[PATCH 2/3] drm/mediatek: Add gamma lut support for mt8195
zheng-yan.chen
zheng-yan.chen at mediatek.com
Mon Aug 29 23:33:07 PDT 2022
On Wed, 2022-08-24 at 15:03 +0800, zheng-yan.chen wrote:
> On Tue, 2022-08-23 at 11:18 +0800, CK Hu wrote:
> > Hi, Zheng-yan:
> >
> > On Mon, 2022-08-22 at 17:19 +0800, zheng-yan.chen wrote:
> > > Since the previous gamma_set_common() function is designed for
> > > 9bit-to-10bit conversion, which is not feasible for the
> > > 10bit-to-12bit conversion in mt8195.
> > >
> > > Update the function to fit the need of mt8195.
> > >
> >
> > Add Fixes tag [1].
> >
> > [1]
> >
https://www.kernel.org/doc/html/v5.19/process/submitting-patches.html
> >
> >
> > > Signed-off-by: zheng-yan.chen <zheng-yan.chen at mediatek.com>
> > >
> > > ---
> > > drivers/gpu/drm/mediatek/mtk_disp_aal.c | 2 +-
> > > drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 +-
> > > drivers/gpu/drm/mediatek/mtk_disp_gamma.c | 97
> > > ++++++++++++++++-
> > > --
> > > --
> > > drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 5 +-
> > > drivers/gpu/drm/mediatek/mtk_drm_crtc.h | 1 -
> > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 1 +
> > > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
> > > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 2 +
> > > 8 files changed, 83 insertions(+), 29 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_aal.c
> > > b/drivers/gpu/drm/mediatek/mtk_disp_aal.c
> > > index 0f9d7efb61d7..f46d4ab73d6a 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_aal.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_aal.c
> > > @@ -66,7 +66,7 @@ void mtk_aal_gamma_set(struct device *dev,
> > > struct
> > > drm_crtc_state *state)
> > > struct mtk_disp_aal *aal = dev_get_drvdata(dev);
> > >
> > > if (aal->data && aal->data->has_gamma)
> > > - mtk_gamma_set_common(aal->regs, state, false);
> > > + mtk_gamma_set_common(aal->regs, state);
> > > }
> > >
> > > void mtk_aal_start(struct device *dev)
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > index 33e61a136bbc..b662bf8b1c9d 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> > > @@ -51,8 +51,9 @@ void mtk_gamma_clk_disable(struct device *dev);
> > > void mtk_gamma_config(struct device *dev, unsigned int w,
> > > unsigned int h, unsigned int vrefresh,
> > > unsigned int bpc, struct cmdq_pkt *cmdq_pkt);
> > > +unsigned int mtk_gamma_size(struct device *dev);
> > > void mtk_gamma_set(struct device *dev, struct drm_crtc_state
> > > *state);
> > > -void mtk_gamma_set_common(void __iomem *regs, struct
> > > drm_crtc_state
> > > *state, bool lut_diff);
> > > +void mtk_gamma_set_common(void __iomem *regs, struct
> > > drm_crtc_state
> > > *state);
> > > void mtk_gamma_start(struct device *dev);
> > > void mtk_gamma_stop(struct device *dev);
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
> > > b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
> > > index bbd558a036ec..a842e5e1962e 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_disp_gamma.c
> > > @@ -18,18 +18,26 @@
> > > #define DISP_GAMMA_EN 0x0000
> > > #define GAMMA_EN BIT(0)
> > > #define DISP_GAMMA_CFG 0x0020
> > > +#define RELAY_MODE BIT(0)
> > > #define GAMMA_LUT_EN BIT(1)
> > > #define GAMMA_DITHERING BIT(2)
> > > #define DISP_GAMMA_SIZE 0x0030
> > > +#define DISP_GAMMA_BANK 0x0100
> > > #define DISP_GAMMA_LUT 0x0700
> > > -
> > > +#define DISP_GAMMA_LUT1 0x0b00
> > > #define LUT_10BIT_MASK 0x03ff
> > > -
> > > +#define TABLE_9BIT_SIZE 512
> > > +#define LUT_12BIT_MASK 0x0fff
> > > +#define TABLE_10BIT_SIZE 1024
> > > +#define BANK_SIZE 256
> > > struct mtk_disp_gamma_data {
> > > bool has_dither;
> > > bool lut_diff;
> > > + unsigned int lut_size;
> > > };
> > >
> > > +static unsigned int now_lut_size;
> > > +static bool now_lut_diff;
> >
> > Don't use global variable.
