[PATCH v3 6/9] arm64: dts: allwinner: fix touchscreen reset GPIO polarity

Samuel Holland samuel at sholland.org
Mon Dec 5 16:26:02 PST 2022


Hi Quentin,

On 12/5/22 07:40, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
> 
> The reset line is active low for the Goodix touchscreen controller so
> let's fix the polarity in the Device Tree node.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts       | 2 +-
>  arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts | 2 +-
>  arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi          | 2 +-
>  arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts             | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> index 8233582f62881..5fd581037d987 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
> @@ -122,7 +122,7 @@ touchscreen at 5d {
>  		interrupt-parent = <&pio>;
>  		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
>  		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
> -		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH8 */
> +		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>;	/* CTP-RST: PH8 */

You are changing the DT binding here, in a way that breaks backward
compatibility with existing devicetrees. NACK.

Regards,
Samuel

>  		touchscreen-inverted-x;
>  		touchscreen-inverted-y;
>  	};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
> index 577f9e1d08a14..990f042f5a5b1 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts
> @@ -45,7 +45,7 @@ touchscreen at 5d {
>  		interrupt-parent = <&pio>;
>  		interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>;
>  		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>;	/* CTP-INT: PH4 */
> -		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>;	/* CTP-RST: PH11 */
> +		reset-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>;	/* CTP-RST: PH11 */
>  		touchscreen-inverted-x;
>  		touchscreen-inverted-y;
>  	};
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> index 87847116ab6d9..97359cc7f13e2 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
> @@ -167,7 +167,7 @@ touchscreen at 5d {
>  		interrupt-parent = <&pio>;
>  		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
>  		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> -		reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
> +		reset-gpios = <&pio 7 11 GPIO_ACTIVE_LOW>; /* PH11 */
>  		AVDD28-supply = <&reg_ldo_io0>;
>  		VDDIO-supply = <&reg_ldo_io0>;
>  		touchscreen-size-x = <720>;
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
> index 0a5607f73049e..c0eccc753e3f5 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
> @@ -189,7 +189,7 @@ touchscreen at 5d {
>  		interrupt-parent = <&pio>;
>  		interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */
>  		irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
> -		reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
> +		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
>  		AVDD28-supply = <&reg_ldo_io1>;
>  	};
>  };
> 




More information about the linux-arm-kernel mailing list