[EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Krzysztof Kozlowski]

On 22/12/2022 12:53, Bhavya Kapoor wrote:
> 
> On 22/12/22 16:16, Krzysztof Kozlowski wrote:
>> On 22/12/2022 11:39, Bhavya Kapoor wrote:
>>> On 21/12/22 13:24, Krzysztof Kozlowski wrote:
>>>> On 21/12/2022 06:42, Bhavya Kapoor wrote:
>>>>> On 20/12/22 16:20, Krzysztof Kozlowski wrote:
>>>>>> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>>>>>>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>>>>>>> for 8 channel ADCs for J721s2 SoC.
>>>>>>>
>>>>>>> Signed-off-by: Bhavya Kapoor <b-kapoor at ti.com>
>>>>>>> ---
>>>>>>>     .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>>>>>>     .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>>>>>>     2 files changed, 55 insertions(+), 1 deletion(-)
>>>>>>>
>>>>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> index a7aa6cf08acd..67593aa69327 100644
>>>>>>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>>>>>>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>>>>>>     	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>>>>>>     	phys = <&transceiver2>;
>>>>>>>     };
>>>>>>> +
>>>>>>> +&tscadc0 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> +
>>>>>>> +&tscadc1 {
>>>>>>> +	status = "okay";
>>>>>>> +	adc {
>>>>>>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>>>>>>> +	};
>>>>>>> +};
>>>>>>> \ No newline at end of file
>>>>>> This is a friendly reminder during the review process.
>>>>>>
>>>>>> It seems my previous comments were not fully addressed. Maybe my
>>>>>> feedback got lost between the quotes, maybe you just forgot to apply it.
>>>>>> Please go back to the previous discussion and either implement all
>>>>>> requested changes or keep discussing them.
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>> Best regards,
>>>>>> Krzysztof
>>>>> Hi , I thought i did addressed the feedback since tscadc is just a
>>>>> wrapper node.
>>>>>
>>>>> The actual adc node is inside of tscadc node.
>>>> Read the feedback, from all emails.
>>>> Best regards,
>>>> Krzysztof
>>>
>>> Hi , i have gone through all earlier mails but can't find anything else.
>>> Can you point out again whats the issue.
>> "And this is a v2? Or resend? Or something else?"
>>
>> You miss proper versioning and changelog.
>>
>> Additionally - I commented just before error in your patch. You must fix
>> it, not ignore it, even though I did not point it out before.
>>
>> Best regards,
>> Krzysztof
> 
> Hi, i had replied to that as well earlier. You can check that out 
> https://lore.kernel.org/all/89ce3639-e979-e369-657a-20aea4295970@ti.com/ .

BTW, there is nothing there about the patch error I wrote here. If not,
please point me to the quote which addresses this patch error.

Best regards,
Krzysztof