[PATCH v2 09/16] dt-bindings: soc: socionext: Add UniPhier SoC-glue logic

[Rob Herring]

On Wed, Dec 07, 2022 at 02:53:58PM +0900, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the SoC-glue logic implemented on
> Socionext Uniphier SoCs.
> 
> This SoC-glue logic is a set of miscellaneous function registers
> handling signals for specific devices outside system components,
> and also has multiple functions such as I/O pinmux, usb-phy, debug,
> clock-mux for a specific SoC, and so on.
> 
> Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
> ---
>  .../socionext,uniphier-soc-glue.yaml          | 113 ++++++++++++++++++
>  1 file changed, 113 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
> 
> diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
> new file mode 100644
> index 000000000000..6fc790963660
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-soc-glue.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-soc-glue.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Socionext UniPhier SoC-glue logic
> +
> +maintainers:
> +  - Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
> +
> +description: |+
> +  SoC-glue logic implemented on Socionext UniPhier SoCs is a collection of
> +  miscellaneous function registers handling signals outside system components.
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - socionext,uniphier-ld4-soc-glue
> +          - socionext,uniphier-pro4-soc-glue
> +          - socionext,uniphier-pro5-soc-glue
> +          - socionext,uniphier-pxs2-soc-glue
> +          - socionext,uniphier-sld8-soc-glue
> +          - socionext,uniphier-ld11-soc-glue
> +          - socionext,uniphier-ld20-soc-glue
> +          - socionext,uniphier-pxs3-soc-glue
> +          - socionext,uniphier-nx1-soc-glue
> +      - const: simple-mfd
> +      - const: syscon
> +
> +  reg:
> +    maxItems: 1
> +
> +patternProperties:
> +  "^pinctrl(@[0-9a-f]+)?$":
> +    $ref: /schemas/pinctrl/socionext,uniphier-pinctrl.yaml#
> +
> +  "^usb-hub(@[0-9a-f]+)?$":
> +    $ref: /schemas/phy/socionext,uniphier-usb2-phy.yaml#
> +
> +  "^clock-controller(@[0-9a-f]+)?$":
> +    $ref: /schemas/clock/socionext,uniphier-clock.yaml#
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - socionext,uniphier-pro4-soc-glue
> +              - socionext,uniphier-ld11-soc-glue
> +    else:
> +      patternProperties:
> +        "^usb-hub(@[0-9a-f]+)?$": false

While just if and else is valid json-schema, we require 'then'. Can you 
change this to 'if: { not: {...}, then: {}'.

You should be getting a warning for this. The rest of the warnings from 
the bot look like false positives you can ignore.

Rob