> >
> > > /*
> > > * struct mtk_disp_gamma - DISP_GAMMA driver structure
> > > */
> > > @@ -54,40 +62,73 @@ void mtk_gamma_clk_disable(struct device
> > > *dev)
> > > clk_disable_unprepare(gamma->clk);
> > > }
> > >
> > > -void mtk_gamma_set_common(void __iomem *regs, struct
> > > drm_crtc_state
> > > *state, bool lut_diff)
> > > +void mtk_gamma_set_common(void __iomem *regs, struct
> > > drm_crtc_state
> > > *state)
> > > {
> > > - unsigned int i, reg;
> > > - struct drm_color_lut *lut;
> > > + unsigned int i, reg, idx;
> > > void __iomem *lut_base;
> > > - u32 word;
> > > - u32 diff[3] = {0};
> > > + void __iomem *lut1_base;
> > > + u32 word, word1;
> > >
> > > if (state->gamma_lut) {
> > > + u32 table_size;
> > > + u32 mask;
> > > + struct drm_color_lut color, even, odd;
> > > + struct drm_color_lut *lut = (struct drm_color_lut
> > > *)state->gamma_lut;
> > > + bool lut_12bit = (now_lut_size == TABLE_10BIT_SIZE);
> > > +
> > > reg = readl(regs + DISP_GAMMA_CFG);
> > > + reg = reg & ~RELAY_MODE;
> >
> > Why do you modify this for other SoC?
> >
> > > reg = reg | GAMMA_LUT_EN;
> > > writel(reg, regs + DISP_GAMMA_CFG);
> > > lut_base = regs + DISP_GAMMA_LUT;
> > > - lut = (struct drm_color_lut *)state->gamma_lut->data;
> > > - for (i = 0; i < MTK_LUT_SIZE; i++) {
> > > + lut1_base = regs + DISP_GAMMA_LUT1;
> > > + if (lut_12bit) {
> > > + table_size = TABLE_10BIT_SIZE;
> > > + mask = LUT_12BIT_MASK;
> >
> > lut_bits and lut_size are independent factor, so use two variable
> > in
> > private data for each. And I like to use digital value instead of a
> > symbol.
> >
> > lut_bits = 10 or 12;
> > lut_size = 512 or 1024;
> > mask = GENMASK(lut_bits - 1, 0);
> >
> > > + } else {
> > > + table_size = TABLE_9BIT_SIZE;
> > > + mask = LUT_10BIT_MASK;
> > > + }
> > >
> > > - if (!lut_diff || (i % 2 == 0)) {
> > > - word = (((lut[i].red >> 6) &
> > > LUT_10BIT_MASK) << 20) +
> > > - (((lut[i].green >> 6) &
> > > LUT_10BIT_MASK) << 10) +
> > > - ((lut[i].blue >> 6) &
> > > LUT_10BIT_MASK);
> > > + for (i = 0; i < table_size; i++) {
> > > + if (!(i % BANK_SIZE) && lut_12bit)
> > > + writel((i / BANK_SIZE), regs +
> > > DISP_GAMMA_BANK);
> >
> > Group register writing together, so move this to bottom of this
> > for-
> > loop.
> >
> > > +
> > > + color.red = (lut[i].red >> 6) & mask;
> > > + color.green = (lut[i].green >> 6) & mask;
> > > + color.blue = (lut[i].blue >> 6) & mask;
> >
> > Why shift 6 bits for lut 12 bits?
> >
> > > + if ((i % 2) && now_lut_diff) {
> >
> > In original code, !lut_diff is first, so I would like you to keep
> > this
> > order.
