[PATCH 1/4] soc: octeontx2-sdp: Add SDP PF driver support
Radha Mohan Chintakuntla
radhac at marvell.com
Wed Feb 9 14:42:07 PST 2022
This patch adds base support to the SDP PF driver under the RVU PFs
found in Marvell OcteonTx2 SoCs. The driver configures the SRIOV and
allocates interrupts.
Signed-off-by: Radha Mohan Chintakuntla <radhac at marvell.com>
---
MAINTAINERS | 7 +
drivers/soc/Kconfig | 1 +
drivers/soc/Makefile | 1 +
drivers/soc/marvell/Kconfig | 18 +
drivers/soc/marvell/Makefile | 2 +
drivers/soc/marvell/octeontx2-sdp/Makefile | 9 +
drivers/soc/marvell/octeontx2-sdp/sdp.c | 363 +++++++++++++++++++++
drivers/soc/marvell/octeontx2-sdp/sdp.h | 61 ++++
8 files changed, 462 insertions(+)
create mode 100644 drivers/soc/marvell/Kconfig
create mode 100644 drivers/soc/marvell/Makefile
create mode 100644 drivers/soc/marvell/octeontx2-sdp/Makefile
create mode 100644 drivers/soc/marvell/octeontx2-sdp/sdp.c
create mode 100644 drivers/soc/marvell/octeontx2-sdp/sdp.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 3e461db9cd91..fb48e0317d34 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11558,6 +11558,13 @@ S: Supported
F: Documentation/networking/device_drivers/ethernet/marvell/octeontx2.rst
F: drivers/net/ethernet/marvell/octeontx2/af/
+MARVELL OCTEONTX2 SDP PHYISCAL FUNCTION DRIVER
+M: Radha Mohan Chintakuntla <radhac at marvell.com>
+M: Veerasenareddy Burry <vburru at marvell.com>
+L: linux-arm-kernel at lists.infradead.org
+S: Supported
+F: drivers/soc/marvell/octeontx2-sdp
+
MARVELL PRESTERA ETHERNET SWITCH DRIVER
M: Taras Chornyi <tchornyi at marvell.com>
S: Supported
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index a8562678c437..bfb1d993d257 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -12,6 +12,7 @@ source "drivers/soc/fsl/Kconfig"
source "drivers/soc/imx/Kconfig"
source "drivers/soc/ixp4xx/Kconfig"
source "drivers/soc/litex/Kconfig"
+source "drivers/soc/marvell/Kconfig"
source "drivers/soc/mediatek/Kconfig"
source "drivers/soc/qcom/Kconfig"
source "drivers/soc/renesas/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index adb30c2d4fea..1b6f1574b759 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -17,6 +17,7 @@ obj-y += imx/
obj-y += ixp4xx/
obj-$(CONFIG_SOC_XWAY) += lantiq/
obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
+obj-y += marvell/
obj-y += mediatek/
obj-y += amlogic/
obj-y += qcom/
diff --git a/drivers/soc/marvell/Kconfig b/drivers/soc/marvell/Kconfig
new file mode 100644
index 000000000000..4e8f8a60b3df
--- /dev/null
+++ b/drivers/soc/marvell/Kconfig
@@ -0,0 +1,18 @@
+#
+# MARVELL SoC drivers
+#
+
+menu "Marvell SoC drivers"
+
+config OCTEONTX2_SDP_PF
+ tristate "OcteonTX2 SDP PF driver"
+ depends on ARM64 && PCI && OCTEONTX2_AF && OCTEONTX2_MBOX
+ default y
+ help
+ This driver configures the SDP RVU PF when OcteonTx is in PCIe EndPoint
+ mode. It sets up the SDP rings and the VFs to be used in packet transfer
+ using the NIX block.
+
+ To compile this as a module choose M here.
