[PATCH v8 03/13] ARM: dts: aspeed: Add PECI controller nodes
Iwona Winiarska
iwona.winiarska at intel.com
Tue Feb 8 07:36:29 PST 2022
Add PECI controller nodes with all required information.
Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
Signed-off-by: Iwona Winiarska <iwona.winiarska at intel.com>
Reviewed-by: Joel Stanley <joel at jms.id.au>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 11 +++++++++++
arch/arm/boot/dts/aspeed-g5.dtsi | 11 +++++++++++
arch/arm/boot/dts/aspeed-g6.dtsi | 11 +++++++++++
3 files changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index f14dace34c5a..fa8b581c3d6c 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -392,6 +392,17 @@ uart_routing: uart-routing at 9c {
};
};
+ peci0: peci-controller at 1e78b000 {
+ compatible = "aspeed,ast2400-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
uart2: serial at 1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index 7495f93c5069..4147b397c883 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -516,6 +516,17 @@ ibt: ibt at 140 {
};
};
+ peci0: peci-controller at 1e78b000 {
+ compatible = "aspeed,ast2500-peci";
+ reg = <0x1e78b000 0x60>;
+ interrupts = <15>;
+ clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
uart2: serial at 1e78d000 {
compatible = "ns16550a";
reg = <0x1e78d000 0x20>;
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index c32e87fad4dc..3d5ce9da42c3 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -512,6 +512,17 @@ wdt4: watchdog at 1e7850c0 {
status = "disabled";
};
+ peci0: peci-controller at 1e78b000 {
+ compatible = "aspeed,ast2600-peci";
+ reg = <0x1e78b000 0x100>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+ resets = <&syscon ASPEED_RESET_PECI>;
+ cmd-timeout-ms = <1000>;
+ clock-frequency = <1000000>;
+ status = "disabled";
+ };
+
lpc: lpc at 1e789000 {
compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
reg = <0x1e789000 0x1000>;
--
2.34.1
More information about the linux-arm-kernel
mailing list