[PATCH] spi: stm32-qspi: Fix pm_runtime management in stm32_qspi_transfer_one_message()

[patrice.chotard at foss.st.com]

From: Patrice Chotard <patrice.chotard at foss.st.com>

ctrl->auto_runtime_pm was wrongly set to true when adding
transfer_one_message() callback.
As explained in commit 6e6ccb3d4cdc ("spi: stm32-qspi: Add pm_runtime support")
the expected behavior is to prevent runtime suspends between each transfer.

Add needed pm_runtime API calls in stm32_qspi_transfer_one_message().

Fixes: a557fca630cc ("spi: stm32_qspi: Add transfer_one_message() spi callback")

Signed-off-by: Patrice Chotard <patrice.chotard at foss.st.com>
---
 drivers/spi/spi-stm32-qspi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 679fd1c34f7e..227f450aa5f0 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -567,6 +567,10 @@ static int stm32_qspi_transfer_one_message(struct spi_controller *ctrl,
 	if (!spi->cs_gpiod)
 		return -EOPNOTSUPP;
 
+	ret = pm_runtime_resume_and_get(qspi->dev);
+	if (ret < 0)
+		return ret;
+
 	mutex_lock(&qspi->lock);
 
 	gpiod_set_value_cansleep(spi->cs_gpiod, true);
@@ -629,6 +633,9 @@ static int stm32_qspi_transfer_one_message(struct spi_controller *ctrl,
 	msg->status = ret;
 	spi_finalize_current_message(ctrl);
 
+	pm_runtime_mark_last_busy(qspi->dev);
+	pm_runtime_put_autosuspend(qspi->dev);
+
 	return ret;
 }
 
@@ -847,7 +854,6 @@ static int stm32_qspi_probe(struct platform_device *pdev)
 	ctrl->mem_ops = &stm32_qspi_mem_ops;
 	ctrl->use_gpio_descriptors = true;
 	ctrl->transfer_one_message = stm32_qspi_transfer_one_message;
-	ctrl->auto_runtime_pm = true;
 	ctrl->num_chipselect = STM32_QSPI_MAX_NORCHIP;
 	ctrl->dev.of_node = dev->of_node;
 
-- 
2.25.1