[PATCH 1/2] serial: mctrl_gpio: add a new API to enable / disable wake_irq
Greg Kroah-Hartman
gregkh at linuxfoundation.org
Tue Feb 8 02:07:04 PST 2022
On Fri, Feb 04, 2022 at 04:41:58PM +0100, Erwan LE RAY wrote:
> Hi Andy,
>
> On 2/4/22 10:07 AM, Andy Shevchenko wrote:
> >
> >
> > On Thursday, February 3, 2022, Erwan Le Ray <erwan.leray at foss.st.com
> > <mailto:erwan.leray at foss.st.com>> wrote:
> >
> > Add a new API to enable / disable wake_irq in order to enable gpio
> > irqs as
> > wakeup irqs for the uart port.
> >
> > Signed-off-by: Erwan Le Ray <erwan.leray at foss.st.com
> > <mailto:erwan.leray at foss.st.com>>
> >
> > diff --git a/drivers/tty/serial/serial_mctrl_gpio.c
> > b/drivers/tty/serial/serial_mctrl_gpio.c
> > index c41d8911ce95..1663b3afc3a0 100644
> > --- a/drivers/tty/serial/serial_mctrl_gpio.c
> > +++ b/drivers/tty/serial/serial_mctrl_gpio.c
> > @@ -299,4 +299,42 @@ void mctrl_gpio_disable_ms(struct mctrl_gpios
> > *gpios)
> > }
> > EXPORT_SYMBOL_GPL(mctrl_gpio_disable_ms);
> >
> > +void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios)
> > +{
> > + enum mctrl_gpio_idx i;
> > +
> > + if (!gpios)
> > + return;
> > +
> > + if (!gpios->mctrl_on)
> > + return;
> > +
> > + for (i = 0; i < UART_GPIO_MAX; ++i) {
> > + if (!gpios->irq[i])
> > + continue;
> >
> >
> >
> > Why not simply
> >
> > if (gpios[])
> > enable_irq_...
> >
> > ?
> >
> > And same for disabling.
> >
> > +
> > + enable_irq_wake(gpios->irq[i]);
> > + }
> > +}
> > +EXPORT_SYMBOL_GPL(mctrl_gpio_enable_irq_wake);
> > +
> > +void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios)
> > +{
> > + enum mctrl_gpio_idx i;
> > +
> > + if (!gpios)
> > + return;
> > +
> > + if (!gpios->mctrl_on)
> > + return;
> > +
> > + for (i = 0; i < UART_GPIO_MAX; ++i) {
> > + if (!gpios->irq[i])
> > + continue;
> > +
> > + disable_irq_wake(gpios->irq[i]);
> > + }
> > +}
> > +EXPORT_SYMBOL_GPL(mctrl_gpio_disable_irq_wake);
> > +
> > MODULE_LICENSE("GPL");
> > diff --git a/drivers/tty/serial/serial_mctrl_gpio.h
> > b/drivers/tty/serial/serial_mctrl_gpio.h
> > index b134a0ffc894..fc76910fb105 100644
> > --- a/drivers/tty/serial/serial_mctrl_gpio.h
> > +++ b/drivers/tty/serial/serial_mctrl_gpio.h
> > @@ -91,6 +91,16 @@ void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios);
> > */
> > void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios);
> >
> > +/*
> > + * Enable gpio wakeup interrupts to enable wake up source.
> > + */
> > +void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios);
> > +
> > +/*
> > + * Disable gpio wakeup interrupts to enable wake up source.
> > + */
> > +void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios);
> > +
> > #else /* GPIOLIB */
> >
> > static inline
> > @@ -142,6 +152,14 @@ static inline void mctrl_gpio_disable_ms(struct
> > mctrl_gpios *gpios)
> > {
> > }
> >
> > +static inline void mctrl_gpio_enable_irq_wake(struct mctrl_gpios
> > *gpios)
> > +{
> > +}
> > +
> > +static inline void mctrl_gpio_disable_irq_wake(struct mctrl_gpios
> > *gpios)
> > +{
> > +}
> > +
> > #endif /* GPIOLIB */
> >
> > #endif
> > -- 2.17.1
> >
> >
> >
> > --
> > With Best Regards,
> > Andy Shevchenko
> >
> >
>
> Thanks for your review.
> I fully agree with your comment, but I wrote this code like it is to keep
> the same structure than all the other ops of serial_mcrtrl_gpio driver. I
> preferred keeping an homogeneous code in the driver rather than breaking the
> driver homogeneity with the addition of an optimized code.
>
> Greg, can you please indicate which solution you recommend ?
Sadly, this is the format in this file, so I'll take this as-is.
thanks,
greg k-h
More information about the linux-arm-kernel
mailing list