[RESEND PATCH v4] arm64: dts: mt8195: Add Ethernet controller

[AngeloGioacchino Del Regno]

Il 21/12/22 03:25, Biao Huang ha scritto:
> Add Ethernet controller node for mt8195.
> 
> Signed-off-by: Biao Huang <biao.huang at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 88 ++++++++++++++++++++
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi     | 86 +++++++++++++++++++
>   2 files changed, 174 insertions(+)
> 

..snip..

> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 5d31536f4c48..02112bbf2bdf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1046,6 +1046,92 @@ spis1: spi at 1101e000 {
>   			status = "disabled";
>   		};
>   
> +		eth: ethernet at 11021000 {
> +			compatible = "mediatek,mt8195-gmac", "snps,dwmac-5.10a";
> +			reg = <0 0x11021000 0 0x4000>;
> +			interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
> +			interrupt-names = "macirq";
> +			clock-names = "axi",
> +				      "apb",
> +				      "mac_cg",

mac_cg goes as last clock, as specified in the binding.

Order: axi, apb, mac_main, ptp_ref, rmii_internal, mac_cg.

Please fix.

Regards,
Angelo

> +				      "mac_main",
> +				      "ptp_ref",
> +				      "rmii_internal";
> +			clocks = <&pericfg_ao CLK_PERI_AO_ETHERNET>,
> +				 <&pericfg_ao CLK_PERI_AO_ETHERNET_BUS>,
> +				 <&pericfg_ao CLK_PERI_AO_ETHERNET_MAC>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_250M>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_62P4M_PTP>,
> +				 <&topckgen CLK_TOP_SNPS_ETH_50M_RMII>;