[PATCH 07/16] ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0-of7

[Erwan Le Ray]

DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp1-microdev2.0-of7 board device tree
to keep console in irq mode, as DMA support for console has been
removed from the driver by commit e359b4411c28 ("serial: stm32: fix
threaded interrupt handling").
Delete also uart8 DMA property to keep current behavior.

Signed-off-by: Erwan Le Ray <erwan.leray at foss.st.com>

diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
index 5670b23812a2..fae656edd820 100644
--- a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dts
@@ -143,6 +143,8 @@
 	pinctrl-0 = <&uart4_pins_a>;
 	pinctrl-1 = <&uart4_sleep_pins_a>;
 	pinctrl-2 = <&uart4_idle_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
 
@@ -150,5 +152,7 @@
 &uart8 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart8_pins_a>;
+	/delete-property/dmas;
+	/delete-property/dma-names;
 	status = "okay";
 };
-- 
2.17.1