[PATCH v5 06/11] ARM: dts: bcm2711: Add unicam CSI nodes

[Jean-Michel Hautbois]

Add both MIPI CSI-2 nodes in the core bcm2711 tree. Use the 3-cells
interrupt declaration, corresponding clocks and default as disabled.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois at ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm/boot/dts/bcm2711-rpi.dtsi | 15 +++++++++++++++
 arch/arm/boot/dts/bcm2711.dtsi     | 22 ++++++++++++++++++++++
 2 files changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
index ca266c5d9f9b..97ee494891af 100644
--- a/arch/arm/boot/dts/bcm2711-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm2835-rpi.dtsi"
 
+#include <dt-bindings/power/raspberrypi-power.h>
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
 
 / {
@@ -18,6 +19,20 @@ aliases {
 	};
 };
 
+&csi0 {
+	clocks = <&clocks BCM2835_CLOCK_CAM0>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM0>;
+};
+
+&csi1 {
+	clocks = <&clocks BCM2835_CLOCK_CAM1>,
+		 <&firmware_clocks 4>;
+	clock-names = "lp", "vpu";
+	power-domains = <&power RPI_POWER_DOMAIN_UNICAM1>;
+};
+
 &firmware {
 	firmware_clocks: clocks {
 		compatible = "raspberrypi,firmware-clocks";
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index dff18fc9a906..21eb10122e50 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -293,6 +293,28 @@ hvs: hvs at 7e400000 {
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		csi0: csi at 7e800000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e800000 0x800>,
+			      <0x7e802000 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			port {
+			};
+		};
+
+		csi1: csi at 7e801000 {
+			compatible = "brcm,bcm2835-unicam";
+			reg = <0x7e801000 0x800>,
+			      <0x7e802004 0x4>;
+			reg-names = "unicam", "cmi";
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+			port {
+			};
+		};
+
 		pixelvalve3: pixelvalve at 7ec12000 {
 			compatible = "brcm,bcm2711-pixelvalve3";
 			reg = <0x7ec12000 0x100>;
-- 
2.32.0