[PATCH v1 4/9] media: verisilicon: Check AV1 bitstreams bit depth

[Benjamin Gaignard]

Le 19/12/2022 à 21:38, Nicolas Dufresne a écrit :
> Le lundi 19 décembre 2022 à 16:56 +0100, Benjamin Gaignard a écrit :
>> The driver supports 8 and 10 bits bitstreams, make sure to discard
>> other cases.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard at collabora.com>
>> ---
>>   drivers/media/platform/verisilicon/hantro_drv.c | 6 ++++++
>>   1 file changed, 6 insertions(+)
>>
>> diff --git a/drivers/media/platform/verisilicon/hantro_drv.c b/drivers/media/platform/verisilicon/hantro_drv.c
>> index 8e93710dcfed..e10fc59634dd 100644
>> --- a/drivers/media/platform/verisilicon/hantro_drv.c
>> +++ b/drivers/media/platform/verisilicon/hantro_drv.c
>> @@ -282,7 +282,13 @@ static int hantro_try_ctrl(struct v4l2_ctrl *ctrl)
>>   		/* We only support profile 0 */
>>   		if (dec_params->profile != 0)
>>   			return -EINVAL;
>> +	} else if (ctrl->id == V4L2_CID_STATELESS_AV1_SEQUENCE) {
>> +		const struct v4l2_ctrl_av1_sequence *sequence = ctrl->p_new.p_av1_sequence;
>> +
>> +		if (sequence->bit_depth != 8 && sequence->bit_depth != 10)
>> +			return -EINVAL;
> As you state in the cover letter, should this just be this for now ?

The driver can decode 8 or 10 bits bitstreams but will on produce 8bits (NV12_4L4 or NV12)
frames. The hardware is able to truncate 10bits bitstreams to 8 bits output.

>
>
>> +		if (sequence->bit_depth != 8)
>> +			return -EINVAL;
>
>>   	}
>> +
>>   	return 0;
>>   }
>>