[PATCH RFC net-next 5/7] net: dsa: mt7530: RGMII can support 1000base-X

[Russell King (Oracle)]

When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000baseX connections. Therefore, it
makes no sense to exclude this from the linkmodes permitted for mt7531
port 5, so allow 1000baseX.

Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
 drivers/net/dsa/mt7530.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index cbdf4a58e507..a2fa629cccc0 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2523,9 +2523,6 @@ static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port,
 	 */
 	switch (port) {
 	case 5:
-		if (mt7531_is_rgmii_port(priv, port))
-			break;
-		fallthrough;
 	case 6:
 		if (interface == PHY_INTERFACE_MODE_2500BASEX) {
 			phylink_set(supported, 2500baseX_Full);
-- 
2.30.2