[PATCH v4 3/5] iommu/io-pgtable: Add DART subpage protection support

[Janne Grunau]

From: Sven Peter <sven at svenpeter.dev>

DART allows to only expose a subpage to the device. While this is an
optional feature on the M1 DARTs the new ones present on the Pro/Max
models require this field in every PTE.

Signed-off-by: Sven Peter <sven at svenpeter.dev>
Signed-off-by: Janne Grunau <j at jannau.net>

---

(no changes since v3)

Changes in v3:
- apply change to io-pgtable-dart.c

 drivers/iommu/io-pgtable-dart.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/iommu/io-pgtable-dart.c b/drivers/iommu/io-pgtable-dart.c
index 43ef375812e6..659dd9e83d2c 100644
--- a/drivers/iommu/io-pgtable-dart.c
+++ b/drivers/iommu/io-pgtable-dart.c
@@ -14,6 +14,7 @@
 #define pr_fmt(fmt)	"dart io-pgtable: " fmt
 
 #include <linux/atomic.h>
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/io-pgtable.h>
 #include <linux/kernel.h>
@@ -40,6 +41,9 @@
 #define DART_PTES_PER_TABLE(d)					\
 	(DART_GRANULE(d) >> ilog2(sizeof(dart_iopte)))
 
+#define APPLE_DART_PTE_SUBPAGE_START   GENMASK_ULL(63, 52)
+#define APPLE_DART_PTE_SUBPAGE_END     GENMASK_ULL(51, 40)
+
 #define APPLE_DART1_PADDR_MASK	GENMASK_ULL(35, 12)
 
 /* Apple DART1 protection bits */
@@ -109,6 +113,10 @@ static int dart_init_pte(struct dart_io_pgtable *data,
 			return -EEXIST;
 		}
 
+	/* subpage protection: always allow access to the entire page */
+	pte |= FIELD_PREP(APPLE_DART_PTE_SUBPAGE_START, 0);
+	pte |= FIELD_PREP(APPLE_DART_PTE_SUBPAGE_END, 0xfff);
+
 	pte |= APPLE_DART1_PTE_PROT_SP_DIS;
 	pte |= APPLE_DART_PTE_VALID;
 
-- 
2.35.1