
> +};
> +
> +/* Verdin SD_1 */
> +&usdhc2 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
> new file mode 100644
> index 000000000000..f35d22dc546b
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +#include "imx8mm-verdin-dahlia.dtsi"
> +
> +/ {
> +	sound_card: sound-card {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,bitclock-master = <&dailink_master>;
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,frame-master = <&dailink_master>;
> +		simple-audio-card,name = "imx8mm-nau8822";
> +		simple-audio-card,routing =
> +			"Headphones", "LHP",
> +			"Headphones", "RHP",
> +			"Speaker", "LSPK",
> +			"Speaker", "RSPK",
> +			"Line Out", "AUXOUT1",
> +			"Line Out", "AUXOUT2",
> +			"LAUX", "Line In",
> +			"RAUX", "Line In",
> +			"LMICP", "Mic In",
> +			"RMICP", "Mic In";
> +		simple-audio-card,widgets =
> +			"Headphones", "Headphones",
> +			"Line Out", "Line Out",
> +			"Speaker", "Speaker",
> +			"Microphone", "Mic In",
> +			"Line", "Line In";
> +
> +		dailink_master: simple-audio-card,codec {
> +			clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
> +			sound-dai = <&nau8822_1a>;
> +		};
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&sai2>;
> +		};
> +	};
> +};
> +
> +&gpio_expander_21 {
> +	status = "okay";
> +};
> +
> +/* Verdin I2C_1 */
> +&i2c4 {
> +	/* Audio Codec */
> +	nau8822_1a: codec at 1a {

Ditto

> +		compatible = "nuvoton,nau8822";
> +		reg = <0x1a>;
> +	};
> +};
> +
> +/* Verdin UART_1, connector X50 through RS485 transceiver */
> +&uart2 {
> +	linux,rs485-enabled-at-boot-time;
> +	rs485-rts-active-low;
> +	rs485-rx-during-tx;
> +};
> +
> +/* Limit frequency on dev board due to long traces and bad signal integrity */
> +&usdhc2 {
> +	max-frequency = <100000000>;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
> new file mode 100644
> index 000000000000..d64ff378a152
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dahlia.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-verdin.dtsi"
> +#include "imx8mm-verdin-nonwifi.dtsi"
> +#include "imx8mm-verdin-dahlia.dtsi"
> +
> +/ {
> +	model = "Toradex Verdin iMX8M Mini on Dahlia Board";
> +	compatible = "toradex,verdin-imx8mm-nonwifi-dahlia",
> +		     "toradex,verdin-imx8mm-nonwifi",
> +		     "toradex,verdin-imx8mm",
> +		     "fsl,imx8mm";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
> new file mode 100644
> index 000000000000..6ae71ecac8de
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi-dev.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-verdin.dtsi"
> +#include "imx8mm-verdin-nonwifi.dtsi"
> +#include "imx8mm-verdin-dev.dtsi"
> +
> +/ {
> +	model = "Toradex Verdin iMX8M Mini on Verdin Development Board";
> +	compatible = "toradex,verdin-imx8mm-nonwifi-dev",
> +		     "toradex,verdin-imx8mm-nonwifi",
> +		     "toradex,verdin-imx8mm",
> +		     "fsl,imx8mm";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
> new file mode 100644
> index 000000000000..9aff9dde1a02
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-nonwifi.dtsi
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +&gpio3 {
> +	gpio-line-names = "SODIMM_52",
> +			  "SODIMM_54",
> +			  "SODIMM_64",
> +			  "SODIMM_21",
> +			  "SODIMM_206",
> +			  "SODIMM_76",
> +			  "SODIMM_56",
> +			  "SODIMM_58",
> +			  "SODIMM_60",
> +			  "SODIMM_62",
> +			  "SODIMM_162",
> +			  "SODIMM_164",
> +			  "SODIMM_166",
> +			  "SODIMM_168",
> +			  "SODIMM_66",
> +			  "SODIMM_17",
> +			  "",
> +			  "SODIMM_156",
> +			  "SODIMM_160",
> +			  "SODIMM_244",
> +			  "SODIMM_250",
> +			  "SODIMM_48",
> +			  "SODIMM_44",
> +			  "SODIMM_42",
> +			  "SODIMM_46";
> +};
> +
> +&gpio4 {
> +	gpio-line-names = "SODIMM_102",
> +			  "SODIMM_90",
> +			  "SODIMM_92",
> +			  "SODIMM_94",
> +			  "SODIMM_96",
> +			  "SODIMM_100",
> +			  "SODIMM_148",
> +			  "SODIMM_152",
> +			  "SODIMM_154",
> +			  "SODIMM_174",
> +			  "SODIMM_120",
> +			  "SODIMM_104",
> +			  "SODIMM_106",
> +			  "SODIMM_108",
> +			  "SODIMM_112",
> +			  "SODIMM_114",
> +			  "SODIMM_116",
> +			  "SODIMM_150",
> +			  "SODIMM_118",
> +			  "",
> +			  "SODIMM_88",
> +			  "SODIMM_149",
> +			  "SODIMM_147",
> +			  "SODIMM_36",
> +			  "SODIMM_32",
> +			  "SODIMM_30",
> +			  "SODIMM_34",
> +			  "SODIMM_38",
> +			  "SODIMM_252",
> +			  "SODIMM_133",
> +			  "SODIMM_135",
> +			  "SODIMM_129";
> +};
> +
> +&usdhc3 {
> +	bus-width = <4>;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
> new file mode 100644
> index 000000000000..d424c475cba1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dahlia.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-verdin.dtsi"
> +#include "imx8mm-verdin-wifi.dtsi"
> +#include "imx8mm-verdin-dahlia.dtsi"
> +
> +/ {
> +	model = "Toradex Verdin iMX8M Mini WB on Dahlia Board";
> +	compatible = "toradex,verdin-imx8mm-wifi-dahlia",
> +		     "toradex,verdin-imx8mm-wifi",
> +		     "toradex,verdin-imx8mm",
> +		     "fsl,imx8mm";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
> new file mode 100644
> index 000000000000..ef952021832e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi-dev.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-verdin.dtsi"
> +#include "imx8mm-verdin-wifi.dtsi"
> +#include "imx8mm-verdin-dev.dtsi"
> +
> +/ {
> +	model = "Toradex Verdin iMX8M Mini WB on Verdin Development Board";
> +	compatible = "toradex,verdin-imx8mm-wifi-dev",
> +		     "toradex,verdin-imx8mm-wifi",
> +		     "toradex,verdin-imx8mm",
> +		     "fsl,imx8mm";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