+
+endmenu
diff --git a/drivers/soc/marvell/Makefile b/drivers/soc/marvell/Makefile
new file mode 100644
index 000000000000..9a9a4435d64d
--- /dev/null
+++ b/drivers/soc/marvell/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-y += octeontx2-sdp/
diff --git a/drivers/soc/marvell/octeontx2-sdp/Makefile b/drivers/soc/marvell/octeontx2-sdp/Makefile
new file mode 100644
index 000000000000..16a5d353ea44
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2-sdp/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Marvell's OcteonTX2 SDP PF driver
+#
+
+obj-$(CONFIG_OCTEONTX2_SDP_PF) += octeontx2_sdp.o
+
+octeontx2_sdp-y := sdp.o
+ccflags-y += -I$(srctree)/drivers/net/ethernet/marvell/octeontx2/af
diff --git a/drivers/soc/marvell/octeontx2-sdp/sdp.c b/drivers/soc/marvell/octeontx2-sdp/sdp.c
new file mode 100644
index 000000000000..dda85b5c0264
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2-sdp/sdp.c
@@ -0,0 +1,363 @@
+// SPDX-License-Identifier: GPL-2.0
+/* OcteonTX2 SDP driver
+ *
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/sysfs.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "rvu.h"
+#include "rvu_reg.h"
+#include "rvu_struct.h"
+#include "sdp.h"
+
+#define DRV_NAME "octeontx2-sdp"
+#define DRV_VERSION "1.1"
+
+#define PCI_DEVID_OCTEONTX2_SDP_PF 0xA0F6
+/* PCI BARs */
+#define PCI_AF_REG_BAR_NUM 0
+#define PCI_CFG_REG_BAR_NUM 2
+#define MBOX_BAR_NUM 4
+
+#define SDP_PPAIR_THOLD 0x400
+
+static void
+sdp_write64(struct sdp_dev *rvu, u64 b, u64 s, u64 o, u64 v)
+{
+ writeq(v, rvu->bar2 + ((b << 20) | (s << 12) | o));
+}
+
+static u64 sdp_read64(struct sdp_dev *rvu, u64 b, u64 s, u64 o)
+{
+ return readq(rvu->bar2 + ((b << 20) | (s << 12) | o));
+}
+
+static int sdp_check_pf_usable(struct sdp_dev *sdp)
+{
+ u64 rev;
+
+ rev = sdp_read64(sdp, BLKADDR_RVUM, 0,
+ RVU_PF_BLOCK_ADDRX_DISC(BLKADDR_RVUM));
+ rev = (rev >> 12) & 0xFF;
+ /* Check if AF has setup revision for RVUM block,
+ * otherwise this driver probe should be deferred
+ * until AF driver comes up.
+ */
+ if (!rev) {
+ dev_warn(&sdp->pdev->dev,
+ "AF is not initialized, deferring probe\n");
+ return -EPROBE_DEFER;
+ }
+ return 0;
+}
+
+static int sdp_alloc_irqs(struct pci_dev *pdev)
+{
+ struct sdp_dev *sdp;
+ int err;
+
+ sdp = pci_get_drvdata(pdev);
+
+ /* Get number of MSIX vector count and allocate vectors first */
+ sdp->msix_count = pci_msix_vec_count(pdev);
+
+ err = pci_alloc_irq_vectors(pdev, sdp->msix_count, sdp->msix_count,
+ PCI_IRQ_MSIX);
+
+ if (err < 0) {
+ dev_err(&pdev->dev, "pci_alloc_irq_vectors() failed %d\n", err);
+ return err;
+ }
+
+ sdp->irq_names = kmalloc_array(sdp->msix_count, NAME_SIZE, GFP_KERNEL);
+ if (!sdp->irq_names) {
+ err = -ENOMEM;
+ goto err_irq_names;
+ }
+
+ sdp->irq_allocated = kcalloc(sdp->msix_count, sizeof(bool), GFP_KERNEL);
+ if (!sdp->irq_allocated) {
+ err = -ENOMEM;
+ goto err_irq_allocated;
+ }
+
+ return 0;
+
+err_irq_allocated:
+ kfree(sdp->irq_names);
+ sdp->irq_names = NULL;
+err_irq_names:
+ pci_free_irq_vectors(pdev);
+ sdp->msix_count = 0;
+
+ return err;
+}
+
+static void sdp_free_irqs(struct pci_dev *pdev)
+{
+ struct sdp_dev *sdp;
+ int irq;
+
+ sdp = pci_get_drvdata(pdev);
+ for (irq = 0; irq < sdp->msix_count; irq++) {
+ if (sdp->irq_allocated[irq])
+ free_irq(pci_irq_vector(sdp->pdev, irq), sdp);
+ }
+
+ pci_free_irq_vectors(pdev);
+
+ kfree(sdp->irq_names);
+ kfree(sdp->irq_allocated);
+}
+
