[PATCH 1/2] ARM: dts: armada-xp: add interrupts for watchdog

[Chris Packham]

The first interrupt is for the regular watchdog timeout. Normally the
RSTOUT line will trigger a reset before this interrupt fires but on
systems with a non-standard reset it may still trigger.

The second interrupt is for a timer1 which is used as a pre-timeout for
the watchdog.

Signed-off-by: Chris Packham <chris.packham at alliedtelesis.co.nz>
---
 arch/arm/boot/dts/armada-xp-98dx3236.dtsi | 1 +
 arch/arm/boot/dts/armada-xp.dtsi          | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
index 38a052a0312d..0e561dfc0ca9 100644
--- a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -286,6 +286,7 @@ &watchdog {
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 6c19984d668e..4297482da62f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -260,6 +260,7 @@ &watchdog {
 	compatible = "marvell,armada-xp-wdt";
 	clocks = <&coreclk 2>, <&refclk>;
 	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
 };
 
 &cpurst {
-- 
2.35.1