> new file mode 100644
> index 000000000000..c400770c1df5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin-wifi.dtsi
> @@ -0,0 +1,95 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +/ {
> +	reg_wifi_en: regulator-wifi-en {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_wifi_pwr_en>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-name = "PDn_AW-CM276NF";
> +		startup-delay-us = <2000>;
> +	};
> +};
> +
> +/* On-module Wi-Fi */
> +&usdhc3 {
> +	bus-width = <4>;
> +	keep-power-in-suspend;
> +	non-removable;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_wifi_ctrl>;
> +	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_wifi_ctrl>;
> +	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_wifi_ctrl>;
> +	vmmc-supply = <&reg_wifi_en>;
> +	wifi-host;
> +	status = "okay";
> +};
> +
> +&gpio3 {
> +	gpio-line-names = "SODIMM_52",
> +			  "SODIMM_54",
> +			  "SODIMM_64",
> +			  "SODIMM_21",
> +			  "SODIMM_206",
> +			  "SODIMM_76",
> +			  "SODIMM_56",
> +			  "SODIMM_58",
> +			  "SODIMM_60",
> +			  "SODIMM_62",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "SODIMM_66",
> +			  "SODIMM_17",
> +			  "",
> +			  "",
> +			  "",
> +			  "SODIMM_244",
> +			  "SODIMM_250",
> +			  "SODIMM_48",
> +			  "SODIMM_44",
> +			  "SODIMM_42",
> +			  "SODIMM_46";
> +};
> +
> +&gpio4 {
> +	gpio-line-names = "SODIMM_102",
> +			  "SODIMM_90",
> +			  "SODIMM_92",
> +			  "SODIMM_94",
> +			  "SODIMM_96",
> +			  "SODIMM_100",
> +			  "",
> +			  "",
> +			  "",
> +			  "SODIMM_174",
> +			  "SODIMM_120",
> +			  "SODIMM_104",
> +			  "SODIMM_106",
> +			  "SODIMM_108",
> +			  "SODIMM_112",
> +			  "SODIMM_114",
> +			  "SODIMM_116",
> +			  "",
> +			  "SODIMM_118",
> +			  "",
> +			  "SODIMM_88",
> +			  "SODIMM_149",
> +			  "SODIMM_147",
> +			  "SODIMM_36",
> +			  "SODIMM_32",
> +			  "SODIMM_30",
> +			  "SODIMM_34",
> +			  "SODIMM_38",
> +			  "SODIMM_252",
> +			  "SODIMM_133",
> +			  "SODIMM_135",
> +			  "SODIMM_129";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> new file mode 100644
> index 000000000000..00df2a0f1014
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
> @@ -0,0 +1,1291 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> +/*
> + * Copyright 2022 Toradex
> + */
> +
> +#include "dt-bindings/phy/phy-imx8-pcie.h"
> +#include "dt-bindings/pwm/pwm.h"
> +#include "imx8mm.dtsi"
> +
> +/ {
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	aliases {
> +		rtc0 = &rtc_i2c;
> +		rtc1 = &snvs_rtc;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		brightness-levels = <0 45 63 88 119 158 203 255>;
> +		default-brightness-level = <4>;
> +		/* Verdin I2S_2_D_OUT (DSI_1_BKL_EN/DSI_1_BKL_EN_LVDS, SODIMM 46) */
> +		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_i2s_2_d_out_dsi_1_bkl_en>;
> +		power-supply = <&reg_3p3v>;
> +		/* Verdin PWM_3_DSI/PWM_3_DSI_LVDS (SODIMM 19) */
> +		pwms = <&pwm1 0 6666667 PWM_POLARITY_INVERTED>;
> +		status = "disabled";
> +	};
> +
> +	/* Fixed clock dedicated to SPI CAN controller */
> +	clk20m: oscillator {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <20000000>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_keys>;
> +
> +		wakeup {
> +			debounce-interval = <10>;
> +			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
> +			gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
> +			label = "Wake-Up";
> +			linux,code = <KEY_WAKEUP>;
> +			wakeup-source;
> +		};
> +	};
> +
> +	/* Carrier Board Supplies */
> +	reg_1p8v: regulator-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-max-microvolt = <1800000>;
> +		regulator-min-microvolt = <1800000>;
> +		regulator-name = "+V1.8_SW";
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-max-microvolt = <3300000>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-name = "+V3.3_SW";
> +	};
> +
> +	reg_5p0v: regulator-5p0v {
> +		compatible = "regulator-fixed";
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-name = "+V5_SW";
> +	};
> +
> +	/* Non PMIC On-module Supplies */
> +	reg_ethphy: regulator-ethphy {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
> +		off-on-delay = <500000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_eth>;
> +		regulator-boot-on;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-name = "+V3.3_ETH";
> +		startup-delay-us = <200000>;
> +	};
> +
> +	reg_usb_otg1_vbus: regulator-usb-otg1 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		/* Verdin USB_1_EN (SODIMM 155) */
> +		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usb1_en>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-name = "usb_otg1_vbus";
> +	};
> +
> +	reg_usb_otg2_vbus: regulator-usb-otg2 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		/* Verdin USB_2_EN (SODIMM 185) */
> +		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usb2_en>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-name = "usb_otg2_vbus";
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		/* Verdin SD_1_PWR_EN (SODIMM 76) */
> +		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
> +		off-on-delay = <100000>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-name = "+V3.3_SD";
> +		startup-delay-us = <2000>;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		/* Use the kernel configuration settings instead */
> +		/delete-node/ linux,cma;
> +
> +		rpmsg_reserved: rpmsg at b8000000 {
> +			no-map;
> +			reg = <0 0xb8000000 0 0x400000>;
> +		};

Not sure this is a board level configuration.