+static int __sriov_disable(struct pci_dev *pdev)
+{
+ struct sdp_dev *sdp;
+
+ sdp = pci_get_drvdata(pdev);
+ if (pci_vfs_assigned(pdev)) {
+ dev_err(&pdev->dev, "Disabing VFs while VFs are assigned\n");
+ dev_err(&pdev->dev, "VFs will not be freed\n");
+ return -EPERM;
+ }
+
+ pci_disable_sriov(pdev);
+
+ kfree(sdp->vf_info);
+ sdp->vf_info = NULL;
+
+ return 0;
+}
+
+static int __sriov_enable(struct pci_dev *pdev, int num_vfs)
+{
+ struct rvu_vf *vf_ptr;
+ int curr_vfs, vf = 0;
+ struct sdp_dev *sdp;
+ int err;
+
+ curr_vfs = pci_num_vf(pdev);
+ if (!curr_vfs && !num_vfs)
+ return -EINVAL;
+
+ if (curr_vfs) {
+ dev_err(
+ &pdev->dev,
+ "Virtual Functions are already enabled on this device\n");
+ return -EINVAL;
+ }
+ if (num_vfs > SDP_MAX_VFS)
+ num_vfs = SDP_MAX_VFS;
+
+ sdp = pci_get_drvdata(pdev);
+
+ if (sdp_get_available_rsrcs(sdp)) {
+ dev_err(&pdev->dev, "Failed to get resource limits.\n");
+ return -EFAULT;
+ }
+
+ sdp->vf_info = kcalloc(num_vfs, sizeof(struct rvu_vf), GFP_KERNEL);
+ if (sdp->vf_info == NULL)
+ return -ENOMEM;
+
+ sdp->num_vfs = num_vfs;
+
+ err = pci_enable_sriov(pdev, num_vfs);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to enable to SRIOV VFs: %d\n", err);
+ goto err_enable_sriov;
+ }
+
+ return num_vfs;
+}
+
+static int sdp_sriov_configure(struct pci_dev *pdev, int num_vfs)
+{
+ if (num_vfs == 0)
+ return __sriov_disable(pdev);
+ else
+ return __sriov_enable(pdev, num_vfs);
+}
+
+
+static int sdp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ uint64_t inst, regval;
+ struct sdp_dev *sdp;
+ struct device *dev;
+ int err;
+
+ dev = &pdev->dev;
+ sdp = devm_kzalloc(dev, sizeof(struct sdp_dev), GFP_KERNEL);
+ if (sdp == NULL)
+ return -ENOMEM;
+
+ sdp->pdev = pdev;
+ pci_set_drvdata(pdev, sdp);
+
+ mutex_init(&sdp->lock);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(dev, "Failed to enable PCI device\n");
+ goto enable_failed;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ dev_err(dev, "PCI request regions failed 0x%x\n", err);
+ goto map_failed;
+ }
+
+ if (pci_sriov_get_totalvfs(pdev) <= 0) {
+ err = -ENODEV;
+ goto set_mask_failed;
+ }
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(48));
+ if (err) {
+ dev_err(dev, "Unable to set DMA mask\n");
+ goto set_mask_failed;
+ }
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(48));
+ if (err) {
+ dev_err(dev, "Unable to set DMA mask\n");
+ goto set_mask_failed;
+ }
+
+ pci_set_master(pdev);
+
+ /* CSR Space mapping */
+ sdp->bar2 = pcim_iomap(pdev, PCI_CFG_REG_BAR_NUM,
+ pci_resource_len(pdev, PCI_CFG_REG_BAR_NUM));
+ if (!sdp->bar2) {
+ dev_err(&pdev->dev, "Unable to map BAR2\n");
+ err = -ENODEV;
+ goto set_mask_failed;
+ }
+
+ err = sdp_check_pf_usable(sdp);
+ if (err)
+ goto pf_unusable;
+
+ /* Map SDP register area */
+ /* right now only 2 SDP blocks are supported */
+ inst = list_empty(&sdp_dev_lst_head) ? 0 : 1;
+ sdp->sdp_base = ioremap(SDP_BASE(inst), SDP_REG_SIZE);
+ if (!sdp->sdp_base) {
+ dev_err(&pdev->dev, "Unable to map SDP CSR space\n");
+ err = -ENODEV;
+ goto pf_unusable;
+ }
+ /* Map PF-AF mailbox memory */
+ sdp->af_mbx_base = ioremap_wc(pci_resource_start(pdev, MBOX_BAR_NUM),
+ pci_resource_len(pdev, MBOX_BAR_NUM));
+ if (!sdp->af_mbx_base) {
+ dev_err(&pdev->dev, "Unable to map BAR4\n");
+ err = -ENODEV;
+ goto pf_unusable;
+ }
+
+ if (sdp_alloc_irqs(pdev)) {
+ dev_err(&pdev->dev,
+ "Unable to allocate MSIX Interrupt vectors\n");
