Kernel Kernel bug caused by (cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()) on Banana Pi R64 (MT7622)

Thu Dec 1 07:26:54 PST 2022

On Thu, Dec 01, 2022 at 04:08:50PM +0100, Thorsten Leemhuis wrote:
> Hi, this is your Linux kernel regression tracker. Top-posting for once,
> to make this easily accessible to everyone.
> 
> I noticed this regression didn't make any progress
> 
> Matthias, is that because Nick didn't exactly do what you asked for (he
> afaics tried -next, but nevertheless patches it)? Or is there another
> reason?

I've also tried this on plain linux-next, also using the BPi-R64 and
can confirm the issue exists also there, without any additional patches
applied.

Reverting commit 6a17b3876b ("cpufreq: mediatek: Refine mtk_cpufreq_voltage_tracking()")
fixes the issue. Unfortunately, by now it no longer reverts cleanly and
requires a tiny amount of manual clean-up...

> 
> Ciao, Thorsten (wearing his 'the Linux kernel's regression tracker' hat)
> 
> P.S.: As the Linux kernel's regression tracker I deal with a lot of
> reports and sometimes miss something important when writing mails like
> this. If that's the case here, don't hesitate to tell me in a public
> reply, it's in everyone's interest to set the public record straight.
> 
> On 15.11.22 20:44, Nick wrote:
> > I used now the linux-next kernel tree (with
> > https://patchwork.ozlabs.org/project/linux-mtd/list/?series=327227 so
> > single uImage.FIT will work).
> >
> > Same issue:
> > 
> >> [ 0.886209] Kernel BUG at regulator_check_voltage+0xb0/0xf0 [verbose
> >> debug info unavailable]
> >>
> >> [ 0.894663] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
> >>
> >> [ 0.900759] Modules linked in:
> >>
> >> [ 0.903819] CPU: 1 PID: 79 Comm: kworker/1:1 Tainted: G S
> >> 6.1.0-rc5-next-20221115+ #0
> >>
> >> [ 0.904360] pstore: Using crash dump compression: deflate
> >>
> >> [ 0.913038] Hardware name: Bananapi BPI-R64 (DT)
> >>
> >> [ 0.913043] Workqueue: events dbs_work_handler
> >>
> >> [ 0.913056] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS
> >> BTYPE=--)
> >>
> >> [ 0.913063] pc : regulator_check_voltage+0xb0/0xf0
> >>
> >> [ 0.913070] lr : regulator_set_voltage_unlocked+0x88/0x110
> >>
> >> [ 0.913077] sp : ffffffc00cef3b30
> >>
> >> [ 0.913080] x29: ffffffc00cef3b30 x28: ffffff8006f6f800 x27:
> >> ffffff8006f6fa00
> >>
> >> [ 0.931243] mtk-pcie 1a143000.pcie: host bridge /pcie at 1a143000 ranges:
> >>
> >> [ 0.934474]
> >>
> >> [ 0.934475] x26: 00000000001312d0 x25: 0000000000000024
> >>
> >> [ 0.939298] mtk-pcie 1a143000.pcie: Parsing ranges property...