> +	};
> +};
> +
> +&A53_0 {
> +	cpu-supply = <&reg_vdd_arm>;
> +};
> +
> +&A53_1 {
> +	cpu-supply = <&reg_vdd_arm>;
> +};
> +
> +&A53_2 {
> +	cpu-supply = <&reg_vdd_arm>;
> +};
> +
> +&A53_3 {
> +	cpu-supply = <&reg_vdd_arm>;
> +};
> +
> +&ddrc {
> +	operating-points-v2 = <&ddrc_opp_table>;
> +
> +	ddrc_opp_table: opp-table {
> +		compatible = "operating-points-v2";
> +
> +		opp-25M {
> +			opp-hz = /bits/ 64 <25000000>;
> +		};
> +
> +		opp-100M {
> +			opp-hz = /bits/ 64 <100000000>;
> +		};
> +
> +		opp-750M {
> +			opp-hz = /bits/ 64 <750000000>;
> +		};
> +	};
> +};
> +
> +/* Verdin SPI_1 */
> +&ecspi2 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi2>;
> +};
> +
> +/* Verdin CAN_1 and CAN_2 (On-module) */
> +&ecspi3 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>,
> +		   <&gpio1 5 GPIO_ACTIVE_LOW>;
> +	spi-num-chipselects = <2>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi3>;
> +	status = "okay";
> +
> +	can1: can at 0 {
> +		compatible = "microchip,mcp251xfd";
> +		clocks = <&clk20m>;
> +		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_FALLING>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_can1_int>;
> +		reg = <0>;
> +		spi-max-frequency = <8500000>;
> +	};
> +
> +	can2: can at 1 {
> +		compatible = "microchip,mcp251xfd";
> +		clocks = <&clk20m>;
> +		interrupts-extended = <&gpio1 7 IRQ_TYPE_EDGE_FALLING>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_can2_int>;
> +		reg = <1>;
> +		spi-max-frequency = <8500000>;
> +		/* Not assembled on regular SKUs */
> +		status = "disabled";
> +	};
> +};
> +
> +/* Verdin ETH_1 (On-module PHY) */
> +&fec1 {
> +	fsl,magic-packet;
> +	phy-handle = <&ethphy0>;
> +	phy-mode = "rgmii-id";
> +	phy-supply = <&reg_ethphy>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&pinctrl_fec1>;
> +	pinctrl-1 = <&pinctrl_fec1_sleep>;
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		ethphy0: ethernet-phy at 7 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
> +			interrupt-parent = <&gpio1>;
> +			interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
> +			micrel,led-mode = <0>;
> +			reg = <7>;
> +		};
> +	};
> +};
> +
> +/* Verdin QSPI_1 */
> +&flexspi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexspi0>;
> +};
> +
> +&gpio1 {
> +	gpio-line-names = "SODIMM_216",
> +			  "SODIMM_19",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "SODIMM_220",
> +			  "SODIMM_222",
> +			  "",
> +			  "SODIMM_218",
> +			  "SODIMM_155",
> +			  "SODIMM_157",
> +			  "SODIMM_185",
> +			  "SODIMM_187";
> +};
> +
> +&gpio2 {
> +	gpio-line-names = "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "SODIMM_84",
> +			  "SODIMM_78",
> +			  "SODIMM_74",
> +			  "SODIMM_80",
> +			  "SODIMM_82",
> +			  "SODIMM_70",
> +			  "SODIMM_72";
> +};
> +
> +&gpio5 {
> +	gpio-line-names = "SODIMM_131",
> +			  "",
> +			  "SODIMM_91",
> +			  "SODIMM_16",
> +			  "SODIMM_15",
> +			  "SODIMM_208",
> +			  "SODIMM_137",
> +			  "SODIMM_139",
> +			  "SODIMM_141",
> +			  "SODIMM_143",
> +			  "SODIMM_196",
> +			  "SODIMM_200",
> +			  "SODIMM_198",
> +			  "SODIMM_202",
> +			  "",
> +			  "",
> +			  "SODIMM_55",
> +			  "SODIMM_53",
> +			  "SODIMM_95",
> +			  "SODIMM_93",
> +			  "SODIMM_14",
> +			  "SODIMM_12",
> +			  "",
> +			  "",
> +			  "",
> +			  "",
> +			  "SODIMM_210",
> +			  "SODIMM_212",
> +			  "SODIMM_151",
> +			  "SODIMM_153";
> +
> +	ctrl_sleep_moci-hog {
> +		gpio-hog;
> +		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
> +		gpios = <1 GPIO_ACTIVE_HIGH>;
> +		line-name = "CTRL_SLEEP_MOCI#";
> +		output-high;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
> +	};
> +};
> +
> +/* On-module I2C */
> +&i2c1 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	pinctrl-1 = <&pinctrl_i2c1_gpio>;
> +	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	status = "okay";
> +
> +	pca9450: pmic at 25 {
> +		compatible = "nxp,pca9450a";
> +		interrupt-parent = <&gpio1>;
> +		/* PMIC PCA9450 PMIC_nINT GPIO1_IO3 */
> +		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_pmic>;
> +		reg = <0x25>;
> +		sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
> +
> +		regulators {