+ err = -ENODEV;
+ goto alloc_irqs_failed;
+ }
+
+ regval = readq(sdp->sdp_base + SDPX_GBL_CONTROL);
+ regval |= (1 << 2); /* BPFLR_D disable clearing BP in FLR */
+ writeq(regval, sdp->sdp_base + SDPX_GBL_CONTROL);
+
+ sdp_sriov_configure(sdp->pdev, sdp->info.max_vfs);
+
+ spin_lock(&sdp_lst_lock);
+ list_add(&sdp->list, &sdp_dev_lst_head);
+ spin_unlock(&sdp_lst_lock);
+
+ return 0;
+
+alloc_irqs_failed:
+ iounmap(sdp->af_mbx_base);
+pf_unusable:
+ pcim_iounmap(pdev, sdp->bar2);
+set_mask_failed:
+ pci_release_regions(pdev);
+map_failed:
+ pci_disable_device(pdev);
+enable_failed:
+ pci_set_drvdata(pdev, NULL);
+ devm_kfree(dev, sdp);
+ return err;
+}
+
+static void sdp_remove(struct pci_dev *pdev)
+{
+ struct sdp_dev *sdp = pci_get_drvdata(pdev);
+
+
+ spin_lock(&sdp_lst_lock);
+ list_del(&sdp->list);
+ spin_unlock(&sdp_lst_lock);
+
+ if (sdp->num_vfs)
+ __sriov_disable(pdev);
+
+ sdp_free_irqs(pdev);
+
+ if (sdp->af_mbx_base)
+ iounmap(sdp->af_mbx_base);
+ if (sdp->bar2)
+ pcim_iounmap(pdev, sdp->bar2);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ devm_kfree(&pdev->dev, sdp);
+}
+
+static const struct pci_device_id rvu_sdp_id_table[] = {
+ {PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX2_SDP_PF)},
+ {0} /* end of table */
+};
+
+static struct pci_driver sdp_driver = {
+ .name = DRV_NAME,
+ .id_table = rvu_sdp_id_table,
+ .probe = sdp_probe,
+ .remove = sdp_remove,
+ .sriov_configure = sdp_sriov_configure,
+};
+
+static int __init otx2_sdp_init_module(void)
+{
+ pr_info("%s\n", DRV_NAME);
+
+ spin_lock_init(&sdp_lst_lock);
+ return pci_register_driver(&sdp_driver);
+}
+
+static void __exit otx2_sdp_exit_module(void)
+{
+ pci_unregister_driver(&sdp_driver);
+}
+
+module_init(otx2_sdp_init_module);
+module_exit(otx2_sdp_exit_module);
+MODULE_AUTHOR("Marvell International Ltd.");
+MODULE_DESCRIPTION("Marvell OcteonTX2 SDP PF Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, rvu_sdp_id_table);
diff --git a/drivers/soc/marvell/octeontx2-sdp/sdp.h b/drivers/soc/marvell/octeontx2-sdp/sdp.h
new file mode 100644
index 000000000000..c8ef7a2ade45
--- /dev/null
+++ b/drivers/soc/marvell/octeontx2-sdp/sdp.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * OcteonTX2 SDP driver
+ *
+ * Copyright (C) 2022 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SDP_H_
+#define SDP_H_
+
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/pci.h>
+#include "mbox.h"
+
+#define SDP_BASE(a) (0x86E080000000ull | a << 36)
+#define SDP_REG_SIZE 0x42000000
+
+#define SDPX_GBL_CONTROL (0x40080200ull)
+
+struct sdp_dev {
+ struct list_head list;
+ struct mutex lock;
+ struct pci_dev *pdev;
+ void __iomem *sdp_base;
+ void __iomem *bar2;
+ void __iomem *af_mbx_base;
+#define SDP_VF_ENABLED 0x1
+ u32 flags;
+ u32 num_vfs;
+ u16 chan_base;
+ u16 num_chan;
+ bool *irq_allocated;
+ char *irq_names;
+ int msix_count;
+ int pf;
+ u8 valid_ep_pem_mask;
+ u8 mac_mask;
+
+ struct sdp_node_info info;
+ struct rvu_vf *vf_info;
+ struct free_rsrcs_rsp limits; /* Maximum limits for all VFs */
+};
+
+struct rvu_vf {
+ struct work_struct pfvf_flr_work;
+ struct device_attribute in_use_attr;
+ struct pci_dev *pdev;
+ struct kobject *limits_kobj;
+ /* pointer to PF struct this PF belongs to */
+ struct sdp_dev *sdp;
+ int vf_id;
+ int intr_idx; /* vf_id%64 actually */
+ bool in_use;
+ bool got_flr;
+};
+
+
+#endif
--
2.24.1
More information about the linux-arm-kernel
mailing list