[RFC 2/2] PCI: imx6: Enable imx6qp pcie power management support

[Richard Zhu]

i.MX6QP PCIe supports the RESET logic, thus it can support
the L2 exit by the reset mechanism.
Enable the i.MX6QP PCIe suspend/resume operations support.

Signed-off-by: Richard Zhu <hongxing.zhu at nxp.com>
---
 drivers/pci/controller/dwc/pci-imx6.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 784801f2f9e6..62262483470a 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -995,6 +995,7 @@ static void imx6_pcie_pm_turnoff(struct imx6_pcie *imx6_pcie)
 	/* Others poke directly at IOMUXC registers */
 	switch (imx6_pcie->drvdata->variant) {
 	case IMX6SX:
+	case IMX6QP:
 		regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
 				IMX6SX_GPR12_PCIE_PM_TURN_OFF,
 				IMX6SX_GPR12_PCIE_PM_TURN_OFF);
@@ -1307,7 +1308,8 @@ static const struct imx6_pcie_drvdata drvdata[] = {
 	[IMX6QP] = {
 		.variant = IMX6QP,
 		.flags = IMX6_PCIE_FLAG_IMX6_PHY |
-			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE,
+			 IMX6_PCIE_FLAG_IMX6_SPEED_CHANGE |
+			 IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
 		.dbi_length = 0x200,
 	},
 	[IMX7D] = {
-- 
2.25.1