[PATCH v2 0/6] Rongpin RP-H6B support (and support for GL850G)

Icenowy Zheng uwu at icenowy.me
Fri Dec 2 00:16:41 PST 2022


This patchset adds support for Rongpin RP-H6B, and as a dependency,
power sequence support for its onboard USB hub, GL850G.

The first 3 patches are for GL850G, adding a binding for it and adding
its support to onboard_usb_hub driver.

The last 3 patches are for RP-H6B, also 2 for adding a binding and 1 for
the real DT.

Icenowy Zheng (6):
  dt-bindings: vendor-prefixes: add Genesys Logic
  dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller
  usb: misc: onboard_usb_hub: add Genesys Logic GL850G hub support
  vendor-prefixes: Add Shenzhen Rongpin Electronics Co., Ltd
  dt-bindings: arm: sunxi: add Rongpin RP-H6B board
  arm64: dts: allwinner: h6: add Rongpin RP-H6C SoM and RP-H6B board

 .../devicetree/bindings/arm/sunxi.yaml        |   6 +
 .../bindings/usb/genesys,gl850g.yaml          |  47 ++++
 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm64/boot/dts/allwinner/Makefile        |   1 +
 .../boot/dts/allwinner/sun50i-h6-rp-h6b.dts   | 239 ++++++++++++++++++
 .../boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi  | 180 +++++++++++++
 drivers/usb/misc/onboard_usb_hub.c            |   2 +
 drivers/usb/misc/onboard_usb_hub.h            |   5 +
 8 files changed, 484 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6b.dts
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-rp-h6c.dtsi

-- 
2.38.1




More information about the linux-arm-kernel mailing list