[PATCH v3 2/5] soc: imx: add Kconfig symbols for blk-ctrl drivers

[Lucas Stach]

Currently the dependencies of the blk-ctrl drivers are not fully
described in Kconfig, which can trip over the compile tests on
platforms where those drivers are not usually enabled. Add a
non user-selectable symbol to be describe those dependencies.

Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
v3: new patch
---
 drivers/soc/imx/Kconfig  | 10 ++++++++++
 drivers/soc/imx/Makefile |  6 +++---
 2 files changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
index 4b906791d6c7..179bcc896ea2 100644
--- a/drivers/soc/imx/Kconfig
+++ b/drivers/soc/imx/Kconfig
@@ -28,4 +28,14 @@ config SOC_IMX9
 	help
 	  If you say yes here, you get support for the NXP i.MX9 family
 
+config IMX8M_BLK_CTRL
+	bool
+	default SOC_IMX8M && IMX_GPCV2_PM_DOMAINS
+	depends on PM_GENERIC_DOMAINS
+
+config IMX9_BLK_CTRL
+	bool
+	default SOC_IMX9 && IMX_GPCV2_PM_DOMAINS
+	depends on PM_GENERIC_DOMAINS
+
 endmenu
diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
index 7b4099ceafd6..a28c44a1f16a 100644
--- a/drivers/soc/imx/Makefile
+++ b/drivers/soc/imx/Makefile
@@ -5,7 +5,7 @@ endif
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
 obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
-obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
-obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
+obj-$(CONFIG_IMX8M_BLK_CTRL) += imx8m-blk-ctrl.o
+obj-$(CONFIG_IMX8M_BLK_CTRL) += imx8mp-blk-ctrl.o
 obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
-obj-$(CONFIG_SOC_IMX9) += imx93-blk-ctrl.o
+obj-$(CONFIG_IMX9_BLK_CTRL) += imx93-blk-ctrl.o
-- 
2.30.2