> >>
> >> [ 0.944730] x24: 0000000000118c30
> >>
> >> [ 0.948038] mtk-pcie 1a143000.pcie: MEM 0x0020000000..0x0027ffffff ->
> >> 0x0020000000
> >>
> >> [ 0.955155]
> >>
> >> [ 0.955157] x23: 0000000000149970 x22: ffffff8000861800 x21:
> >> ffffff8006f6f800
> >>
> >> [ 0.955166] x20: 00000000001312d0 x19: 0000000000000000 x18:
> >> 00000000cfad1bd3
> >>
> >> [ 0.955174] x17: 000000000000000c x16: 0000000000000005 x15:
> >> 0000000000000000
> >>
> >> [ 1.008473] x14: 0000000000000000 x13: 0000000000000165 x12:
> >> 0101010101010101
> >>
> >> [ 1.015608] x11: 00000000017d7840 x10: 0000000000000850 x9 :
> >> ffffffc00cef3900
> >>
> >> [ 1.017014] mmc0: new HS200 MMC card at address 0001
> >>
> >> [ 1.022740] x8 : ffffff8005ee9f30 x7 : 0000000000000001 x6 :
> >> 00000000001312d0
> >>
> >> [ 1.022748] x5 : 0000000000118c30 x4 : 0000000000000000 x3 :
> >> 0000000000000000
> >>
> >> [ 1.022756] x2 : ffffffc00cef3b68 x1 : ffffffc00cef3b6c
> >>
> >> [ 1.029034] mmcblk0: mmc0:0001 008G30 7.28 GiB
> >>
> >> [ 1.034833] x0 : ffffff8000861800
> >>
> >> [ 1.034838] Call trace:
> >>
> >> [ 1.044528] Alternate GPT is invalid, using primary GPT.
> >>
> >> [ 1.047175] regulator_check_voltage+0xb0/0xf0
> >>
> >> [ 1.052603] FIT: Selected configuration: "config-1" (OpenWrt
> >> bananapi_bpi-r64)
> >>
> >> [ 1.055090] regulator_set_voltage+0x3c/0x64
> >>
> >> [ 1.057539] FIT: kernel sub-image 0x00001000..0x005200f9 "kernel-1"
> >> (ARM64 OpenWrt Linux-6.1-rc2)
> >>
> >> [ 1.062824] mtk_cpufreq_voltage_tracking+0x12c/0x27c
> >>
> >> [ 1.062831] mtk_cpufreq_set_target+0x1c4/0x350
> >>
> >> [ 1.062837] __cpufreq_driver_target+0x2dc/0x660
> >>
> >> [ 1.067289] FIT: flat_dt sub-image 0x00521000..0x005272d9 "fdt-1"
> >> (ARM64 OpenWrt bananapi_bpi-r64 device tree blob)
> >>
> >> [ 1.074484] od_dbs_update+0xb8/0x19c
> >>
> >> [ 1.074490] dbs_work_handler+0x3c/0x7c
> >>
> >> [ 1.078774] FIT: filesystem sub-image 0x00528000..0x00829fff
> >> "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r64 rootfs)
> >>
> >> [ 1.088560] process_one_work+0x200/0x3a0
> >>
> >> [ 1.093624] mmcblk0: p1 p2 p3 p4 p65(rootfs-1) p66(rootfs_data) p128
> >>
> >> [ 1.098116] worker_thread+0x170/0x4c0
> >>
> >> [ 1.104575] mmcblk0boot0: mmc0:0001 008G30 4.00 MiB
> >>
> >> [ 1.114009] kthread+0xd4/0xe0
> >>
> >> [ 1.114016] ret_from_fork+0x10/0x20
> >>
> >> [ 1.114028] Code: 6b04001f 54fffe6b 2a0003e4 17fffff3 (d4210000)
> >>
> >> [ 1.114033] ---[ end trace 0000000000000000 ]---
> >> [ 0.878926] ------------[ cut here ]------------
> >>
> > 
> > Full log:
> > https://gist.github.com/PolynomialDivision/4a555079887b288f4795b28eb3607aa9
> > 
> > Big thanks to Daniel helping me to build a vanilla kernel with OpenWrt
> > build system.
> > 
> > Bests
> > Nick
> > 
> > On 11/10/22 12:26, Matthias Brugger wrote:
> >> Hi Nick,
> >>
> >> On 09/11/2022 14:35, Nick wrote:
> >>> Hi,
> >>> while trying to bump OpenWrt Kernel to 6.1rc2 I noticed that the
> >>> kernel is crashing while booting on a Banana Pi R64 (MT7622):
> >>>
> >>>> [    1.055565] ------------[ cut here ]------------
> >>>> [    1.060204] Kernel BUG at regulator_check_voltage+0xb0/0xf0
> >>>> [verbose debug info unavailable]
> >>>> [    1.062418] mtk-pcie 1a143000.pcie: host bridge /pcie at 1a143000
> >>>> ranges:
> >>>> [    1.068656] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
> >>>> [    1.075248] mtk-pcie 1a143000.pcie: Parsing ranges property...
