[PATCH v3 07/17] dt-bindings: phy: Fix node descriptions in uniphier-phy example

Kunihiko Hayashi hayashi.kunihiko at socionext.com
Tue Dec 13 00:24:39 PST 2022


Prior to adding dt-bindings for SoC-dependent controllers, rename the
phy nodes and their parent nodes to the generic names in the example.

And drop parent nodes of each phy as they are not directly necessary here.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
---
 .../phy/socionext,uniphier-ahci-phy.yaml      | 24 ++++-------
 .../phy/socionext,uniphier-usb2-phy.yaml      | 41 ++++++++-----------
 .../phy/socionext,uniphier-usb3hs-phy.yaml    | 29 +++++--------
 .../phy/socionext,uniphier-usb3ss-phy.yaml    | 26 ++++--------
 4 files changed, 46 insertions(+), 74 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
index a3cd45acea28..de3cffc850bc 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-ahci-phy.yaml
@@ -117,20 +117,12 @@ additionalProperties: false
 
 examples:
   - |
-    ahci-glue at 65700000 {
-        compatible = "socionext,uniphier-pxs3-ahci-glue",
-                     "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65700000 0x100>;
-
-        ahci_phy: phy at 10 {
-            compatible = "socionext,uniphier-pxs3-ahci-phy";
-            reg = <0x10 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 28>, <&sys_clk 30>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 28>, <&sys_rst 30>;
-        };
+    ahci_phy: phy at 10 {
+        compatible = "socionext,uniphier-pxs3-ahci-phy";
+        reg = <0x10 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 28>, <&sys_clk 30>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 28>, <&sys_rst 30>;
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
index 63dab914a48d..19522c54f448 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
@@ -61,28 +61,23 @@ examples:
   - |
     // The UniPhier usb2-phy should be a subnode of a "syscon" compatible node.
 
-    soc-glue at 5f800000 {
-        compatible = "socionext,uniphier-ld11-soc-glue", "simple-mfd", "syscon";
-        reg = <0x5f800000 0x2000>;
-
-        usb-controller {
-            compatible = "socionext,uniphier-ld11-usb2-phy";
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            usb_phy0: phy at 0 {
-                reg = <0>;
-                #phy-cells = <0>;
-            };
-
-            usb_phy1: phy at 1 {
-                reg = <1>;
-                #phy-cells = <0>;
-            };
-
-            usb_phy2: phy at 2 {
-                reg = <2>;
-                #phy-cells = <0>;
-            };
+    usb-hub {
+        compatible = "socionext,uniphier-ld11-usb2-phy";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        usb_phy0: phy at 0 {
+            reg = <0>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy1: phy at 1 {
+            reg = <1>;
+            #phy-cells = <0>;
+        };
+
+        usb_phy2: phy at 2 {
+            reg = <2>;
+            #phy-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index 21e4414eea60..2107d98ace15 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -146,22 +146,15 @@ additionalProperties: false
 
 examples:
   - |
-    usb-glue at 65b00000 {
-        compatible = "socionext,uniphier-ld20-dwc3-glue", "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_hsphy0: hs-phy at 200 {
-            compatible = "socionext,uniphier-ld20-usb3-hsphy";
-            reg = <0x200 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 14>, <&sys_clk 16>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 14>, <&sys_rst 16>;
-            vbus-supply = <&usb_vbus0>;
-            nvmem-cell-names = "rterm", "sel_t", "hs_i";
-            nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
-        };
+    usb_hsphy0: phy at 200 {
+        compatible = "socionext,uniphier-ld20-usb3-hsphy";
+        reg = <0x200 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
+        nvmem-cell-names = "rterm", "sel_t", "hs_i";
+        nvmem-cells = <&usb_rterm0>, <&usb_sel_t0>, <&usb_hs_i0>;
     };
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
index 4c26d2d2303d..8f5aa6238bf3 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3ss-phy.yaml
@@ -131,21 +131,13 @@ additionalProperties: false
 
 examples:
   - |
-    usb-glue at 65b00000 {
-        compatible = "socionext,uniphier-ld20-dwc3-glue",
-                     "simple-mfd";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0 0x65b00000 0x400>;
-
-        usb_ssphy0: ss-phy at 300 {
-            compatible = "socionext,uniphier-ld20-usb3-ssphy";
-            reg = <0x300 0x10>;
-            #phy-cells = <0>;
-            clock-names = "link", "phy";
-            clocks = <&sys_clk 14>, <&sys_clk 16>;
-            reset-names = "link", "phy";
-            resets = <&sys_rst 14>, <&sys_rst 16>;
-            vbus-supply = <&usb_vbus0>;
-        };
+    usb_ssphy0: phy at 300 {
+        compatible = "socionext,uniphier-ld20-usb3-ssphy";
+        reg = <0x300 0x10>;
+        #phy-cells = <0>;
+        clock-names = "link", "phy";
+        clocks = <&sys_clk 14>, <&sys_clk 16>;
+        reset-names = "link", "phy";
+        resets = <&sys_rst 14>, <&sys_rst 16>;
+        vbus-supply = <&usb_vbus0>;
     };
-- 
2.25.1




More information about the linux-arm-kernel mailing list