[PATCH] drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()

[Christoph Niedermaier]

If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit fe141cedc433 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.

Fixes: fe141cedc433 ("drm/imx: pd: Use bus format/flags provided by the bridge when available")
Signed-off-by: Christoph Niedermaier <cniedermaier at dh-electronics.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Philipp Zabel <p.zabel at pengutronix.de>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: linux-arm-kernel at lists.infradead.org
To: dri-devel at lists.freedesktop.org
---
 drivers/gpu/drm/imx/parallel-display.c | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/drivers/gpu/drm/imx/parallel-display.c b/drivers/gpu/drm/imx/parallel-display.c
index a8aba0141ce7..06cb1a59b9bc 100644
--- a/drivers/gpu/drm/imx/parallel-display.c
+++ b/drivers/gpu/drm/imx/parallel-display.c
@@ -217,14 +217,6 @@ static int imx_pd_bridge_atomic_check(struct drm_bridge *bridge,
 	if (!imx_pd_format_supported(bus_fmt))
 		return -EINVAL;
 
-	if (bus_flags &
-	    ~(DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_DE_HIGH |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE |
-	      DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE)) {
-		dev_warn(imxpd->dev, "invalid bus_flags (%x)\n", bus_flags);
-		return -EINVAL;
-	}
-
 	bridge_state->output_bus_cfg.flags = bus_flags;
 	bridge_state->input_bus_cfg.flags = bus_flags;
 	imx_crtc_state->bus_flags = bus_flags;
-- 
2.11.0