[PATCH] arm64: dts: meson-sm1-odroid: fix boot loop after reboot

[Neil Armstrong]

Hi,

On 28/01/2022 20:31, Lutz Koschorreck wrote:
> Since the correct gpio pin is used for enabling tf-io regulator the
> system did not boot correctly after calling reboot.
> 
> [   36.862443] reboot: Restarting system
> bl31 reboot reason: 0xd
> bl31 reboot reason: 0x0
> system cmd  1.
> SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0;
> bl2_stage_init 0x01
> bl2_stage_init 0x81
> hw id:▒SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:2;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:3;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:4;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:5;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;
> 
> Setting the gpio to open drain solves the issue.
> 

Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator")

> Signed-off-by: Lutz Koschorreck <theleks at ko-hh.de>
> ---
>   arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index ed7cd5f53046..ddb1b345397f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
>   		regulator-max-microvolt = <3300000>;
>   		vin-supply = <&vcc_5v>;
>   
> -		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
> +		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
>   		enable-active-high;
>   		regulator-always-on;
>   

Reviewed-by: Neil Armstrong <narmstrong at baylibre.com>