[PATCH v2] drm/mediatek: allow commands to be sent during video mode

Chun-Kuang Hu chunkuang.hu at kernel.org
Thu Feb 10 06:47:05 PST 2022


Hi, Julien:

Julien STEPHAN <jstephan at baylibre.com> 於 2022年2月10日 週四 下午8:47寫道:
>
> Mipi dsi panel drivers can use mipi_dsi_dcs_{set,get}_display_brightness()
> to request backlight changes.
>
> This can be done during panel initialization (dsi is in command mode)
> or afterwards (dsi is in Video Mode).
>
> When the DSI is in Video Mode, all commands are rejected.
>
> Detect current DSI mode in mtk_dsi_host_transfer() and switch modes
> temporarily to allow commands to be sent.

Reviewed-by: Chun-Kuang Hu <chunkuang.hu at kernel.org>

>
> Signed-off-by: Julien STEPHAN <jstephan at baylibre.com>
> Signed-off-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> ---
> Changes in v2:
>   - update commit message to be more descriptive
>
>  drivers/gpu/drm/mediatek/mtk_dsi.c | 34 ++++++++++++++++++++++--------
>  1 file changed, 25 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 5d90d2eb0019..7d66fdc7f81d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -891,24 +891,34 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
>         u8 read_data[16];
>         void *src_addr;
>         u8 irq_flag = CMD_DONE_INT_FLAG;
> -
> -       if (readl(dsi->regs + DSI_MODE_CTRL) & MODE) {
> -               DRM_ERROR("dsi engine is not command mode\n");
> -               return -EINVAL;
> +       u32 dsi_mode;
> +
> +       dsi_mode = readl(dsi->regs + DSI_MODE_CTRL);
> +       if (dsi_mode & MODE) {
> +               mtk_dsi_stop(dsi);
> +               if (mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
> +                       recv_cnt = -EINVAL;
> +                       goto restore_dsi_mode;
> +               }
>         }
>
>         if (MTK_DSI_HOST_IS_READ(msg->type))
>                 irq_flag |= LPRX_RD_RDY_INT_FLAG;
>
> -       if (mtk_dsi_host_send_cmd(dsi, msg, irq_flag) < 0)
> -               return -ETIME;
> +       if (mtk_dsi_host_send_cmd(dsi, msg, irq_flag) < 0) {
> +               recv_cnt = -ETIME;
> +               goto restore_dsi_mode;
> +       }
>
> -       if (!MTK_DSI_HOST_IS_READ(msg->type))
> -               return 0;
> +       if (!MTK_DSI_HOST_IS_READ(msg->type)) {
> +               recv_cnt = 0;
> +               goto restore_dsi_mode;
> +       }
>
>         if (!msg->rx_buf) {
>                 DRM_ERROR("dsi receive buffer size may be NULL\n");
> -               return -EINVAL;
> +               recv_cnt = -EINVAL;
> +               goto restore_dsi_mode;
>         }
>
>         for (i = 0; i < 16; i++)
> @@ -933,6 +943,12 @@ static ssize_t mtk_dsi_host_transfer(struct mipi_dsi_host *host,
>         DRM_INFO("dsi get %d byte data from the panel address(0x%x)\n",
>                  recv_cnt, *((u8 *)(msg->tx_buf)));
>
> +restore_dsi_mode:
> +       if (dsi_mode & MODE) {
> +               mtk_dsi_set_mode(dsi);
> +               mtk_dsi_start(dsi);
> +       }
> +
>         return recv_cnt;
>  }
>
> --
> 2.35.1
>



More information about the linux-arm-kernel mailing list