> >>>> [    1.081257] Modules linked in:
> >>>> [    1.081264] CPU: 1 PID: 328 Comm: kworker/1:7 Tainted: G
> >>>> S                 6.1-rc2 #0
> >>>> [    1.087088] mtk-pcie 1a143000.pcie:      MEM
> >>>> 0x0020000000..0x0027ffffff -> 0x0020000000
> >>>> [    1.090126] Hardware name: Bananapi BPI-R64 (DT)
> >>>> [    1.110541] Workqueue: events dbs_work_handler
> >>>> [    1.114988] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS
> >>>> BTYPE=--)
> >>>> [    1.121944] pc : regulator_check_voltage+0xb0/0xf0
> >>>> [    1.126728] lr : regulator_set_voltage_unlocked+0x88/0x110
> >>>> [    1.129638] mmc1: host does not support reading read-only switch,
> >>>> assuming write-enable
> >>>> [    1.132207] sp : ffffffc00956bb30
> >>>> [    1.132209] x29: ffffffc00956bb30 x28: ffffff8000efb400 x27:
> >>>> 0000000000000024
> >>>> [    1.132219] x26: 00000000001312d0 x25: 0000000000118c30 x24:
> >>>> 00000000001312d0
> >>>> [    1.132227] x23: 0000000000149970
> >>>> [    1.146036] mmc1: new high speed SDHC card at address e624
> >>>> [    1.150642]  x22: ffffff800038f800
> >>>> [    1.159192] mmcblk1: mmc1:e624 SL16G 14.8 GiB
> >>>> [    1.161068]  x21: ffffff8000efb100
> >>>> [    1.161072] x20: 00000000001312d0
> >>>> [    1.175424] GPT:partition_entry_array_crc32 values don't match:
> >>>> 0xa0b5ce6d != 0xab54d286
> >>>> [    1.177757]  x19: 0000000000000000 x18: 00000000799b2550
> >>>> [    1.181067] GPT:Primary header thinks Alt. header is not at the
> >>>> end of the disk.
> >>>> [    1.189143] x17: 0000000000000003 x16: 0000000000000001 x15:
> >>>> 0000000000000000
> >>>> [    1.189151] x14: 0000000000000000 x13: 0000000000000146 x12:
> >>>> 00000000fa83b2da
> >>>> [    1.189159] x11: 000000000000013d x10: 0000000000000850
> >>>> [    1.194472] GPT:305184 != 31116287
> >>>> [    1.201842]  x9 : ffffffc00956b910
> >>>> [    1.201846] x8 : ffffff8000b9edf0 x7 : 0000000000000001
> >>>> [    1.208970] GPT:Alternate GPT header not at the end of the disk.
> >>>> [    1.216092]  x6 : 00000000001312d0
> >>>> [    1.216095] x5 : 0000000000118c30 x4 : 0000000000000000 x3 :
> >>>> 0000000000000000
> >>>> [    1.216103] x2 : ffffffc00956bb68 x1 : ffffffc00956bb6c
> >>>> [    1.221321] GPT:305184 != 31116287
> >>>> [    1.224706]  x0 : ffffff800038f800
> >>>> [    1.228095] GPT: Use GNU Parted to correct GPT errors.