> >
> > > + odd = color;
> > > + word = (lut_12bit) ? (((odd.green -
> > > even.green) << 12) +
> > > + (odd.red -
> > > even.red))
> > > + : (((odd.red -
> > > even.red) << 20) +
> > > + ((odd.green -
> > > even.green) << 10) +
> > > + (odd.blue -
> > > even.blue));
> > > + word1 = (odd.blue - even.blue);
> >
> > I think it's not necessary to create odd and even variable.
> >
> > Regards,
> > CK
> >
> > > } else {
> > > - diff[0] = (lut[i].red >> 6) - (lut[i -
> > > 1].red >> 6);
> > > - diff[1] = (lut[i].green >> 6) - (lut[i
> > > - 1].green >> 6);
> > > - diff[2] = (lut[i].blue >> 6) - (lut[i -
> > > 1].blue >> 6);
> > > -
> > > - word = ((diff[0] & LUT_10BIT_MASK) <<
> > > 20) +
> > > - ((diff[1] & LUT_10BIT_MASK) <<
> > > 10) +
> > > - (diff[2] & LUT_10BIT_MASK);
> > > + even = color;
> > > + word = (lut_12bit) ? ((even.green <<
> > > 12) + even.red)
> > > + : ((even.red << 20)
> > > +
> > > + (even.green <<
> > > 10) + even.blue);
> > > + word1 = even.blue;
> > > }
> > > - writel(word, (lut_base + i * 4));
> > > + idx = (lut_12bit) ? (i % BANK_SIZE) : i;
> > > + writel(word, (lut_base + idx * 4));
> > > + if (lut_12bit)
> > > + writel(word1, (lut1_base + idx * 4));
> > > }
> > > }
> > > }
> > >
> > > +unsigned int mtk_gamma_size(struct device *dev)
> > > +{
> > > + struct mtk_disp_gamma *gamma = dev_get_drvdata(dev);
> > > +
> > > + if (gamma->data)
> > > + return gamma->data->lut_size;
> > > + else
> > > + return 0;
> > > +}
> > > void mtk_gamma_set(struct device *dev, struct drm_crtc_state
> > > *state)
> > > {
> > > struct mtk_disp_gamma *gamma = dev_get_drvdata(dev);
> > > @@ -95,8 +136,7 @@ void mtk_gamma_set(struct device *dev, struct
> > > drm_crtc_state *state)
> > >
> > > if (gamma->data)
> > > lut_diff = gamma->data->lut_diff;
> > > -
> > > - mtk_gamma_set_common(gamma->regs, state, lut_diff);
> > > + mtk_gamma_set_common(gamma->regs, state);
> > > }
> > >
> > > void mtk_gamma_config(struct device *dev, unsigned int w,
> > > @@ -178,6 +218,8 @@ static int mtk_disp_gamma_probe(struct
> > > platform_device *pdev)
> > > ret = component_add(dev, &mtk_disp_gamma_component_ops);
> > > if (ret)
> > > dev_err(dev, "Failed to add component: %d\n", ret);
> > > + now_lut_size = priv->data->lut_size;
> > > + now_lut_diff = priv->data->lut_diff;
> > >
> > > return ret;
> > > }
> > > @@ -191,10 +233,17 @@ static int mtk_disp_gamma_remove(struct
> > > platform_device *pdev)
> > >
> > > static const struct mtk_disp_gamma_data mt8173_gamma_driver_data
> > > =
> > > {
> > > .has_dither = true,
> > > + .lut_size = 512,
> > > };
> > >
> > > static const struct mtk_disp_gamma_data mt8183_gamma_driver_data
> > > =
> > > {
> > > .lut_diff = true,
> > > + .lut_size = 512,
> > > +};
> > > +
> > > +static const struct mtk_disp_gamma_data mt8195_gamma_driver_data
> > > =
> > > {
> > > + .lut_diff = true,
> > > + .lut_size = 1024,
> > > };
> > >
> > > static const struct of_device_id
> > > mtk_disp_gamma_driver_dt_match[]
> > > =
> > > {
> > > @@ -202,6 +251,8 @@ static const struct of_device_id
> > > mtk_disp_gamma_driver_dt_match[] = {
> > > .data = &mt8173_gamma_driver_data},
> > > { .compatible = "mediatek,mt8183-disp-gamma",
> > > .data = &mt8183_gamma_driver_data},
> > > + { .compatible = "mediatek,mt8195-disp-gamma",
