[PATCH v2 01/16] dt-bindings: clock: Fix node descriptions in uniphier-clock example

Kunihiko Hayashi hayashi.kunihiko at socionext.com
Thu Dec 8 07:09:41 PST 2022


On 2022/12/08 17:06, Krzysztof Kozlowski wrote:
> On 07/12/2022 06:53, Kunihiko Hayashi wrote:
>> Prior to adding dt-bindings for SoC-dependent controllers, rename the
>> clock nodes their parent nodes to the generic names in the example.
>>
>> And also fix the missing compatible string.
>>
>> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
>> ---
>>   .../clock/socionext,uniphier-clock.yaml       | 21 +++++++++++--------
>>   1 file changed, 12 insertions(+), 9 deletions(-)
>>
>> diff --git
>> a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
>> b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
>> index 9a0cc7341630..672450a1ecda 100644
>> ---
>> a/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
>> +++
>> b/Documentation/devicetree/bindings/clock/socionext,uniphier-clock.yaml
>> @@ -61,11 +61,12 @@ required:
>>
>>   examples:
>>     - |
>> -    sysctrl at 61840000 {
>> -        compatible = "socionext,uniphier-sysctrl", "simple-mfd",
>> "syscon";
>> +    syscon at 61840000 {
>> +        compatible = "socionext,uniphier-ld11-sysctrl",
>> +                     "simple-mfd", "syscon";
>>           reg = <0x61840000 0x4000>;
>>
>> -        clock {
>> +        clock-controller {
>>               compatible = "socionext,uniphier-ld11-clock";
>>               #clock-cells = <1>;
>>           };
>> @@ -74,11 +75,12 @@ examples:
>>       };
>>
>>     - |
>> -    mioctrl at 59810000 {
>> -        compatible = "socionext,uniphier-mioctrl", "simple-mfd",
>> "syscon";
>> +    syscon at 59810000 {
>> +        compatible = "socionext,uniphier-ld11-mioctrl",
>> +                     "simple-mfd", "syscon";
>>           reg = <0x59810000 0x800>;
>>
>> -        clock {
>> +        clock-controller {
>>               compatible = "socionext,uniphier-ld11-mio-clock";
>>               #clock-cells = <1>;
>>           };
>> @@ -87,11 +89,12 @@ examples:
>>       };
>>
>>     - |
>> -    perictrl at 59820000 {
>> -        compatible = "socionext,uniphier-perictrl", "simple-mfd",
>> "syscon";
>> +    syscon at 59820000 {
>> +        compatible = "socionext,uniphier-ld11-perictrl",
>> +                     "simple-mfd", "syscon";
>>           reg = <0x59820000 0x200>;
>>
>> -        clock {
> 
> These are all three same examples (no differences except compatibles),
> so you can as well keep only one. You can also skip parent node,
> otherwise you might keep getting warnings for this schema. The parent is
> not that relevant here and its bindings (e.g.
> socionext,uniphier-sysctrl.yaml) should include complete example -
> parent with all the children.
I understand.
I'll keep one and drop the parent node from the example.

Thank you,

---
Best Regards
Kunihiko Hayashi



More information about the linux-arm-kernel mailing list