[PATCH] dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas
Marco Felsch
m.felsch at pengutronix.de
Fri Dec 23 00:39:40 PST 2022
Hi Peng,
On 22-12-23, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> The i.MX8MM/N/P/Q IOMUXC schemas are basically the same, it does not to
> have four schemas for almost the same binding.
Nice, just two nits see below.
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> ...mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} | 16 ++--
> .../bindings/pinctrl/fsl,imx8mn-pinctrl.yaml | 84 -------------------
> .../bindings/pinctrl/fsl,imx8mp-pinctrl.yaml | 84 -------------------
> .../bindings/pinctrl/fsl,imx8mq-pinctrl.yaml | 84 -------------------
> 4 files changed, 10 insertions(+), 258 deletions(-)
> rename Documentation/devicetree/bindings/pinctrl/{fsl,imx8mm-pinctrl.yaml => fsl,imx8m-pinctrl.yaml} (82%)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> similarity index 82%
> rename from Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> rename to Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> index 6717f163390b..949d962a97b4 100644
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8m-pinctrl.yaml
> @@ -1,13 +1,13 @@
> # SPDX-License-Identifier: GPL-2.0
> %YAML 1.2
> ---
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mm-pinctrl.yaml#
> +$id: http://devicetree.org/schemas/pinctrl/fsl,imx8m-pinctrl.yaml#
> $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> -title: Freescale IMX8MM IOMUX Controller
> +title: Freescale IMX8M IOMUX Controller
>
> maintainers:
> - - Anson Huang <Anson.Huang at nxp.com>
> + - Peng Fan <peng.fan at nxp.com>
>
> description:
> Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> @@ -15,7 +15,11 @@ description:
>
> properties:
> compatible:
> - const: fsl,imx8mm-iomuxc
> + enum:
> + - fsl,imx8mm-iomuxc
> + - fsl,imx8mn-iomuxc
> + - fsl,imx8mp-iomuxc
> + - fsl,imx8mq-iomuxc
>
> reg:
> maxItems: 1
> @@ -34,9 +38,9 @@ patternProperties:
> each entry consists of 6 integers and represents the mux and config
> setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> - be found in <arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h>. The last
> + be found in <arch/arm64/boot/dts/freescale/imx8m[m,n,p,q]-pinfunc.h>. The last
> integer CONFIG is the pad setting value like pull-up on this pin. Please
> - refer to i.MX8M Mini Reference Manual for detailed CONFIG settings.
> + refer to i.MX8M Quad/Mini/Nano/Plus Reference Manual for detailed CONFIG settings.
^
duplicated whitespace and the line
looks rather long. Are these 80chars?
Regards,
Marco
> $ref: /schemas/types.yaml#/definitions/uint32-matrix
> items:
> items:
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
> deleted file mode 100644
> index b1cdbb56d4e4..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mn-pinctrl.yaml
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mn-pinctrl.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Freescale IMX8MN IOMUX Controller
> -
> -maintainers:
> - - Anson Huang <Anson.Huang at nxp.com>
> -
> -description:
> - Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> - for common binding part and usage.
> -
> -properties:
> - compatible:
> - const: fsl,imx8mn-iomuxc
> -
> - reg:
> - maxItems: 1
> -
> -# Client device subnode's properties
> -patternProperties:
> - 'grp$':
> - type: object
> - description:
> - Pinctrl node's client devices use subnodes for desired pin configuration.
> - Client device subnodes use below standard properties.
> -
> - properties:
> - fsl,pins:
> - description:
> - each entry consists of 6 integers and represents the mux and config
> - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> - mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> - be found in <arch/arm64/boot/dts/freescale/imx8mn-pinfunc.h>. The last
> - integer CONFIG is the pad setting value like pull-up on this pin. Please
> - refer to i.MX8M Nano Reference Manual for detailed CONFIG settings.
> - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> - items:
> - items:
> - - description: |
> - "mux_reg" indicates the offset of mux register.
> - - description: |
> - "conf_reg" indicates the offset of pad configuration register.
> - - description: |
> - "input_reg" indicates the offset of select input register.
> - - description: |
> - "mux_val" indicates the mux value to be applied.
> - - description: |
> - "input_val" indicates the select input value to be applied.
> - - description: |
> - "pad_setting" indicates the pad configuration value to be applied.
> -
> - required:
> - - fsl,pins
> -
> - additionalProperties: false
> -
> -allOf:
> - - $ref: "pinctrl.yaml#"
> -
> -required:
> - - compatible
> - - reg
> -
> -additionalProperties: false
> -
> -examples:
> - # Pinmux controller node
> - - |
> - iomuxc: pinctrl at 30330000 {
> - compatible = "fsl,imx8mn-iomuxc";
> - reg = <0x30330000 0x10000>;
> -
> - pinctrl_uart2: uart2grp {
> - fsl,pins =
> - <0x23C 0x4A4 0x4FC 0x0 0x0 0x140>,
> - <0x240 0x4A8 0x000 0x0 0x0 0x140>;
> - };
> - };
> -
> -...
