[EXTERNAL] Re: [PATCH] arm64: dts: ti: k3-j721s2: Add support for ADC nodes

[Bhavya Kapoor]

On 20/12/22 16:20, Krzysztof Kozlowski wrote:
> On 20/12/2022 11:12, Bhavya Kapoor wrote:
>> J721s2 has two instances of 8 channel ADCs in MCU domain. Add DT nodes
>> for 8 channel ADCs for J721s2 SoC.
>>
>> Signed-off-by: Bhavya Kapoor <b-kapoor at ti.com>
>> ---
>>   .../dts/ti/k3-j721s2-common-proc-board.dts    | 14 +++++++
>>   .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     | 42 ++++++++++++++++++-
>>   2 files changed, 55 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> index a7aa6cf08acd..67593aa69327 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
>> @@ -309,3 +309,17 @@ &mcu_mcan1 {
>>   	pinctrl-0 = <&mcu_mcan1_pins_default>;
>>   	phys = <&transceiver2>;
>>   };
>> +
>> +&tscadc0 {
>> +	status = "okay";
>> +	adc {
>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> +	};
>> +};
>> +
>> +&tscadc1 {
>> +	status = "okay";
>> +	adc {
>> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
>> +	};
>> +};
>> \ No newline at end of file
> This is a friendly reminder during the review process.
>
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all
> requested changes or keep discussing them.
>
> Thank you.
>
> Best regards,
> Krzysztof

Hi , I thought i did addressed the feedback since tscadc is just a 
wrapper node.

The actual adc node is inside of tscadc node.