> > > + .data = &mt8195_gamma_driver_data},
> > > {},
> > > };
> > > MODULE_DEVICE_TABLE(of, mtk_disp_gamma_driver_dt_match);
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > index 42cc7052b050..2a6513259562 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> > > @@ -930,9 +930,8 @@ int mtk_drm_crtc_create(struct drm_device
> > > *drm_dev,
> > > mtk_crtc->ddp_comp[i] = comp;
> > >
> > > if (comp->funcs) {
> > > - if (comp->funcs->gamma_set)
> > > - gamma_lut_size = MTK_LUT_SIZE;
> > > -
> > > + if (comp->funcs->gamma_set && comp->funcs-
> > > > gamma_size)
> > >
> > > + gamma_lut_size = comp->funcs-
> > > > gamma_size(comp->dev);
> > >
> > > if (comp->funcs->ctm_set)
> > > has_ctm = true;
> > > }
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > > b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > > index cb9a36c48d4f..1799853ef89a 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.h
> > > @@ -10,7 +10,6 @@
> > > #include "mtk_drm_ddp_comp.h"
> > > #include "mtk_drm_plane.h"
> > >
> > > -#define MTK_LUT_SIZE 512
> > > #define MTK_MAX_BPC 10
> > > #define MTK_MIN_BPC 3
> > >
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > index 2d72cc5ddaba..4c6538a17b88 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> > > @@ -323,6 +323,7 @@ static const struct mtk_ddp_comp_funcs
> > > ddp_gamma
> > > = {
> > > .clk_enable = mtk_gamma_clk_enable,
> > > .clk_disable = mtk_gamma_clk_disable,
> > > .gamma_set = mtk_gamma_set,
> > > + .gamma_size = mtk_gamma_size,
> > > .config = mtk_gamma_config,
> > > .start = mtk_gamma_start,
> > > .stop = mtk_gamma_stop,
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > > b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > > index 2d0052c23dcb..bf0cf7f86010 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> > > @@ -59,6 +59,7 @@ struct mtk_ddp_comp_funcs {
> > > void (*disable_vblank)(struct device *dev);
> > > unsigned int (*supported_rotations)(struct device *dev);
> > > unsigned int (*layer_nr)(struct device *dev);
> > > + unsigned int (*gamma_size)(struct device *dev);
> > > int (*layer_check)(struct device *dev,
> > > unsigned int idx,
> > > struct mtk_plane_state *state);
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > index 0e4c77724b05..473766be56e1 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> > > @@ -567,6 +567,8 @@ static const struct of_device_id
> > > mtk_ddp_comp_dt_ids[] = {
> > > .data = (void *)MTK_DISP_GAMMA, },
> > > { .compatible = "mediatek,mt8183-disp-gamma",
> > > .data = (void *)MTK_DISP_GAMMA, },
> > > + { .compatible = "mediatek,mt8195-disp-gamma",
> > > + .data = (void *)MTK_DISP_GAMMA, },
> > > { .compatible = "mediatek,mt8195-disp-merge",
> > > .data = (void *)MTK_DISP_MERGE },
> > > { .compatible = "mediatek,mt2701-disp-mutex",
> >
> >
>
> 1.
>
> > +static unsigned int now_lut_size;
> > +static bool now_lut_diff;
>
> Don't use global variable.
>
>
>
> This two variables are only used in mtk_gamma_set_common()
> function, which is called by only mtk_aal_gamma_set() and
> mtk_gamma_set().
>
> Change definition of mtk_gamma_set_common() to something like
> mtk_gamma_set_common( ..., dev)
> to bring in "lut_size" and "lut_diff" from dev
> private data.
>
> 2.
