[PATCH 4/5] clk: sunxi-ng: d1: Mark cpux clock as critical

[Andre Przywara]

On Sat, 26 Nov 2022 13:13:18 -0600
Samuel Holland <samuel at sholland.org> wrote:

> From: András Szemző <szemzo.andras at gmail.com>
> 
> Some SoCs in the D1 family feature ARM CPUs instead of a RISC-V CPU.
> In that case, the CPUs are driven from the 'cpux' clock, so it needs
> to be marked as critical.

Yes, my board hangs without that patch somewhere into the boot, and
this patch fixes it.

Can you also explain in the commit message why this is needed? IIRC
the CPU node itself does not "consume" the clock, this would only be
done by DVFS code?
And it might be worth noting that we do this for every other
Allwinner SoC as well.

> Signed-off-by: András Szemző <szemzo.andras at gmail.com>
> Signed-off-by: Samuel Holland <samuel at sholland.org>

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
> 
>  drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> index 8ef3cdeb7962..c5a7df93602c 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun20i-d1.c
> @@ -240,7 +240,7 @@ static const struct clk_parent_data cpux_parents[] = {
>  	{ .hw = &pll_periph0_800M_clk.common.hw },
>  };
>  static SUNXI_CCU_MUX_DATA(cpux_clk, "cpux", cpux_parents,
> -			  0x500, 24, 3, CLK_SET_RATE_PARENT);
> +			  0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
>  
>  static const struct clk_hw *cpux_hws[] = { &cpux_clk.common.hw };
>  static SUNXI_CCU_M_HWS(cpux_axi_clk, "cpux-axi",