> +			reg_vdd_soc: BUCK1 {
> +				nxp,dvs-run-voltage = <850000>;
> +				nxp,dvs-standby-voltage = <800000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <850000>;
> +				regulator-min-microvolt = <800000>;
> +				regulator-name = "+VDD_SOC";
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			reg_vdd_arm: BUCK2 {
> +				nxp,dvs-run-voltage = <950000>;
> +				nxp,dvs-standby-voltage = <850000>;
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <950000>;
> +				regulator-min-microvolt = <850000>;
> +				regulator-name = "+VDD_ARM";
> +				regulator-ramp-delay = <3125>;
> +			};
> +
> +			reg_vdd_dram: BUCK3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <950000>;
> +				regulator-min-microvolt = <850000>;
> +				regulator-name = "+VDD_GPU_VPU_DDR";
> +			};
> +
> +			reg_vdd_3v3: BUCK4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-name = "+V3.3";
> +			};
> +
> +			reg_vdd_1v8: BUCK5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-name = "PWR_1V8_MOCI";
> +			};
> +
> +			reg_nvcc_dram: BUCK6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1100000>;
> +				regulator-min-microvolt = <1100000>;
> +				regulator-name = "+VDD_DDR";
> +			};
> +
> +			reg_nvcc_snvs: LDO1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-name = "+V1.8_SNVS";
> +			};
> +
> +			reg_vdd_snvs: LDO2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <900000>;
> +				regulator-min-microvolt = <800000>;
> +				regulator-name = "+V0.8_SNVS";
> +			};
> +
> +			reg_vdda: LDO3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-name = "+V1.8A";
> +			};
> +
> +			reg_vdd_phy: LDO4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-max-microvolt = <900000>;
> +				regulator-min-microvolt = <900000>;
> +				regulator-name = "+V0.9_MIPI";
> +			};
> +
> +			reg_nvcc_sd: LDO5 {
> +				regulator-max-microvolt = <3300000>;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-name = "+V3.3_1.8_SD";
> +			};
> +		};
> +	};
> +
> +	rtc_i2c: rtc at 32 {
> +		compatible = "epson,rx8130";
> +		reg = <0x32>;
> +	};
> +
> +	adc at 49 {
> +		compatible = "ti,ads1015";
> +		reg = <0x49>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* Verdin I2C_1 (ADC_4 - ADC_3) */
> +		channel at 0 {
> +			reg = <0>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +
> +		/* Verdin I2C_1 (ADC_4 - ADC_1) */
> +		channel at 1 {
> +			reg = <1>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +
> +		/* Verdin I2C_1 (ADC_3 - ADC_1) */
> +		channel at 2 {
> +			reg = <2>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +
> +		/* Verdin I2C_1 (ADC_2 - ADC_1) */
> +		channel at 3 {
> +			reg = <3>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +
> +		/* Verdin I2C_1 ADC_4 */
> +		channel at 4 {
> +			reg = <4>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +
> +		/* Verdin I2C_1 ADC_3 */
> +		channel at 5 {
> +			reg = <5>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +
> +		/* Verdin I2C_1 ADC_2 */
> +		channel at 6 {
> +			reg = <6>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +
> +		/* Verdin I2C_1 ADC_1 */
> +		channel at 7 {
> +			reg = <7>;
> +			ti,datarate = <4>;
> +			ti,gain = <2>;
> +		};
> +	};
> +
> +	eeprom at 50 {
> +		compatible = "st,24c02";
> +		pagesize = <16>;
> +		reg = <0x50>;
> +	};
> +};
> +
> +/* Verdin I2C_2_DSI */
> +&i2c2 {
> +	clock-frequency = <10000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	pinctrl-1 = <&pinctrl_i2c2_gpio>;
> +	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	status = "disabled";
> +};
> +
> +/* Verdin I2C_3_HDMI N/A */
> +
> +/* Verdin I2C_4_CSI */
> +&i2c3 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	pinctrl-1 = <&pinctrl_i2c3_gpio>;
> +	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +};
> +
> +/* Verdin I2C_1 */
> +&i2c4 {
> +	clock-frequency = <400000>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +	pinctrl-1 = <&pinctrl_i2c4_gpio>;
> +	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
> +
> +	gpio_expander_21: gpio-expander at 21 {
> +		compatible = "nxp,pcal6416";
> +		#gpio-cells = <2>;
> +		gpio-controller;
> +		reg = <0x21>;
> +		status = "disabled";

Put 'status' at the end of property list.

