[PATCH net-next v3 4/4] net: lan966x: Add ptp trap rules

[Michael Walle]

Hi Horatiu,

> Currently lan966x, doesn't allow to run PTP over interfaces that are
> part of the bridge. The reason is when the lan966x was receiving a
> PTP frame (regardless if L2/IPv4/IPv6) the HW it would flood this
> frame.
> Now that it is possible to add VCAP rules to the HW, such to trap these
> frames to the CPU, it is possible to run PTP also over interfaces that
> are part of the bridge.

This gives me:

# /etc/init.d/S65ptp4l start
Starting linuxptp daemon: OK
[   44.136870] vcap_val_rule:1678: keyset was not updated: -22
[   44.140196] vcap_val_rule:1678: keyset was not updated: -22
#

# ptp4l -v
3.1.1
# uname -a
Linux buildroot 6.1.0-rc8-next-20221208+ #924 SMP Thu Dec  8 10:08:58 CET 2022 armv7l GNU/Linux

I don't know whats going on, but I'm happy to help with debugging with some
guidance.

-michael