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> deleted file mode 100644
> index 4eed3a4e153a..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mp-pinctrl.yaml
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mp-pinctrl.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Freescale IMX8MP IOMUX Controller
> -
> -maintainers:
> - - Anson Huang <Anson.Huang at nxp.com>
> -
> -description:
> - Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> - for common binding part and usage.
> -
> -properties:
> - compatible:
> - const: fsl,imx8mp-iomuxc
> -
> - reg:
> - maxItems: 1
> -
> -# Client device subnode's properties
> -patternProperties:
> - 'grp$':
> - type: object
> - description:
> - Pinctrl node's client devices use subnodes for desired pin configuration.
> - Client device subnodes use below standard properties.
> -
> - properties:
> - fsl,pins:
> - description:
> - each entry consists of 6 integers and represents the mux and config
> - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> - mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> - be found in <arch/arm64/boot/dts/freescale/imx8mp-pinfunc.h>. The last
> - integer CONFIG is the pad setting value like pull-up on this pin. Please
> - refer to i.MX8M Plus Reference Manual for detailed CONFIG settings.
> - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> - items:
> - items:
> - - description: |
> - "mux_reg" indicates the offset of mux register.
> - - description: |
> - "conf_reg" indicates the offset of pad configuration register.
> - - description: |
> - "input_reg" indicates the offset of select input register.
> - - description: |
> - "mux_val" indicates the mux value to be applied.
> - - description: |
> - "input_val" indicates the select input value to be applied.
> - - description: |
> - "pad_setting" indicates the pad configuration value to be applied.
> -
> - required:
> - - fsl,pins
> -
> - additionalProperties: false
> -
> -allOf:
> - - $ref: "pinctrl.yaml#"
> -
> -required:
> - - compatible
> - - reg
> -
> -additionalProperties: false
> -
> -examples:
> - # Pinmux controller node
> - - |
> - iomuxc: pinctrl at 30330000 {
> - compatible = "fsl,imx8mp-iomuxc";
> - reg = <0x30330000 0x10000>;
> -
> - pinctrl_uart2: uart2grp {
> - fsl,pins =
> - <0x228 0x488 0x5F0 0x0 0x6 0x49>,
> - <0x228 0x488 0x000 0x0 0x0 0x49>;
> - };
> - };
> -
> -...
> diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
> deleted file mode 100644
> index d4a8ea5551a5..000000000000
> --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mq-pinctrl.yaml
> +++ /dev/null
> @@ -1,84 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/pinctrl/fsl,imx8mq-pinctrl.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: Freescale IMX8MQ IOMUX Controller
> -
> -maintainers:
> - - Anson Huang <Anson.Huang at nxp.com>
> -
> -description:
> - Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
> - for common binding part and usage.
> -
> -properties:
> - compatible:
> - const: fsl,imx8mq-iomuxc
> -
> - reg:
> - maxItems: 1
> -
> -# Client device subnode's properties
> -patternProperties:
> - 'grp$':
> - type: object
> - description:
> - Pinctrl node's client devices use subnodes for desired pin configuration.
> - Client device subnodes use below standard properties.
> -
> - properties:
> - fsl,pins:
> - description:
> - each entry consists of 6 integers and represents the mux and config
> - setting for one pin. The first 5 integers <mux_reg conf_reg input_reg
> - mux_val input_val> are specified using a PIN_FUNC_ID macro, which can
> - be found in <arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h>. The last
> - integer CONFIG is the pad setting value like pull-up on this pin. Please
> - refer to i.MX8M Quad Reference Manual for detailed CONFIG settings.
> - $ref: /schemas/types.yaml#/definitions/uint32-matrix
> - items:
> - items:
> - - description: |
> - "mux_reg" indicates the offset of mux register.
> - - description: |
> - "conf_reg" indicates the offset of pad configuration register.
> - - description: |
> - "input_reg" indicates the offset of select input register.
> - - description: |
> - "mux_val" indicates the mux value to be applied.
> - - description: |
> - "input_val" indicates the select input value to be applied.
> - - description: |
> - "pad_setting" indicates the pad configuration value to be applied.
> -
> - required:
> - - fsl,pins
> -
> - additionalProperties: false
> -
> -allOf:
> - - $ref: "pinctrl.yaml#"
> -
> -required:
> - - compatible
> - - reg
> -
> -additionalProperties: false
> -
> -examples:
> - # Pinmux controller node
> - - |
> - iomuxc: pinctrl at 30330000 {
> - compatible = "fsl,imx8mq-iomuxc";
> - reg = <0x30330000 0x10000>;
> -
> - pinctrl_uart1: uart1grp {
> - fsl,pins =
> - <0x234 0x49C 0x4F4 0x0 0x0 0x49>,
> - <0x238 0x4A0 0x4F4 0x0 0x0 0x49>;
> - };
> - };
> -
> -...
> --
> 2.37.1
>
>
>
More information about the linux-arm-kernel
mailing list