[PATCH] arm64: dts: imx8mp: Enable spba-bus on AIPS3
Marco Felsch
m.felsch at pengutronix.de
Wed Dec 21 06:45:34 PST 2022
Hi Adam,
On 22-12-18, Adam Ford wrote:
> There is an SPBA bus on AIPS3 which includes ecspi1-3,
> UART1-3, and Flexcan1-2 according to the TRM.
LGTM
> Signed-off-by: Adam Ford <aford173 at gmail.com>
Reviewed-by: Marco Felsch <m.felsch at pengutronix.de>
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 2ce45e7cbbdf..9b0a47e7b8fd 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -719,121 +719,129 @@ aips3: bus at 30800000 {
> #size-cells = <1>;
> ranges;
>
> - ecspi1: spi at 30820000 {
> + spba-bus at 30800000 {
> + compatible = "fsl,spba-bus", "simple-bus";
> + reg = <0x30800000 0x100000>;
> #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> - reg = <0x30820000 0x10000>;
> - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
> - <&clk IMX8MP_CLK_ECSPI1_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clock-rates = <80000000>;
> - assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + #size-cells = <1>;
> + ranges;
>
> - ecspi2: spi at 30830000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> - reg = <0x30830000 0x10000>;
> - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
> - <&clk IMX8MP_CLK_ECSPI2_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clock-rates = <80000000>;
> - assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi1: spi at 30820000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> + reg = <0x30820000 0x10000>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_ECSPI1_ROOT>,
> + <&clk IMX8MP_CLK_ECSPI1_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clock-rates = <80000000>;
> + assigned-clocks = <&clk IMX8MP_CLK_ECSPI1>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - ecspi3: spi at 30840000 {
> - #address-cells = <1>;
> - #size-cells = <0>;
> - compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> - reg = <0x30840000 0x10000>;
> - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
> - <&clk IMX8MP_CLK_ECSPI3_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clock-rates = <80000000>;
> - assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi2: spi at 30830000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> + reg = <0x30830000 0x10000>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_ECSPI2_ROOT>,
> + <&clk IMX8MP_CLK_ECSPI2_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clock-rates = <80000000>;
> + assigned-clocks = <&clk IMX8MP_CLK_ECSPI2>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart1: serial at 30860000 {
> - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> - reg = <0x30860000 0x10000>;
> - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
> - <&clk IMX8MP_CLK_UART1_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi3: spi at 30840000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "fsl,imx8mp-ecspi", "fsl,imx6ul-ecspi";
> + reg = <0x30840000 0x10000>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_ECSPI3_ROOT>,
> + <&clk IMX8MP_CLK_ECSPI3_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clock-rates = <80000000>;
> + assigned-clocks = <&clk IMX8MP_CLK_ECSPI3>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart3: serial at 30880000 {
> - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> - reg = <0x30880000 0x10000>;
> - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
> - <&clk IMX8MP_CLK_UART3_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + uart1: serial at 30860000 {
> + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> + reg = <0x30860000 0x10000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_UART1_ROOT>,
> + <&clk IMX8MP_CLK_UART1_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart2: serial at 30890000 {
> - compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> - reg = <0x30890000 0x10000>;
> - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
> - <&clk IMX8MP_CLK_UART2_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + uart3: serial at 30880000 {
> + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> + reg = <0x30880000 0x10000>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_UART3_ROOT>,
> + <&clk IMX8MP_CLK_UART3_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - flexcan1: can at 308c0000 {
> - compatible = "fsl,imx8mp-flexcan";
> - reg = <0x308c0000 0x10000>;
> - interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> - <&clk IMX8MP_CLK_CAN1_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> - assigned-clock-rates = <40000000>;
> - fsl,clk-source = /bits/ 8 <0>;
> - fsl,stop-mode = <&gpr 0x10 4>;
> - status = "disabled";
> - };
> + uart2: serial at 30890000 {
> + compatible = "fsl,imx8mp-uart", "fsl,imx6q-uart";
> + reg = <0x30890000 0x10000>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_UART2_ROOT>,
> + <&clk IMX8MP_CLK_UART2_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - flexcan2: can at 308d0000 {
> - compatible = "fsl,imx8mp-flexcan";
> - reg = <0x308d0000 0x10000>;
> - interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> - <&clk IMX8MP_CLK_CAN2_ROOT>;
> - clock-names = "ipg", "per";
> - assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
> - assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> - assigned-clock-rates = <40000000>;
> - fsl,clk-source = /bits/ 8 <0>;
> - fsl,stop-mode = <&gpr 0x10 5>;
> - status = "disabled";
> + flexcan1: can at 308c0000 {
> + compatible = "fsl,imx8mp-flexcan";
> + reg = <0x308c0000 0x10000>;
> + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> + <&clk IMX8MP_CLK_CAN1_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clocks = <&clk IMX8MP_CLK_CAN1>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> + assigned-clock-rates = <40000000>;
> + fsl,clk-source = /bits/ 8 <0>;
> + fsl,stop-mode = <&gpr 0x10 4>;
> + status = "disabled";
> + };
> +
> + flexcan2: can at 308d0000 {
> + compatible = "fsl,imx8mp-flexcan";
> + reg = <0x308d0000 0x10000>;
> + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
> + <&clk IMX8MP_CLK_CAN2_ROOT>;
> + clock-names = "ipg", "per";
> + assigned-clocks = <&clk IMX8MP_CLK_CAN2>;
> + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>;
> + assigned-clock-rates = <40000000>;
> + fsl,clk-source = /bits/ 8 <0>;
> + fsl,stop-mode = <&gpr 0x10 5>;
> + status = "disabled";
> + };
> };
>
> crypto: crypto at 30900000 {
> --
> 2.34.1
>
>
>
More information about the linux-arm-kernel
mailing list