[PATCH v2 1/2] dt-bindings: Add the binding doc for xilinx APM

[Shubhrajyoti Datta]

The LogiCORE IP AXI Performance Monitor core enables AXI system
performance measurement for multiple slots (AXI4/AXI3/
AXI4-Stream/AXI4-Lite) activity. Add the devicetree binding for
xilinx APM.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta at amd.com>

 
---

Changes in v2:
 - Use boolean for the values xlnx,enable-profile , xlnx,enable-trace
and xlnx,enable-event-count
- Update the file name
- use generic node name pmu

 .../bindings/perf/xlnx,axi-perf-monitor.yaml  | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml

diff --git a/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
new file mode 100644
index 000000000000..72843504c946
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/xlnx,axi-perf-monitor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Axi Performance Monitor
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta at amd.com>
+
+properties:
+  compatible:
+    const: xlnx,axi-perf-monitor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,profile:
+    description:
+      Has profile mode support. Event counting in profile mode consists of a
+      fixed number of accumulators for each AXI4/AXI3/AXI4-Lite slot. All the
+      events that can be counted are detected and given to the accumulator
+      which calculates the aggregate value. There is no selection of events,
+      and in this mode, event counting is done only on AXI4/AXI3/AXI4-Lite
+      monitor slots.
+    type: boolean
+
+  xlnx,trace:
+    description:
+      Has trace mode support. In trace mode, the APM provides event logging in a
+      reduced dynamic configuration. It captures the specified AXI events,
+      external events and the time stamp difference between two successive
+      events into the streaming FIFO. The selection of events to be captured
+      is set through parameter configuration. Streaming agents are not
+      supported in trace mode.
+    type: boolean
+
+  xlnx,num-monitor-slots:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of monitor slots.
+    minimum: 1
+    maximum: 8
+
+  xlnx,event-count:
+    description:
+      Has event counting capability..
+    type: boolean
+
+  xlnx,event-log:
+    type: boolean
+    description:
+      Has event logging support.
+
+  xlnx,have-sampled-metric-cnt:
+    type: boolean
+    description:
+      Sampled metric counters enabled in APM.
+
+  xlnx,metric-count-width:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [32, 64]
+    description:
+      Metric Counter width.
+
+  xlnx,metric-count-scale:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [1, 2, 4, 8]
+    description:
+      Metric Counter scale factor.
+
+  xlnx,num-of-counters:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of counters in APM.
+
+  xlnx,metrics-sample-count-width:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [32, 64]
+    description:
+      Sampled metric counter width.
+
+  xlnx,global-count-width:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [32, 64]
+    description:
+      Global Clock counter width.
+
+  xlnx,id-filter-32bit:
+    description: APM is in 32-bit mode.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmu at 44a00000 {
+        compatible = "xlnx,axi-perf-monitor";
+        interrupt-parent = <&axi_intc_1>;
+        interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
+        reg = <0x44a00000 0x1000>;
+        clocks = <&clkc 15>;
+        xlnx,num-monitor-slots = <4>;
+        xlnx,event-count;
+        xlnx,event-log;
+        xlnx,have-sampled-metric-cnt;
+        xlnx,num-of-counters = <8>;
+        xlnx,metric-count-width = <32>;
+        xlnx,metrics-sample-count-width = <32>;
+        xlnx,global-count-width = <32>;
+        xlnx,metric-count-scale = <1>;
+        xlnx,id-filter-32bit;
+    };
-- 
2.17.1