> >>>> [    1.233307]
> >>>> [    1.233309] Call trace:
> >>>> [    1.233312]  regulator_check_voltage+0xb0/0xf0
> >>>> [    1.242680] FIT: Selected configuration:
> >>>> "config-mt7622-bananapi-bpi-r64-pcie1" (OpenWrt bananapi_bpi-r64
> >>>> with mt7622-bananapi-bpi-r64-pcie1)
> >>>> [    1.242694]  regulator_set_voltage+0x3c/0x64
> >>>> [    1.249831] FIT:           kernel sub-image
> >>>> 0x00001000..0x0052fd0a "kernel-1" (ARM64 OpenWrt Linux-6.1-rc2)
> >>>> [    1.255030]  mtk_cpufreq_voltage_tracking+0x11c/0x26c
> >>>> [    1.255039]  mtk_cpufreq_set_target+0x1c4/0x350
> >>>> [    1.258444] FIT:          flat_dt sub-image
> >>>> 0x00530000..0x005380c5 "fdt-1" (ARM64 OpenWrt bananapi_bpi-r64
> >>>> device tree blob)
> >>>> [    1.261820]  __cpufreq_driver_target+0x2f4/0x674
> >>>> [    1.261826]  od_dbs_update+0xb8/0x19c
> >>>> [    1.266969] FIT:          flat_dt sub-image
> >>>> 0x00539000..0x0053911a "fdt-mt7622-bananapi-bpi-r64-pcie1" (ARM64
> >>>> OpenWrt bananapi_bpi-r64 device tree overlay
> >>>> mt7622-bananapi-bpi-r64-pcie1)
> >>>> [    1.268431]  dbs_work_handler+0x3c/0x7c
> >>>> [    1.270883] FIT:          flat_dt sub-image
> >>>> 0x0053a000..0x0053a20f "fdt-mt7622-bananapi-bpi-r64-sata" (ARM64
> >>>> OpenWrt bananapi_bpi-r64 device tree overlay
> >>>> mt7622-bananapi-bpi-r64-sata)
> >>>> [    1.275297]  process_one_work+0x200/0x3a0
> >>>> [    1.287998] FIT:       filesystem sub-image
> >>>> 0x0053b000..0x00859fff "rootfs-1" (ARM64 OpenWrt bananapi_bpi-r64
> >>>> rootfs)
> >>>> [    1.292237]  worker_thread+0x170/0x4c0
> >>>> [    1.292244]  kthread+0xd4/0xe0
> >>>> [    1.302066] FIT: selecting configured loadable "rootfs-1" to be
> >>>> root filesystem
> >>>> [    1.307092]  ret_from_fork+0x10/0x20
> >>>> [    1.311631]  mmcblk1: p1 p2 p3 p4 p5 p6 p65(rootfs-1)
> >>>> p66(rootfs_data) p128
> >>>> [    1.322903] Code: 6b04001f 54fffe6b 2a0003e4 17fffff3 (d4210000)
> >>>> [    1.413322] ---[ end trace 0000000000000000 ]---
> >>> The complete log can be found here:
> >>> https://gist.githubusercontent.com/PolynomialDivision/395d009c84b426d780549c5fa1f64ff1/raw/886d621d2bf6f03429586adf8a14a6c37c8d8a7d/mt7622-6-1.log
> >>>
> >>> Reverting commit "cpufreq: mediatek: Refine
> >>> mtk_cpufreq_voltage_tracking()" fixes the kernel bug:
> >>> https://github.com/torvalds/linux/commit/6a17b3876bc8303612d7ad59ecf7cbc0db418bcd
> >>>
> >>> The revert commit can be found here:
> >>> https://github.com/PolynomialDivision/openwrt/commit/1df941d0334000e3aced43b7d50cdac0da8bf427
> >>>
> >>> The branch I use to build the 6.1rc2 on a Banana Pi R64 can be found
> >>> here:
> >>> https://github.com/PolynomialDivision/openwrt/commits/bump-mt7622-rebase
> >>>
> >>
> >> Thanks for the report.
> >> Could you test with a plain upstream kernel? That would help us to
> >> verify that this is a upstream problem and not introduced by some
> >> openwrt patches.
> >>
> >> Regards,
> >> Matthias
> 
> #regzbot ignore-activity