>
> void mtk_gamma_set_common(void __iomem *regs, struct drm_crtc_state
> > *state)
> > {
> > - unsigned int i, reg;
> > - struct drm_color_lut *lut;
> > + unsigned int i, reg, idx;
> > void __iomem *lut_base;
> > - u32 word;
> > - u32 diff[3] = {0};
> > + void __iomem *lut1_base;
> > + u32 word, word1;
> >
> > if (state->gamma_lut) {
> > + u32 table_size;
> > + u32 mask;
> > + struct drm_color_lut color, even, odd;
> > + struct drm_color_lut *lut = (struct drm_color_lut
> > *)state->gamma_lut;
> > + bool lut_12bit = (now_lut_size == TABLE_10BIT_SIZE);
> > +
> > reg = readl(regs + DISP_GAMMA_CFG);
> > + reg = reg & ~RELAY_MODE;
>
> Why do you modify this for other SoC?
>
>
> Originally, gamma config initialization is in
> mtk_gamma_config() , this function would write GAMMA_DITHERING into
> gamma_CFG if .has_dither flag is true.
>
> This writing actually shut down the relay mode of gamma, thus,
> in the original version only need to set GAMMA_LUT_EN to make use of
> gamma.
>
> However, now .has_dither is false, which means
> mtk_gamma_config() won't modify gamma_CFG anymore.
>
> Therefore, I added above code to manually shut down relay mode,
> to ensure it running properly.
>
>
>
>
> 3.
>
> reg = reg | GAMMA_LUT_EN;
> > writel(reg, regs + DISP_GAMMA_CFG);
> > lut_base = regs + DISP_GAMMA_LUT;
> > - lut = (struct drm_color_lut *)state->gamma_lut->data;
> > - for (i = 0; i < MTK_LUT_SIZE; i++) {
> > + lut1_base = regs + DISP_GAMMA_LUT1;
> > + if (lut_12bit) {
> > + table_size = TABLE_10BIT_SIZE;
> > + mask = LUT_12BIT_MASK;
>
> lut_bits and lut_size are independent factor, so use two variable in
> private data for each. And I like to use digital value instead of a
> symbol.
>
> lut_bits = 10 or 12;
> lut_size = 512 or 1024;
> mask = GENMASK(lut_bits - 1, 0);
>
> > + }
>
>
> OK, I will fix it.
>
>
>
> 4.
>
> > + for (i = 0; i < table_size; i++) {
> > + if (!(i % BANK_SIZE) && lut_12bit)
> > + writel((i / BANK_SIZE), regs +
> > DISP_GAMMA_BANK);
>
> Group register writing together, so move this to bottom of this for-
> loop.
>
>
> OK, I will fix it.
>
>
>
> 5.
>
> > + color.red = (lut[i].red >> 6) & mask;
> > + color.green = (lut[i].green >> 6) & mask;
> > + color.blue = (lut[i].blue >> 6) & mask;
>
> Why shift 6 bits for lut 12 bits?
>
>
> After testing, I find that right-shift 6bits and mask the
> Least-Significant(LS) 12bits bring the correct results.
>
> It actually make more sense to right-shift 4bits to gain the
> 12bits, however, when I did this, the results failed.
>
> I wonder if this is the test data problem, since the original
> test data is for mt8183 10bit lut.
>
> I will contact with designer and try to figure it out.
Hello CK,
I have asked the designers about the shift-bits problem and get the
answer.
The bits should be shifted 4 bits instead of 6 bits, the reason why I
need to shift 6 bits to get the correct results is that the test data
is for mt8183 but not for mt8195.
I will revise the code about this part and send v2 later today.
Thanks for your advices again!
Best Regards,
Zheng-Yan Chen
>
>
>
> 6.
> > + if ((i % 2) && now_lut_diff) {
>
> In original code, !lut_diff is first, so I would like you to keep
> this
> order.
>
>
> OK, I will fix it.
>
>
>
> 7.
> + odd = color;
> > + word = (lut_12bit) ? (((odd.green -
> > even.green) << 12) +
> > + (odd.red -
> > even.red))
> > + : (((odd.red -
> > even.red) << 20) +
> > + ((odd.green -
> > even.green) << 10) +
> > + (odd.blue -
> > even.blue));
> > + word1 = (odd.blue - even.blue);
>
> I think it's not necessary to create odd and even variable.
>
> Regards,
> CK
>
>
> OK, I will fix it.
More information about the linux-arm-kernel
mailing list