[PATCH] drm/exynos: fimd: add BGR support for exynos4/5
Inki Dae
inki.dae at samsung.com
Wed Feb 2 18:57:12 PST 2022
Hi Martin.
Thanks for your contribution,
Inki Dae
22. 1. 30. 07:01에 Martin Jücker 이(가) 쓴 글:
> In the downstream kernels for exynos4 and exynos5 devices, there is an
> undocumented register that controls the order of the RGB output. It can
> be set to either normal order or reversed, which enables BGR support for
> those SoCs.
>
> This patch enables the BGR support for all the SoCs that were found to
> have at least one device with this logic in the corresponding downstream
> kernels.
>
> Signed-off-by: Martin Jücker <martin.juecker at gmail.com>
> ---
> drivers/gpu/drm/exynos/exynos_drm_fimd.c | 42 ++++++++++++++++++++++--
> include/video/samsung_fimd.h | 4 +++
> 2 files changed, 44 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> index c735e53939d8..cb632360c968 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
> @@ -109,6 +109,7 @@ struct fimd_driver_data {
> unsigned int has_dp_clk:1;
> unsigned int has_hw_trigger:1;
> unsigned int has_trigger_per_te:1;
> + unsigned int has_bgr_support:1;
> };
>
> static struct fimd_driver_data s3c64xx_fimd_driver_data = {
> @@ -138,6 +139,7 @@ static struct fimd_driver_data exynos4_fimd_driver_data = {
> .lcdblk_bypass_shift = 1,
> .has_shadowcon = 1,
> .has_vtsel = 1,
> + .has_bgr_support = 1,
> };
>
> static struct fimd_driver_data exynos5_fimd_driver_data = {
> @@ -149,6 +151,7 @@ static struct fimd_driver_data exynos5_fimd_driver_data = {
> .has_vidoutcon = 1,
> .has_vtsel = 1,
> .has_dp_clk = 1,
> + .has_bgr_support = 1,
> };
>
> static struct fimd_driver_data exynos5420_fimd_driver_data = {
> @@ -162,6 +165,7 @@ static struct fimd_driver_data exynos5420_fimd_driver_data = {
> .has_vtsel = 1,
> .has_mic_bypass = 1,
> .has_dp_clk = 1,
> + .has_bgr_support = 1,
> };
>
> struct fimd_context {
> @@ -226,6 +230,18 @@ static const uint32_t fimd_formats[] = {
> DRM_FORMAT_ARGB8888,
> };
>
> +static const uint32_t fimd_extended_formats[] = {
> + DRM_FORMAT_C8,
> + DRM_FORMAT_XRGB1555,
> + DRM_FORMAT_XBGR1555,
> + DRM_FORMAT_RGB565,
> + DRM_FORMAT_BGR565,
> + DRM_FORMAT_XRGB8888,
> + DRM_FORMAT_XBGR8888,
> + DRM_FORMAT_ARGB8888,
> + DRM_FORMAT_ABGR8888,
> +};
> +
> static const unsigned int capabilities[WINDOWS_NR] = {
> 0,
> EXYNOS_DRM_PLANE_CAP_WIN_BLEND | EXYNOS_DRM_PLANE_CAP_PIX_BLEND,
> @@ -673,21 +689,25 @@ static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
> val |= WINCONx_BYTSWP;
> break;
> case DRM_FORMAT_XRGB1555:
> + case DRM_FORMAT_XBGR1555:
> val |= WINCON0_BPPMODE_16BPP_1555;
> val |= WINCONx_HAWSWP;
> val |= WINCONx_BURSTLEN_16WORD;
> break;
> case DRM_FORMAT_RGB565:
> + case DRM_FORMAT_BGR565:
> val |= WINCON0_BPPMODE_16BPP_565;
> val |= WINCONx_HAWSWP;
> val |= WINCONx_BURSTLEN_16WORD;
> break;
> case DRM_FORMAT_XRGB8888:
> + case DRM_FORMAT_XBGR8888:
> val |= WINCON0_BPPMODE_24BPP_888;
> val |= WINCONx_WSWP;
> val |= WINCONx_BURSTLEN_16WORD;
> break;
> case DRM_FORMAT_ARGB8888:
> + case DRM_FORMAT_ABGR8888:
> default:
> val |= WINCON1_BPPMODE_25BPP_A1888;
> val |= WINCONx_WSWP;
> @@ -695,6 +715,18 @@ static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
> break;
> }
>
> + switch (pixel_format) {
> + case DRM_FORMAT_XBGR1555:
> + case DRM_FORMAT_XBGR8888:
> + case DRM_FORMAT_ABGR8888:
> + case DRM_FORMAT_BGR565:
> + writel(WIN_RGB_ORDER_REVERSE, ctx->regs + WIN_RGB_ORDER(win));
> + break;
> + default:
> + writel(WIN_RGB_ORDER_FORWARD, ctx->regs + WIN_RGB_ORDER(win));
> + break;
> + }
> +
> /*
> * Setting dma-burst to 16Word causes permanent tearing for very small
> * buffers, e.g. cursor buffer. Burst Mode switching which based on
> @@ -1074,8 +1106,14 @@ static int fimd_bind(struct device *dev, struct device *master, void *data)
> ctx->drm_dev = drm_dev;
>
> for (i = 0; i < WINDOWS_NR; i++) {
> - ctx->configs[i].pixel_formats = fimd_formats;
> - ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats);
> + if (ctx->driver_data->has_bgr_support) {
> + ctx->configs[i].pixel_formats = fimd_extended_formats;
> + ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_extended_formats);
> + } else {
> + ctx->configs[i].pixel_formats = fimd_formats;
> + ctx->configs[i].num_pixel_formats = ARRAY_SIZE(fimd_formats);
> + }
> +
> ctx->configs[i].zpos = i;
> ctx->configs[i].type = fimd_win_types[i];
> ctx->configs[i].capabilities = capabilities[i];
> diff --git a/include/video/samsung_fimd.h b/include/video/samsung_fimd.h
> index c4a93ce1de48..e6966d187591 100644
> --- a/include/video/samsung_fimd.h
> +++ b/include/video/samsung_fimd.h
> @@ -476,6 +476,10 @@
> * 1111 -none- -none- -none- -none- -none-
> */
>
> +#define WIN_RGB_ORDER(_win) (0x2020 + ((_win) * 4))
> +#define WIN_RGB_ORDER_FORWARD (0 << 11)
> +#define WIN_RGB_ORDER_REVERSE (1 << 11)
> +
> /* FIMD Version 8 register offset definitions */
> #define FIMD_V8_VIDTCON0 0x20010
> #define FIMD_V8_VIDTCON1 0x20014
More information about the linux-arm-kernel
mailing list