Shawn

> +		vcc-supply = <&reg_3p3v>;
> +	};
> +
> +	lvds_ti_sn65dsi83: bridge at 2c {
> +		compatible = "ti,sn65dsi83";
> +		/* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
> +		/* Verdin GPIO_10_DSI (SODIMM 21) */
> +		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_10_dsi>;
> +		reg = <0x2c>;
> +		status = "disabled";
> +	};
> +
> +	/* Current measurement into module VCC */
> +	hwmon: hwmon at 40 {
> +		compatible = "ti,ina219";
> +		reg = <0x40>;
> +		shunt-resistor = <10000>;
> +		status = "disabled";
> +	};
> +
> +	hdmi_lontium_lt8912: hdmi at 48 {
> +		compatible = "lontium,lt8912b";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
> +		reg = <0x48>;
> +		/* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
> +		/* Verdin GPIO_10_DSI (SODIMM 21) */
> +		reset-gpios = <&gpio3 3 GPIO_ACTIVE_LOW>;
> +		status = "disabled";
> +	};
> +
> +	atmel_mxt_ts: touch at 4a {
> +		compatible = "atmel,maxtouch";
> +		/* Verdin GPIO_9_DSI */
> +		/* (TOUCH_INT#, SODIMM 17, also routed to SN65dsi83 IRQ albeit currently unused) */
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_gpio_9_dsi>, <&pinctrl_i2s_2_bclk_touch_reset>;
> +		reg = <0x4a>;
> +		/* Verdin I2S_2_BCLK (TOUCH_RESET#, SODIMM 42) */
> +		reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
> +		status = "disabled";
> +	};
> +
> +	/* Temperature sensor on carrier board */
> +	hwmon_temp: sensor at 4f {
> +		compatible = "ti,tmp75c";
> +		reg = <0x4f>;
> +		status = "disabled";
> +	};
> +
> +	/* EEPROM on display adapter (MIPI DSI Display Adapter) */
> +	eeprom_display_adapter: eeprom at 50 {
> +		compatible = "st,24c02";
> +		pagesize = <16>;
> +		reg = <0x50>;
> +		status = "disabled";
> +	};
> +
> +	/* EEPROM on carrier board */
> +	eeprom_carrier_board: eeprom at 57 {
> +		compatible = "st,24c02";
> +		pagesize = <16>;
> +		reg = <0x57>;
> +		status = "disabled";
> +	};
> +};
> +
> +/* Verdin PCIE_1 */
> +&pcie0 {
> +	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
> +			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
> +	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
> +				 <&clk IMX8MM_SYS_PLL2_250M>;
> +	assigned-clock-rates = <10000000>, <250000000>;
> +	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
> +		 <&clk IMX8MM_CLK_PCIE1_PHY>;
> +	clock-names = "pcie", "pcie_aux", "pcie_bus";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pcie0>;
> +	/* PCIE_1_RESET# (SODIMM 244) */
> +	reset-gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
> +};
> +
> +&pcie_phy {
> +	clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
> +	fsl,clkreq-unsupported;
> +	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
> +	fsl,tx-deemph-gen1 = <0x2d>;
> +	fsl,tx-deemph-gen2 = <0xf>;
> +};
> +
> +/* Verdin PWM_3_DSI */
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm_1>;
> +	#pwm-cells = <3>;
> +};
> +
> +/* Verdin PWM_1 */
> +&pwm2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm_2>;
> +	#pwm-cells = <3>;
> +};
> +
> +/* Verdin PWM_2 */
> +&pwm3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm_3>;
> +	#pwm-cells = <3>;
> +};
> +
> +/* VERDIN I2S_1 */
> +&sai2 {
> +	#sound-dai-cells = <0>;
> +	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
> +	assigned-clock-rates = <24576000>;
> +	assigned-clocks = <&clk IMX8MM_CLK_SAI2>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_sai2>;
> +};
> +
> +&snvs_pwrkey {
> +	status = "okay";
> +};
> +
> +/* Verdin UART_3, used as the Linux console */
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +};
> +
> +/* Verdin UART_1 */
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	uart-has-rtscts;
> +};
> +
> +/* Verdin UART_2 */
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3>;
> +	uart-has-rtscts;
> +};
> +
> +/* Verdin UART_4 */
> +/*
> + * Resource allocated to M4 by default, must not be accessed from Cortex-A35 or you get an OOPS
> + */
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +};
> +
> +&usbmisc1 {
> +	vbus-wakeup-supply = <&reg_vdd_3v3>;
> +};
> +
> +&usbmisc2 {
> +	vbus-wakeup-supply = <&reg_vdd_3v3>;
> +};
> +
> +/* Verdin USB_1 */
> +&usbotg1 {
> +	adp-disable;
> +	dr_mode = "otg";
> +	hnp-disable;
> +	over-current-active-low;
> +	picophy,dc-vol-level-adjust = <7>;
> +	picophy,pre-emp-curr-control = <3>;
> +	srp-disable;
> +	vbus-supply = <&reg_usb_otg1_vbus>;
> +};
> +
> +/* Verdin USB_2 */
> +&usbotg2 {
> +	dr_mode = "host";
> +	over-current-active-low;
> +	picophy,dc-vol-level-adjust = <7>;
> +	picophy,pre-emp-curr-control = <3>;
> +	vbus-supply = <&reg_usb_otg2_vbus>;
> +};
> +
> +&usbphynop1 {
> +	vcc-supply = <&reg_vdd_3v3>;
> +};
> +
> +&usbphynop2 {
> +	vcc-supply = <&reg_vdd_3v3>;
> +};
> +
> +/* On-module eMMC */
> +&usdhc1 {
> +	bus-width = <8>;
> +	keep-power-in-suspend;
> +	non-removable;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
> +	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
> +	status = "okay";
> +};
> +
> +/* Verdin SD_1 */
> +&usdhc2 {
> +	bus-width = <4>;
> +	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
> +	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_cd>;
> +	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_cd>;
> +	vmmc-supply = <&reg_usdhc2_vmmc>;
> +};
> +
> +&wdog1 {
> +	fsl,ext-reset-output;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_wdog>;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpio1>, <&pinctrl_gpio2>,
> +		    <&pinctrl_gpio3>, <&pinctrl_gpio4>,
> +		    <&pinctrl_gpio7>, <&pinctrl_gpio8>,
> +		    <&pinctrl_gpio_hog1>, <&pinctrl_gpio_hog2>, <&pinctrl_gpio_hog3>,
> +		    <&pinctrl_pmic_tpm_ena>;
> +
> +	pinctrl_can1_int: can1intgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x1c4>;	/* CAN_1_SPI_INT#_1.8V */
> +	};
> +
> +	pinctrl_can2_int: can2intgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x1c4>;	/* CAN_2_SPI_INT#_1.8V */
> +	};
