[PATCH 5/5] ARM: dts: imx6qdl-mba6: Move pinmux to regulator node

[Alexander Stein]

GPIO2_IO00 is used by reg_pcie, move the pinmuxing to this node as well.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
 arch/arm/boot/dts/imx6qdl-mba6.dtsi | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
index 9aacc1a62189..f4dca20669d6 100644
--- a/arch/arm/boot/dts/imx6qdl-mba6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -86,6 +86,8 @@ reg_mba6_3p3v: regulator-mba6-3p3v {
 
 	reg_pcie: regulator-pcie {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
 		regulator-name = "supply-pcie";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
@@ -436,8 +438,6 @@ pinctrl_pcie: pciegrp {
 			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
 			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
 			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
-			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
-			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
 		>;
 	};
 
@@ -462,6 +462,13 @@ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
 		>;
 	};
 
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
-- 
2.25.1