[RFC PATCH v4 10/12] media: imx219: use a local v4l2_subdev to simplify reading

Jean-Michel Hautbois jeanmichel.hautbois at ideasonboard.com
Thu Feb 3 09:50:07 PST 2022


There is no need to dereference the imx219 structure. Use a local
v4l2_subdev instead.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois at ideasonboard.com>
---
 drivers/media/i2c/imx219.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 7d29cf2b06f8..7c224d007f3e 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -1492,6 +1492,7 @@ static int imx219_check_hwcfg(struct device *dev)
 static int imx219_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
+	struct v4l2_subdev *sd;
 	struct imx219 *imx219;
 	int ret;
 
@@ -1499,7 +1500,8 @@ static int imx219_probe(struct i2c_client *client)
 	if (!imx219)
 		return -ENOMEM;
 
-	v4l2_i2c_subdev_init(&imx219->sd, client, &imx219_subdev_ops);
+	sd = &imx219->sd;
+	v4l2_i2c_subdev_init(sd, client, &imx219_subdev_ops);
 
 	/* Check the hardware configuration in device tree */
 	if (imx219_check_hwcfg(dev))
@@ -1566,21 +1568,21 @@ static int imx219_probe(struct i2c_client *client)
 		goto error_power_off;
 
 	/* Initialize subdev */
-	imx219->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
-			    V4L2_SUBDEV_FL_HAS_EVENTS |
-			    V4L2_SUBDEV_FL_MULTIPLEXED;
-	imx219->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+		     V4L2_SUBDEV_FL_HAS_EVENTS |
+		     V4L2_SUBDEV_FL_MULTIPLEXED;
+	sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
 
 	/* Initialize source pad */
 	imx219->pad.flags = MEDIA_PAD_FL_SOURCE;
 
-	ret = media_entity_pads_init(&imx219->sd.entity, 1, &imx219->pad);
+	ret = media_entity_pads_init(&sd->entity, 1, &imx219->pad);
 	if (ret) {
 		dev_err(dev, "failed to init entity pads: %d\n", ret);
 		goto error_handler_free;
 	}
 
-	ret = v4l2_async_register_subdev_sensor(&imx219->sd);
+	ret = v4l2_async_register_subdev_sensor(sd);
 	if (ret < 0) {
 		dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
 		goto error_media_entity;
@@ -1594,7 +1596,7 @@ static int imx219_probe(struct i2c_client *client)
 	return 0;
 
 error_media_entity:
-	media_entity_cleanup(&imx219->sd.entity);
+	media_entity_cleanup(&sd->entity);
 
 error_handler_free:
 	imx219_free_controls(imx219);
-- 
2.32.0




More information about the linux-arm-kernel mailing list