> +
> +	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI3_TXD_GPIO5_IO1		0x1c4>;	/* SODIMM 256 */
> +	};
> +
> +	pinctrl_ecspi2: ecspi2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK		0x4>,	/* SODIMM 196 */
> +			<MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI		0x4>,	/* SODIMM 200 */
> +			<MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO		0x1c4>,	/* SODIMM 198 */
> +			<MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x1c4>;	/* SODIMM 202 */
> +	};
> +
> +	pinctrl_ecspi3: ecspi3grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK		0x4>,	/* CAN_SPI_SCK_1.8V */
> +			<MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI		0x4>,	/* CAN_SPI_MOSI_1.8V */
> +			<MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO		0x1c4>,	/* CAN_SPI_MISO_1.8V */
> +			<MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x1c4>,	/* CAN_1_SPI_CS_1.8V# */
> +			<MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x1c4>;	/* CAN_2_SPI_CS#_1.8V */
> +	};
> +
> +	pinctrl_fec1: fec1grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
> +			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
> +			<MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x1f>,
> +			<MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x1f>,
> +			<MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x1f>,
> +			<MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x1f>,
> +			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
> +			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
> +			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
> +			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
> +			<MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f>,
> +			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
> +			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
> +			<MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f>,
> +			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c4>;
> +	};
> +
> +	pinctrl_fec1_sleep: fec1-sleepgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3>,
> +			<MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x3>,
> +			<MX8MM_IOMUXC_ENET_TD3_GPIO1_IO18		0x1f>,
> +			<MX8MM_IOMUXC_ENET_TD2_GPIO1_IO19		0x1f>,
> +			<MX8MM_IOMUXC_ENET_TD1_GPIO1_IO20		0x1f>,
> +			<MX8MM_IOMUXC_ENET_TD0_GPIO1_IO21		0x1f>,
> +			<MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91>,
> +			<MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91>,
> +			<MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91>,
> +			<MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91>,
> +			<MX8MM_IOMUXC_ENET_TXC_GPIO1_IO23		0x1f>,
> +			<MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91>,
> +			<MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91>,
> +			<MX8MM_IOMUXC_ENET_TX_CTL_GPIO1_IO22		0x1f>,
> +			<MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x184>;
> +	};
> +
> +	pinctrl_flexspi0: flexspi0grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2>,	/* SODIMM 52 */
> +			<MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82>,	/* SODIMM 54 */
> +			<MX8MM_IOMUXC_NAND_CE1_B_QSPI_A_SS1_B		0x82>,	/* SODIMM 64 */
> +			<MX8MM_IOMUXC_NAND_DQS_QSPI_A_DQS		0x82>,	/* SODIMM 66 */
> +			<MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0		0x82>,	/* SODIMM 56 */
> +			<MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1		0x82>,	/* SODIMM 58 */
> +			<MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82>,	/* SODIMM 60 */
> +			<MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82>;	/* SODIMM 62 */
> +	};
> +
> +	pinctrl_gpio1: gpio1grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_CE3_B_GPIO3_IO4		0x184>;	/* SODIMM 206 */
> +	};
> +
> +	pinctrl_gpio2: gpio2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5		0x1c4>;	/* SODIMM 208 */
> +	};
> +
> +	pinctrl_gpio3: gpio3grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26		0x184>;	/* SODIMM 210 */
> +	};
> +
> +	pinctrl_gpio4: gpio4grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27		0x184>;	/* SODIMM 212 */
> +	};
> +
> +	pinctrl_gpio5: gpio5grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x184>;	/* SODIMM 216 */
> +	};
> +
> +	pinctrl_gpio6: gpio6grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11		0x184>;	/* SODIMM 218 */
> +	};
> +
> +	pinctrl_gpio7: gpio7grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x184>;	/* SODIMM 220 */
> +	};
> +
> +	pinctrl_gpio8: gpio8grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x184>;	/* SODIMM 222 */
> +	};
> +
> +	/* Verdin GPIO_9_DSI (pulled-up as active-low) */
> +	pinctrl_gpio_9_dsi: gpio9dsigrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_RE_B_GPIO3_IO15		0x1c4>;	/* SODIMM 17 */
> +	};
> +
> +	/* Verdin GPIO_10_DSI */
> +	pinctrl_gpio_10_dsi: gpio10dsigrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_CE2_B_GPIO3_IO3		0x1c4>;	/* SODIMM 21 */
> +	};
> +
> +	pinctrl_gpio_hog1: gpiohog1grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x1c4>,	/* SODIMM 88 */
> +			<MX8MM_IOMUXC_SAI1_RXC_GPIO4_IO1		0x1c4>,	/* SODIMM 90 */
> +			<MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x1c4>,	/* SODIMM 92 */
> +			<MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3		0x1c4>,	/* SODIMM 94 */
> +			<MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4		0x1c4>,	/* SODIMM 96 */
> +			<MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5		0x1c4>,	/* SODIMM 100 */
> +			<MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0		0x1c4>,	/* SODIMM 102 */
> +			<MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11		0x1c4>,	/* SODIMM 104 */
> +			<MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x1c4>,	/* SODIMM 106 */
> +			<MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13		0x1c4>,	/* SODIMM 108 */
> +			<MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14		0x1c4>,	/* SODIMM 112 */
