[PATCH v5 02/23] drm/rockchip: dw_hdmi: Do not leave clock enabled in error case

[Sascha Hauer]

The driver returns an error when devm_phy_optional_get() fails leaving
the previously enabled clock turned on. Change order and enable the
clock only after the phy has been acquired.

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 830bdd5e9b7c..8677c8271678 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -529,13 +529,6 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
-	ret = clk_prepare_enable(hdmi->vpll_clk);
-	if (ret) {
-		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
-			      ret);
-		return ret;
-	}
-
 	hdmi->phy = devm_phy_optional_get(dev, "hdmi");
 	if (IS_ERR(hdmi->phy)) {
 		ret = PTR_ERR(hdmi->phy);
@@ -544,6 +537,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 		return ret;
 	}
 
+	ret = clk_prepare_enable(hdmi->vpll_clk);
+	if (ret) {
+		DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n",
+			      ret);
+		return ret;
+	}
+
 	drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs);
 	drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
 
-- 
2.30.2