[PATCH 4/6] spi: rockchip: Suspend and resume the bus during NOIRQ_SYSTEM_SLEEP_PM ops

[Jon Lin]

From: shengfei Xu <xsf at rock-chips.com>

the wakeup interrupt handler which is guaranteed not to run while
@resume noirq() is being executed. the patch can help to avoid the
wakeup source try to access spi when the spi is in suspend mode.

Signed-off-by: shengfei Xu <xsf at rock-chips.com>
Signed-off-by: Jon Lin <jon.lin at rock-chips.com>
---

 drivers/spi/spi-rockchip.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-rockchip.c b/drivers/spi/spi-rockchip.c
index 5f6a70664871..5457af616a44 100644
--- a/drivers/spi/spi-rockchip.c
+++ b/drivers/spi/spi-rockchip.c
@@ -959,14 +959,14 @@ static int rockchip_spi_suspend(struct device *dev)
 {
 	int ret;
 	struct spi_controller *ctlr = dev_get_drvdata(dev);
+	struct rockchip_spi *rs = spi_controller_get_devdata(ctlr);
 
 	ret = spi_controller_suspend(ctlr);
 	if (ret < 0)
 		return ret;
 
-	ret = pm_runtime_force_suspend(dev);
-	if (ret < 0)
-		return ret;
+	clk_disable_unprepare(rs->spiclk);
+	clk_disable_unprepare(rs->apb_pclk);
 
 	pinctrl_pm_select_sleep_state(dev);
 
@@ -981,10 +981,14 @@ static int rockchip_spi_resume(struct device *dev)
 
 	pinctrl_pm_select_default_state(dev);
 
-	ret = pm_runtime_force_resume(dev);
+	ret = clk_prepare_enable(rs->apb_pclk);
 	if (ret < 0)
 		return ret;
 
+	ret = clk_prepare_enable(rs->spiclk);
+	if (ret < 0)
+		clk_disable_unprepare(rs->apb_pclk);
+
 	ret = spi_controller_resume(ctlr);
 	if (ret < 0) {
 		clk_disable_unprepare(rs->spiclk);
@@ -1026,7 +1030,7 @@ static int rockchip_spi_runtime_resume(struct device *dev)
 #endif /* CONFIG_PM */
 
 static const struct dev_pm_ops rockchip_spi_pm = {
-	SET_SYSTEM_SLEEP_PM_OPS(rockchip_spi_suspend, rockchip_spi_resume)
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(rockchip_spi_suspend, rockchip_spi_resume)
 	SET_RUNTIME_PM_OPS(rockchip_spi_runtime_suspend,
 			   rockchip_spi_runtime_resume, NULL)
 };
-- 
2.17.1