> +			<MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15		0x1c4>,	/* SODIMM 114 */
> +			<MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16		0x1c4>,	/* SODIMM 116 */
> +			<MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18		0x1c4>,	/* SODIMM 118 */
> +			<MX8MM_IOMUXC_SAI1_TXFS_GPIO4_IO10		0x1c4>;	/* SODIMM 120 */
> +	};
> +
> +	pinctrl_gpio_hog2: gpiohog2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2		0x1c4>;	/* SODIMM 91 */
> +	};
> +
> +	pinctrl_gpio_hog3: gpiohog3grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x1c4>,	/* SODIMM 157 */
> +			<MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15		0x1c4>;	/* SODIMM 187 */
> +	};
> +
> +	pinctrl_gpio_keys: gpiokeysgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28		0x1c4>;	/* SODIMM 252 */
> +	};
> +
> +	/* On-module I2C */
> +	pinctrl_i2c1: i2c1grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c6>,	/* PMIC_I2C_SCL */
> +			<MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c6>;	/* PMIC_I2C_SDA */
> +	};
> +
> +	pinctrl_i2c1_gpio: i2c1gpiogrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x400001c6>,	/* PMIC_I2C_SCL */
> +			<MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x400001c6>;	/* PMIC_I2C_SDA */
> +	};
> +
> +	/* Verdin I2C_4_CSI */
> +	pinctrl_i2c2: i2c2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c6>,	/* SODIMM 55 */
> +			<MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c6>;	/* SODIMM 53 */
> +	};
> +
> +	pinctrl_i2c2_gpio: i2c2gpiogrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x400001c6>,	/* SODIMM 55 */
> +			<MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x400001c6>;	/* SODIMM 53 */
> +	};
> +
> +	/* Verdin I2C_2_DSI */
> +	pinctrl_i2c3: i2c3grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c6>,	/* SODIMM 95 */
> +			<MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c6>;	/* SODIMM 93 */
> +	};
> +
> +	pinctrl_i2c3_gpio: i2c3gpiogrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x400001c6>,	/* SODIMM 95 */
> +			<MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x400001c6>;	/* SODIMM 93 */
> +	};
> +
> +	/* Verdin I2C_1 */
> +	pinctrl_i2c4: i2c4grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL			0x400001c6>,	/* SODIMM 14 */
> +			<MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA			0x400001c6>;	/* SODIMM 12 */
> +	};
> +
> +	pinctrl_i2c4_gpio: i2c4gpiogrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20		0x400001c6>,	/* SODIMM 14 */
> +			<MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21		0x400001c6>;	/* SODIMM 12 */
> +	};
> +
> +	/* Verdin I2S_2_BCLK (TOUCH_RESET#) */
> +	pinctrl_i2s_2_bclk_touch_reset: i2s2bclktouchresetgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI5_RXD2_GPIO3_IO23		0x184>;	/* SODIMM 42 */
> +	};
> +
> +	/* Verdin I2S_2_D_OUT shared with SAI5 */
> +	pinctrl_i2s_2_d_out_dsi_1_bkl_en: i2s2doutdsi1bklengrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI5_RXD3_GPIO3_IO24		0x184>;	/* SODIMM 46 */
> +	};
> +
> +	pinctrl_pcie0: pcie0grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI5_RXFS_GPIO3_IO19		0x6>,	/* SODIMM 244 */
> +			/* PMIC_EN_PCIe_CLK, unused */
> +			<MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x6>;
> +	};
> +
> +	pinctrl_pmic: pmicirqgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41>;	/* PMIC_INT# */
> +	};
> +
> +	/* Verdin PWM_3_DSI shared with GPIO1_IO1 */
> +	pinctrl_pwm_1: pwm1grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT		0x6>;	/* SODIMM 19 */
> +	};
> +
> +	pinctrl_pwm_2: pwm2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT			0x6>;	/* SODIMM 15 */
> +	};
> +
> +	pinctrl_pwm_3: pwm3grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT			0x6>;	/* SODIMM 16 */
> +	};
> +
> +	/* Verdin PWM_3_DSI (pulled-down as active-high) shared with PWM1_OUT */
> +	pinctrl_pwm_3_dsi_hpd_gpio: pwm3dsihpdgpiogrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1		0x184>;	/* SODIMM 19 */
> +	};
> +
> +	pinctrl_reg_eth: regethgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD2_WP_GPIO2_IO20			0x184>;	/* PMIC_EN_ETH */
> +	};
> +
> +	pinctrl_reg_usb1_en: regusb1engrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12		0x184>;	/* SODIMM 155 */
> +	};
> +
> +	pinctrl_reg_usb2_en: regusb2engrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14		0x184>;	/* SODIMM 185 */
> +	};
> +
> +	pinctrl_sai2: sai2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI2_TXFS_SAI2_TX_SYNC		0xd6>,	/* SODIMM 32 */
> +			<MX8MM_IOMUXC_SAI2_TXC_SAI2_TX_BCLK		0xd6>,	/* SODIMM 30 */
> +			<MX8MM_IOMUXC_SAI2_MCLK_SAI2_MCLK		0xd6>,	/* SODIMM 38 */
> +			<MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0		0xd6>,	/* SODIMM 36 */
> +			<MX8MM_IOMUXC_SAI2_TXD0_SAI2_TX_DATA0		0xd6>;	/* SODIMM 34 */
> +	};
> +
> +	pinctrl_sai5: sai5grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0		0xd6>,	/* SODIMM 48 */
> +			<MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC		0xd6>,	/* SODIMM 44 */
> +			<MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK		0xd6>,	/* SODIMM 42 */
> +			<MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0		0xd6>;	/* SODIMM 46 */
> +	};
> +
> +	/* control signal for optional ATTPM20P or SE050 */
> +	pinctrl_pmic_tpm_ena: pmictpmenagrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19		0x1c4>;	/* PMIC_TPM_ENA */
> +	};
> +
> +	pinctrl_tsp: tspgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6		0x140>,	/* SODIMM 148 */
> +			<MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7		0x140>,	/* SODIMM 152 */
> +			<MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8		0x140>,	/* SODIMM 154 */
> +			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x140>,	/* SODIMM 179 */
> +			<MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17		0x140>;	/* SODIMM 150 */
> +	};
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX		0x1c4>,	/* SODIMM 149 */
