[PATCH 6/8] media: imx: imx7_media-csi: Add support for additional Bayer patterns

[Alexander Stein]

imx7_csi_configure() allows configuring these Bayer patterns when
starting a stream. So allow these in link_validate() as well.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
I'm wondering if V4L2_PIX_FMT_SBGGR16 (and their variants) is correct in this
function. imx7_csi_configure() does not list MEDIA_BUS_FMT_Sxxxx16_1X16.
Also I can't find a proper a proper setting in CSI_CR18 of CSI Bridge in
IMX8M Mini RM for RAW16. The feature list names a  "16-bit data port for
Bayer data input", but is it actually supported? I do not know anything about
the MIPI CSI data formats though. Maybe someone else can clarify this.

 drivers/staging/media/imx/imx7-media-csi.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/staging/media/imx/imx7-media-csi.c b/drivers/staging/media/imx/imx7-media-csi.c
index 158d2a736c6d..7e737221f187 100644
--- a/drivers/staging/media/imx/imx7-media-csi.c
+++ b/drivers/staging/media/imx/imx7-media-csi.c
@@ -1004,6 +1004,18 @@ static int imx7_csi_pad_link_validate(struct v4l2_subdev *sd,
 	case V4L2_PIX_FMT_SGBRG8:
 	case V4L2_PIX_FMT_SGRBG8:
 	case V4L2_PIX_FMT_SRGGB8:
+	case V4L2_PIX_FMT_SBGGR10:
+	case V4L2_PIX_FMT_SGBRG10:
+	case V4L2_PIX_FMT_SGRBG10:
+	case V4L2_PIX_FMT_SRGGB10:
+	case V4L2_PIX_FMT_SBGGR12:
+	case V4L2_PIX_FMT_SGBRG12:
+	case V4L2_PIX_FMT_SGRBG12:
+	case V4L2_PIX_FMT_SRGGB12:
+	case V4L2_PIX_FMT_SBGGR14:
+	case V4L2_PIX_FMT_SGBRG14:
+	case V4L2_PIX_FMT_SGRBG14:
+	case V4L2_PIX_FMT_SRGGB14:
 	case V4L2_PIX_FMT_SBGGR16:
 	case V4L2_PIX_FMT_SGBRG16:
 	case V4L2_PIX_FMT_SGRBG16:
-- 
2.25.1