> +			<MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX		0x1c4>;	/* SODIMM 147 */
> +	};
> +
> +	pinctrl_uart2: uart2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x1c4>,	/* SODIMM 129 */
> +			<MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x1c4>,	/* SODIMM 131 */
> +			<MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x1c4>,	/* SODIMM 133 */
> +			<MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x1c4>;	/* SODIMM 135 */
> +	};
> +
> +	pinctrl_uart3: uart3grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x1c4>,	/* SODIMM 137 */
> +			<MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x1c4>,	/* SODIMM 139 */
> +			<MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x1c4>,	/* SODIMM 141 */
> +			<MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B	0x1c4>;	/* SODIMM 143 */
> +	};
> +
> +	pinctrl_uart4: uart4grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x1c4>,	/* SODIMM 151 */
> +			<MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x1c4>;	/* SODIMM 153 */
> +	};
> +
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190>,
> +			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d0>,
> +			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
> +			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x190>;
> +	};
> +
> +	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194>,
> +			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d4>,
> +			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
> +			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x194>;
> +	};
> +
> +	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196>,
> +			<MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7		0x1d6>,
> +			<MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B	0x1d1>,
> +			<MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE		0x196>;
> +	};
> +
> +	pinctrl_usdhc2_cd: usdhc2cdgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x1c4>;	/* SODIMM 84 */
> +	};
> +
> +	pinctrl_usdhc2_pwr_en: usdhc2pwrengrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_CLE_GPIO3_IO5		0x184>;	/* SODIMM 76 */
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190>,	/* SODIMM 78 */
> +			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0>,	/* SODIMM 74 */
> +			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d0>,	/* SODIMM 80 */
> +			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d0>,	/* SODIMM 82 */
> +			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d0>,	/* SODIMM 70 */
> +			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d0>,	/* SODIMM 72 */
> +			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0>;
> +	};
> +
> +	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194>,
> +			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,
> +			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,
> +			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,
> +			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,
> +			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,
> +			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0>;
> +	};
> +
> +	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196>,
> +			<MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6>,
> +			<MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d6>,
> +			<MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d6>,
> +			<MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d6>,
> +			<MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d6>,
> +			<MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT		0x1d0>;
> +	};
> +
> +	/* On-module Wi-Fi/BT or type specific SDHC interface */
> +	/* (e.g. on X52 extension slot of Verdin Development Board) */
> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190>,
> +			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0>,
> +			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0>,
> +			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0>,
> +			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0>,
> +			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0>;
> +	};
> +
> +	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194>,
> +			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4>,
> +			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4>,
> +			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4>,
> +			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4>,
> +			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4>;
> +	};
> +
> +	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196>,
> +			<MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6>,
> +			<MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6>,
> +			<MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6>,
> +			<MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6>,
> +			<MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6>;
> +	};
> +
> +	pinctrl_wdog: wdoggrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6>;	/* PMIC_WDI */
> +	};
> +
> +	pinctrl_wifi_ctrl: wifictrlgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16		0x1c4>,	/* WIFI_WKUP_BT */
> +			<MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9		0x1c4>,	/* WIFI_W_WKUP_HOST */
> +			<MX8MM_IOMUXC_SAI5_RXC_GPIO3_IO20		0x1c4>;	/* WIFI_WKUP_WLAN */
> +	};
> +
> +	pinctrl_wifi_i2s: bti2sgrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI1_RXD4_SAI6_TX_BCLK		0xd6>,	/* WIFI_TX_BCLK */
> +			<MX8MM_IOMUXC_SAI1_RXD5_SAI6_TX_DATA0		0xd6>,	/* WIFI_TX_DATA0 */
> +			<MX8MM_IOMUXC_SAI1_RXD6_SAI6_TX_SYNC		0xd6>,	/* WIFI_TX_SYNC */
> +			<MX8MM_IOMUXC_SAI1_TXD5_SAI6_RX_DATA0		0xd6>;	/* WIFI_RX_DATA0 */
> +	};
> +
> +	pinctrl_wifi_pwr_en: wifipwrengrp {
> +		fsl,pins =
> +			<MX8MM_IOMUXC_SAI5_MCLK_GPIO3_IO25		0x184>;	/* PMIC_EN_WIFI */
> +	};
> +};
> -- 
> 2.33.1
> 



More information about the linux-arm-kernel mailing list